Description
Anycubic PETG Refilament is a mid-range industrial material that combines the high impact strength and temperature resistance of ABS with the printing ease of PLA. This Refill version is specifically intended for users who already own an Anycubic Reusable Spool.
It is an ideal choice for functional prototypes, mechanical parts, and outdoor models thanks to its natural UV resistance and moisture-repellent properties. When paired with the Anycubic ACE Pro / ACE 2 Pro, it supports Intelligent Identification (via an included RFID chip) to automatically sync settings and track material levels.
Features
Durable & Impact-resist
PETG combines the PLA's ease of printing with the toughness of ABS. Models maintain structural integrity even when dropped or under stress. Making it an excellent choice for toys, chassis, and mechanical prototypes.
Water-resist & Weather-resist
The PETG filaments offer excellent water/weather resistance for all outdoor applications. Preserving the model's original luster and texture over time.
Chemical-resist
The PETG filaments resist chemical corrosion from gasoline, soap, detergent, perfume, toothpaste, and dozens of other chemical substances.
Boosting Efficiency with Intelligent ldentification
The filaments feature intelligent identification chips that integrate seamlessly with the ACE Pro, allowing for automatic identification of printing information and enhancing the printing experience.
Printing Guide
You must dry PETG Translucent filaments before printing and store them in a moisture-controlled environment to prevent air bubbles during printing.
Applicable Printer
It is widely compatible with all FDM 3D printers on the market.
Specifications
Dry Out Before Use: Required
Drying Condition: 55-65 °C, 6-8 h
ACE Compatibility: Compatible
Nozzle Size: Recommended 0.2 mm or above
Printing Temperature: 230-250 ℃
Heated Bed Temperature: 60-70 ℃
Recommended Printing Speed: 50-250 mm/s
Maximum Volume Speed (Flow Rate): 12 mm³/s
Density: 1.23 g/cm³
Melt Index: 25±3 g/10 min (250℃/2.16kg)
Melting Point Temperature: 130 ℃
Vicat Softening Temperature: 72 ℃
Heat Deflection Temperature (0.45MPa): 69 ℃
Young's Modulus: 1850±100 Mpa
Tensile Strength: 52±1 Mpa
Elongation at Break: 13±1%
Bending Modulus: 2000±50 Mpa
Bending Strength: 80±2 MPa
lzod lmpact Strength (X-Y): 45±2 kJ/m²
Tensile Strength (Z): 31±3 MPa
Filament Type: General filaments
Recommend to Print: Toys, decorative parts, and fandom
Intelligent Identification: Supported
Safety Precautions
-
Always print in a well-ventilated area.
-
Avoid breathing the fumes while printing.
-
Do not touch the nozzle, heated bed, or printed object right after printing — let it cool down first before handling.
-
Keep the printer and filament away from children and pets.
-
Unplug the printer when not in use.
-
Store the filament in a cool, dry place to avoid moisture.
-
Wear gloves and a mask when sanding, cutting, or handling printed parts.
-
Keep away from open flames — most filaments are flammable.
PETG
- Low odor but still print with airflow or ventilation.
- Allow the printed part to cool down before removing or handling.
Safety Data Sheet
Anycubic PETG Filament
