Description
The Bambu Lab X2D redefines the desktop gantry with its Hybrid Dual-Extrusion system. Unlike standard dual-head printers that add significant weight to the toolhead, the X2D uses a primary Servo-driven Direct Drive nozzle for high-detail printing and a secondary Auxiliary Bowden nozzle for supports and secondary materials.
This configuration allows for zero-waste support removal and instant color switching without the purge times typical of single-nozzle systems. With a 65°C actively heated chamber, it is built to handle industrial materials like PC, Nylon, and Carbon Fiber composites with zero warping.
Why Choose Bambu Lab X2D?
Dual nozzle - Multi-material made simple.
Servo Extruder - Smooth surfsces at full speed.
Dual-intake cooling - Crisp details.
Active heating - Stronger parts.
Adaptive Calibration - Lasting precision.
AI Monitoring - Your built-in backup.
Certified Emissions - Designed for your home.
Features
Stop overthinking with support - start peeling it off clean.
The main nozzle prints the part. The auxiliary nozzle handles the support¹. X2D hands all the messy support work to a helper nozzle with its own material. Wrap steep overhangs, fabric folds, and internal channels with full support, then peel it away clean.
Tough and soft. In one print
Fuse PLA and TPU in a single model. Create bags, grips, and bumpers that come off the bed ready to use.
Swap colors instantly
Dual nozzles swap in a split second. Enjoy faster color changes, cleaner transitions, and far less waste.
Tap. Switch. Done. Unlike traditional motor-driven systems, X2D packs a Gear-and-Trigger mechanism into the toolhead. The nozzle-change lever taps the trigger arm, driving an internal gear train to change the nozzle. No extra weight. Just a clean swap.
Cool it. Before gravity makes it droop.
Two intakes are always better than one. Freshly extruded filament is soft, but the X2D instantly flushes the chamber with cool air from dual left and right intakes. This constant air exchange stabilizes each layer for low-temperature filaments like PLA, cooling every line at exactly the right moment. So even on tricky angles, overhangs stay sharp and bridges stay clean.
Hot Enough Isn't Enough. Heat It Even.
The X2D pairs a 300 °C nozzle with a 65 °C actively heated chamber - hot enough for the majority of engineering filaments like ABS, ASA, and nylon. But temperature alone isn't the point - the active chamber distributes heat evenly, so layers bond strongly from edge to edge. Your large engineering prints come out strong and flat.
Calibration adapts to wear and material changes.
Most printers calibrate flow with a single K factor and use it in all scenarios. Bambu Lab doesn't. Flow Dynamics Calibration³ builds a time-varying, nonlinear model of your entire extrusion system. So whether there's minor residue inside the nozzle, gradual nozzle wear, or slightly damp filament, the system detects, calibrates, and compensates. Smooth surfaces and sharp edges stop being luck. They repeat.
PMSM Servo System: Smoother surfaces start inside the extruder.
Extruder gears grind into filament as they feed it, causing small pressure fluctuations that show up as tiny lines on the surface. Exclusive to Bambu Lab, the PMSM servo system⁵ counters this in real time. With resistance and position sampling at 20 kHz, it adjusts electromagnetic torque on the fly, smoothing out every micro-fluctuation before it reaches the surface.
Smooth surface quality.
Extrusion pressure stays precisely controlled, so flow stays stable and surface finish remains clean and uniform, print after print.
Compensation makes corners sharp and details clean.
Ringing and ghosting blur edges at high speed. Active Vibration Compensation cancels them in real time - so edges print crisp, no matter how fast.
AI Camera keeps an eye on your prints.
Before printing, the AI Liveview Camera and Toolhead Camera scan the build plate for debris and verify plate placement. During printing, they watch for spaghetti, nozzle clumping, and purge-chute jams in real time - pausing the job before it wastes hours of time and filament.
Fully-equipped sensors cover every critical stage.
31 sensors span the entire system - monitoring the feeding path, printing process, thermal environment, and machine safety in real time. Every variable that affects your print is measured, checked, and acted on.
Specifications
Printing Technology: Fused Deposition Modeling
Build Volume (W*D*H):
Main Nozzle Printing: 256*256*260 mm³
Auxiliary Nozzle Printing: 235.5*256*256 mm³
Dual Nozzle Printing: 235.5*256*256 mm³
Total Volume for Two Nozzles: 256*256*260 mm³
Chassis: Plastic and Steel
Outer Frame: Plastic, Glass, and Metal
Physical Dimensions: 392*406*478 mm³
Net Weight: 16.25 kg
Main Extruder Gear: Hardened Steel
Main Extruder Motor: Bambu Lab High-precision Permanent Magnet Synchronous Motor
Auxiliary Extruder Gear: Hardened Steel
Auxiliary Extruder Motor: Stepper Motor
Nozzle: Hardened Steel
Max Nozzle Temperature: 300 °C
Included Nozzle Diameter: 0.4 mm
Supported Nozzle Diameter: 0.2 mm, 0.4 mm, 0.6 mm, 0.8 mm
Filament Cutter: Built-in
Filament Diameter: 1.75 mm
Supported Build Plate Type: Textured PEI Plate, Smooth PEI Plate, Cool Plate SuperTack, Engineering Plate
Max Heatbed Temperature: 120 ℃
Max Speed of Toolhead: 1000 mm/s
Max Acceleration of Toolhead: 20,000 mm/s²
Active Chamber Heating: Supported
Max Temperature: 65 °C
Pre-filter Grade: G3
HEPA Filter Grade: H12
Activated Carbon Filter Type: Granulated Coconut Shell
What's In The Box
| |
X2D |
X2D AMS COMBO |
|
X2D
|
✔
|
✔
|
|
Textured PEI Build Plate
|
✔
|
✔
|
|
External Exhaust Fan Bundle
|
✔
|
✔
|
|
Accessory Box
|
✔
|
✔
|
|
Spool holder
|
✔
|
✔
|
|
AMS 2 Pro (combo version)
|
- |
✔
|
