Description
Anycubic PLA Marble is engineered to provide a realistic stone and granite texture without the post-processing required for stone-effect paints. The inclusion of uniform marble particles naturally diffuses light, which effectively conceals layer lines and gives your prints a carved appearance.
This filament is optimized for Intelligent Identification via Anycubic's ACE Pro ecosystem. Each spool includes an RFID chip that automatically configures your printer's settings (temperature, speed, and flow) to account for the specialized particle density of the marble effect, ensuring a clog-free experience.
Features
Looks Just Like Marble
Anycubic PLA Marble is a filament that mimics the appearance of natural stone. Its composition includes genuine marble particles, giving prints realistic marble and granite textures.
Minimal Layer Lines
Anycubic PLA Marble produces prints with a matte finish. Its texture naturally softens the contrast at layer line edges, effectively concealing layer lines compared to smooth-surfaced standard PLA prints.
Details that Worth Taking a Closer Look
Anycubic PLA Marble produces prints with a matte finish. lts texture naturally softens the contrast at layer line edges, effectively concealing layer lines compared to smooth-surfaced standard PLA prints.
Less Prone to Clogging
Anycubic PLA marble features uniform marble particles in a precise ratio. This enhances extrusion consistency and reduces the risk of nozzle blockages.
Boosting Efficiency with Intelligent Identification
The filaments feature intelligent identification chips that integrate seamlessly with the ACE Pro, allowing for automatic identification of printing information and enhancing the printing experience.
Reusable Filament Spool
The reusable filament spool incorporates a threaded connection system engineered for enhanced stability when paired with spool-free filaments. This design significantly reduces the risk of entanglement, filament scattering, and operational errors.
Specifications
Dry Out Before Use: Recommended
Drying Condition: 55-65 ℃, 6-8 h
ACE Compatibility: Compatible
Nozzle Size: Recommended 0.4 mm or above
Printing Temperature: 200-230 ℃
Heated Bed Temperature: 55-65 ℃
Recommended Printing Speed: 40-250 mm/s
Cooling Time: 10 s
Maximum Volume Speed (Flow Rate): 12 mm³/s
Density: 1.37 g/cm³
Melt Index: 29±3 g/10 min (210 ℃/2.16 kg)
Melting Point Temperature: 161 ℃
Vicat Softening Temperature: 56 ℃
Heat Deflection Temperature (0.45MPa): 54 ℃
Young's Modulus: 2500±200 Mpa
Tensile Strength: 45±3 Mpa
Elongation at Break: 12±2%
Bending Modulus: 3300±200 Mpa
Bending Strength: 75±2 MPa
lzod lmpact Strength (X-Y): 25±3 kJ/m²
Tensile Strength (Z): 25±1 MPa
Filament Type: Aesthetic filaments
Recommend to Print: Stone models, castles, statue
Intelligent Identification: Supported
Reusable Filament Spool: Supported
Safety Precautions
-
Always print in a well-ventilated area.
-
Avoid breathing the fumes while printing.
-
Do not touch the nozzle, heated bed, or printed object right after printing — let it cool down first before handling.
-
Keep the printer and filament away from children and pets.
-
Unplug the printer when not in use.
-
Store the filament in a cool, dry place to avoid moisture.
-
Wear gloves and a mask when sanding, cutting, or handling printed parts.
-
Keep away from open flames — most filaments are flammable.
PLA
- Safe and low-odor filament, but still print with good ventilation.
- Avoid overheating to prevent smoke or odor.
- Allow the print to cool down before removing from the bed.
Safety Data Sheet
Anycubic PLA Marble Filament
