{"product_id":"sunlu-e2-filadryer-220v-eu-plug","title":"Sunlu E2 FilaDryer 220V EU Plug","description":"\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0531\/3419\/6927\/files\/Screenshot_2025-10-15_152921.png?v=1760513388\"\u003e\u003c\/p\u003e\n\u003ch2\u003e\n\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003eThe SUNLU FilaDryer E2 is a powerful 2-in-1 device that functions as both a high-efficiency filament dryer and an annealing chamber for 3D-printed parts. With a 500W PTC heater, it can reach temperatures up to 110∘C, which is significantly higher than most consumer dryers. This ultra-high temperature capability ensures optimal moisture removal for hygroscopic engineering materials, improving print quality and layer adhesion. It can also be used for annealing finished prints to enhance their strength, durability, and impact resistance. The large, dual-chamber design offers ample space and features superior insulation and an airtight seal to maintain consistent, low-humidity conditions.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e\n\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSUNLU FilaDryer E2: \u003c\/strong\u003eThe newest pop-up in 2025, made for engineered materials, helps infinite creation, drying and annealing in one.\u003cbr\u003e\u003cstrong\u003eSuperior and Efficient Annealing:\u003c\/strong\u003e Up to 110°C, it can anneal 99.99% of engineering materials on the market, allowing the materials to fulfill their potential and giving your model excellent properties such as extraordinary impact resistance and toughness. Suitable for such as ABS, ABS-CF, ASA, PC, flame retardant PC, PC-ABS, PC-PBT, CoPA, PA6-GF, PA6-CF, PA12-CF, PA612-CF, PA12 etc...\u003cbr\u003e\u003cstrong\u003eFast and Efficient Drying: \u003c\/strong\u003e500W PTC ultra-high heating power makes your creation a step faster. It takes only 20 minutes to heat up to 50℃ at room temperature and 30 minutes to heat up to 70℃! Temperature can reach up to 110℃ (high temperature drying needs to take into account the temperature resistance of the filament spool)\u003cbr\u003e\u003cstrong\u003eExcellent Airtightness, Super Insulation Effect: \u003c\/strong\u003eOne-piece silicone plug over the line hole, the cover plate is equipped with sealing silicone strips, to isolate the outside water vapor into the chamber. The all-round dual-chamber design at the top, middle and bottom realizes the heating temperature exceeding 100°C. Combined with the innovative closure system, the annealing process is more perfect, solving the two needs of annealing and drying in one machine.\u003cbr\u003e\u003cstrong\u003eExtra Large Interior Space, Super Adaptability:\u003c\/strong\u003e The maximum compatible spool size is Φ250mm*153mm, which is suitable for most of the regular spools on the market. Tested, it can hold 2 reels of regular 1KG spools, 2 reels of regular 2KG spools or 1 reel of regular 3KG spools. (Note that the test spools are SUNLU spools, other brands of spools will have slight differences, but basically compatible, when using the need to pay attention to the size of the spool.)\u003cbr\u003e\u003cstrong\u003eStrong Compatibility, Adapts to 99% of the use scenarios: \u003c\/strong\u003eCan be applied to both engineering materials and conventional materials. Built-in preset filament settings, one click to apply the preset. The wire diameter is compatible with most of the materials on the market (Φ1.75mm, Φ2.85mm), and the Teflon tubing included with the product is Φ4*Φ3mm in size and 8cm*2 and 1m*2 in length.\u003cbr\u003e\u003cstrong\u003eStrong Safety, No More Worries: \u003c\/strong\u003eIntelligent protection system, two-level temperature control switch, over-temperature will be disconnected, cooling will be restored. Double-layer heat insulation, when the internal temperature is \u0026gt;100℃, the external touch temperature is only \u0026lt;60℃. Fireproof material grade\u003cbr\u003e\u003cstrong\u003eInspire Engineering Material Potential:\u003c\/strong\u003e Annealing significantly enhances the impact resistance and durability of engineering materials, allowing you to unlock engineering-grade performance in every creation, which can be applied to: drone accessories, helmets, screws and nuts, blower pipes, etc. Models that need to withstand high-intensity impact and durability.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e\n\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Name \/ Model:\u003c\/strong\u003e Filament Dryer E2\u003cbr\u003e\u003cstrong\u003eProduct Dimensions: \u003c\/strong\u003e400mm×220mm×307mm(LWH)\u003cbr\u003e\u003cstrong\u003eOperating Environment: Temperature: \u003c\/strong\u003e10℃-35℃ \u003cbr\u003e\u003cstrong\u003eRelative Humidity: \u003c\/strong\u003e≤95%\u003cbr\u003e\u003cstrong\u003eWorking Temperature Range: \u003c\/strong\u003e35℃-110℃\u003cbr\u003e\u003cstrong\u003eHumidity Display Range:\u003c\/strong\u003e 10%-90% (Accuracy±10%) \u003cbr\u003e\u003cstrong\u003eNote 1:\u003c\/strong\u003e When working temperature≥80℃, humidity sensor will start protection mode (displays\u0026lt;10%humidity) \u003cbr\u003e\u003cstrong\u003eNote 2:\u003c\/strong\u003e After temperature drops to 70℃, humidity sensor recovers original accuracy after about 20 hours.\u003cbr\u003e\u003cstrong\u003eTimer Range:\u003c\/strong\u003e 0-99 Hour\u003cbr\u003e\u003cstrong\u003ePower Input: \u003c\/strong\u003e(Please verify local voltage compatibility) Please select the voltage based on the silk-screen marking on the side of the product\u003cbr\u003e\u003cstrong\u003eMaximum Operating Current:\u003c\/strong\u003e 2.2A @230V 4.2A@120V\u003cbr\u003e\u003cstrong\u003eStandby Power: \u003c\/strong\u003e≤1W\u003cbr\u003e\u003cstrong\u003eCompatible Filament Diameters: \u003c\/strong\u003eΦ1.75mm\/Φ2.85mm\/Φ3.0mm\u003c\/p\u003e","brand":"Makerlab Electronics","offers":[{"title":"Default Title","offer_id":44621447823551,"sku":"MLE08382","price":19999.0,"currency_code":"PHP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0531\/3419\/6927\/files\/FilaDryerE2_3_42b3fa3e-df18-4a4b-9e02-144c2ccfceb9.jpg?v=1760513265","url":"https:\/\/makerlab.ph\/products\/sunlu-e2-filadryer-220v-eu-plug","provider":"Makerlab PH","version":"1.0","type":"link"}