Description:
Bambu PLA-CF is a biocomposite material consisting of PLA reinforced with carbon fibers. This addition significantly improves the mechanical strength and stiffness of the printed parts compared to standard PLA. One of its most appreciated features is the matte, charcoal-like finish. The carbon fibers help to almost entirely hide layer lines, giving parts a professional, "machined" look. Because it is a "Refilament," it is a more cost-effective and eco-friendly way to keep your AMS (Automatic Material System) stocked without accumulating empty plastic spools.
Features:
-
Carbon Fiber Texture & Minimized Layer Lines
-
Improved Mechanical Properties
-
Stabilized Printing Dimension
-
Comes with Basic Reusable Spool
-
Diameter: 1.75mm +/- 0.03mm
Cautions for Use
-
0.2mm Nozzle NOT Compatible
-
Stainless Steel Nozzle NOT Recommended
-
All AMS Series Compatible
-
Dry before Use for the Highest Print Quality
Specifications:
Material: PLA Carbon Fiber
Diameter: 1.75 mm (±0.03 mm)
Surface Finish: Matte / Carbon Texture
Printing Temp: 210°C – 240°C
Bed Temp: 35°C – 45°C
Printing Speed: Up to 200 mm/s
Bending Modulus: ~3950 MPa (Higher than standard PLA)
Nozzle Requirement: Hardened Steel (0.4 mm or larger)
Safety Precautions:
-
Always print in a well-ventilated area.
-
Avoid breathing the fumes while printing.
-
Do not touch the nozzle, heated bed, or printed object right after printing — let it cool down first before handling.
-
Keep the printer and filament away from children and pets.
-
Unplug the printer when not in use.
-
Store the filament in a cool, dry place to avoid moisture.
-
Wear gloves and a mask when sanding, cutting, or handling printed parts.
-
Keep away from open flames — most filaments are flammable.
PLA
- Safe and low-odor filament, but still print with good ventilation.
- Avoid overheating to prevent smoke or odor.
- Allow the print to cool down before removing from the bed.
All CF (Carbon Fiber) Filaments
- (PLA CF, PETG CF, ABS CF, ASA CF, Nylon CF, etc.)
- Printing may produce fine dust — use good ventilation.
- Always wear gloves and a mask when handling or sanding printed parts.
- Carbon fiber dust can irritate the skin, eyes, and lungs.
- Let prints cool completely before touching.
- Use a hardened steel nozzle to prevent nozzle wear.
Safety Data Sheet
Bambu Lab Refilament PLA-CF Filament
