Description
The all-new Bambu Lab PETG Basic has been upgraded to deliver PLA-level strength while maintaining its signature toughness. This makes it ideal for structural and functional parts that need to handle higher stress without becoming brittle.
With improved resistance to water, UV, and temperature, it remains an excellent choice for outdoor accessories, functional tools, and everyday-use models. The refined formulation also improves printability by reducing stringing and producing smoother surface finishes, so you get the benefits of PETG with fewer tradeoffs.
Features
Stronger Than Ever, Yet Still Tough
Thanks to its upgraded formula, Bambu Lab PETG Basic now matches the strength of PLA Basic while retaining the toughness needed to absorb impacts. It can handle greater loads and stress than before, making it well suited for structural household parts and practical tools such as holders, wall hooks, brackets, and clips.
A Cost-Effective Choice for Outdoor Prints
Engineered for long-lasting performance in outdoor environments, Bambu Lab PETG Basic combines durability with affordability. Its strong resistance to water, UV, and temperature makes it a highly cost-effective option for outdoor applications. From garden labels to bathroom accessories, it’s a practical, budget-friendly choice for prints that need to withstand everyday conditions.
Less Stringing, Superior Surface
The all-new Bambu Lab PETG Basic shows reduced stringing thanks to its lower sensitivity to moisture compared to typical PETG filaments, resulting in smoother surfaces and crisper details.
*Drying is still recommended to optimize printing results. For more details, please refer to the Printing Tips.
RFID for Intelligent Printing
All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System). Load and print! No more tedious setting steps.
Printing Tips
1. Dry out before use for higher printing quality. If PETG Basic has been exposed to air with relative humidity above 50% for more than 72 hours, please dry it thoroughly according to the instructions before printing to ensure optimal print quality.
Drying conditions before printing
-
Blast Drying Oven: 65°C for 8 hours
-
X1 Series & P Series & H2 Series Heatbed: 80°C for 12 hours
-
AMS 2 Pro & AMS HT: 65°C for 8 hours
Printing and storage humidity
2. PETG Basic adheres strongly to the PEI plate. After printing, please wait for the plate to cool down before removing the model to avoid damaging the bottom surface.
3. For more printing tips, please refer to the
Wiki.
Accessory Compatibility (Recommended)
AMS Series: AMS, AMS 2 Pro, AMS HT & AMS lite
Build Plate: Cool Plate SuperTack, Smooth PEI Plate, Textured PEI Plate
Hotend: All Size / Material
Specifications
Diameter: 1.75 mm±0.03 mm
Printing Temperature: 230°C−260°C
Bed Temperature: 65°C−80°C
Max Printing Speed: 200−300 mm/s
Tensile Strength: 34±3 MPa
Density: 1.27 g/cm3
Safety Precautions
-
Always print in a well-ventilated area.
-
Avoid breathing the fumes while printing.
-
Do not touch the nozzle, heated bed, or printed object right after printing — let it cool down first before handling.
-
Keep the printer and filament away from children and pets.
-
Unplug the printer when not in use.
-
Store the filament in a cool, dry place to avoid moisture.
-
Wear gloves and a mask when sanding, cutting, or handling printed parts.
-
Keep away from open flames — most filaments are flammable.
PETG
- Low odor but still print with airflow or ventilation.
- Allow the printed part to cool down before removing or handling.
Safety Data Sheet
Bambu Lab PETG Basic Filament
