{"title":"Shields compatible with Arduino®","description":"","products":[{"product_id":"gsm-shield-sim900","title":"GSM Shield Sim900","description":"\u003ch1\u003e\u003cstrong\u003eGSM Shield Sim900\u003c\/strong\u003e\u003c\/h1\u003e\n\u003cp\u003eThis GSM Shield Sim900 provides you a way to use the GSM cell phone network to receive data from a remote location, it delivers GSM\/GPRS 850\/900\/1800\/1900MHz signals for Audio, SMS and GPRS Service.\u003c\/p\u003e\n\u003cp\u003eThis GPRS\/GSM shield is configured and controlled via its UART using AT commands. Learn the basic usage of this Shied in \u003ca href=\"http:\/\/www.instructables.com\/id\/Control-the-relays-via-GPRS-SMS\/#step1\"\u003eInstructables\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eIf your project requires the use of both GSM and GPS, we suggest taking a look at our \u003ca href=\"http:\/\/makerlab-electronics.com\/product\/gsm-shield-sim808\/\"\u003eGSM Shield with SIM808\u003c\/a\u003e Module.\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe GPRS Shield provides you a way to communicate using the GSM cell phone network.\u003c\/li\u003e\n\u003cli\u003eThe GPRS Shield is based on SIM900 module from SIMCOM and compatible with Arduino and its clones.\u003c\/li\u003e\n\u003cli\u003eThe shield also has the 12 GPIOs, 2 PWMs and an ADC of the SIM900 module(They are all 2V8 logic) present on board.\u003c\/li\u003e\n\u003cli\u003eThe shield allows you to achieve SMS, MMS, GPRS and Audio via UART by sending AT commands (GSM 07.07 ,07.05 and SIMCOM enhanced AT Commands).\u003c\/li\u003e\n\u003cli\u003eThis module power supply for: 5V~26V, if more than 5V power supply must be in 2A, recommend a 9V power supply. Plug in the Arduino motherboard, power supply must be able to provide 2A current.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv id=\"productDescriptionHeading\"\u003e\n\u003ch3\u003eSpecification\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003eColor: Blue\u003c\/li\u003e\n\u003cli\u003eBoard Size: 85 x 55 x 15 mm(approx)\u003c\/li\u003e\n\u003cli\u003eGPRS multi-slot class 10\/8 GPRS mobile station class B Compliant to GSM phase 2\/2+ Class 4 (2 W @ 850 \/ 900 MHz) Class 1 (1 W @ 1800 \/ 1900MHz)\u003c\/li\u003e\n\u003cli\u003eEnhanced Commands: SIMCOM AT Commands.\u003c\/li\u003e\n\u003cli\u003eLow power consumption: 1.5 mA(sleep mode)\u003c\/li\u003e\n\u003cli\u003eIndustrial Temperature Range: 40 \u003cimg src=\"http:\/\/www.ultest.com\/image\/catalog\/\/SIM900-GPRS-GSM-STM32-WIFI-DTMf--Shield-Development-Board-Quad-Band-Mod\/SIM900-GPRS-GSM-STM32-WIFI-DTMf--Shield-Development-Board-Quad-Band-Module-For-A-descriptionImage9.jpg\" alt=\"SIM900-GPRS-GSM-STM32-WIFI-DTMf--Shield-Development-Board-Quad-Band-Module-For-A\"\u003e~+85 \u003cimg src=\"http:\/\/www.ultest.com\/image\/catalog\/\/SIM900-GPRS-GSM-STM32-WIFI-DTMf--Shield-Development-Board-Quad-Band-Mod\/SIM900-GPRS-GSM-STM32-WIFI-DTMf--Shield-Development-Board-Quad-Band-Module-For-A-descriptionImage9.jpg\" alt=\"SIM900-GPRS-GSM-STM32-WIFI-DTMf--Shield-Development-Board-Quad-Band-Module-For-A\"\u003e\n\u003c\/li\u003e\n\u003cli\u003ePower supply: 5 V~26 V(Recommend 9V power supply)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv id=\"productDescriptionHeading\"\u003e\n\u003ch3\u003ePackage list\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003eGSM Shield x 1\u003c\/li\u003e\n\u003cli\u003eAntenna x 1\u003c\/li\u003e\n\u003cli\u003ePCB Antenna x 1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv id=\"productDescriptionHeading\"\u003e\n\u003ch3\u003eWiki \u0026amp; External links\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003eDetailed Usage In \u003ca href=\"http:\/\/www.elecrow.com\/wiki\/index.php?title=GPRS\/GSM_Shield_v1.0\"\u003eWiki\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/www.elecrow.com\/download\/SIM900_AT_Command_Manual_V1.03.pdf\"\u003eSIM900_AT_Command_Manual_V1.03\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/www.elecrow.com\/download\/SIM900datasheeet.zip\"\u003eSIM900datasheeet\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/www.elecrow.com\/download\/SIM900_firmware_and_tool.zip\"\u003eSIM900_firmware_and_tool\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Others","offers":[{"title":"Default Title","offer_id":42290935201983,"sku":"MLE00605","price":1600.0,"currency_code":"PHP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0531\/3419\/6927\/files\/36b18f49425ce4f0acda85e9b0ccee01.jpg?v=1735816394"},{"product_id":"proto-shield","title":"Protoshield compatible with Uno R3","description":"\u003ch1\u003eProtoshield compatible with Uno R3\u003c\/h1\u003e\n\u003cp\u003eThe Proto Shield is similar to a proto board but can be mounted on top of an Arduino Uno or Mega. It has solder holes allowing user to develop small circuit to connect to the Arduino board, the shield also includes a small breadboard for easy wiring.\u003c\/p\u003e","brand":"Others","offers":[{"title":"Default Title","offer_id":42290957648063,"sku":"MLE00053","price":100.0,"currency_code":"PHP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0531\/3419\/6927\/files\/ce376400d005cedec7eedff4372af8fa.jpg?v=1735816322"},{"product_id":"proto-screw-terminal-shield","title":"Proto Screw Shield","description":"\u003ch1\u003eProto Screw Shield\u003c\/h1\u003e\n\u003cp\u003eThe Proto-Screw Shield extends all pins of the Arduino out to 3.5mm pitch screw terminals. It also has a lot of the utility provided by \u003ca href=\"http:\/\/www.sparkfun.com\/commerce\/product_info.php?products_id=7914\"\u003eArduino Protoshield\u003c\/a\u003e, including a large prototyping space of  unconnected 0.1\" spaced through-holes, a reset button, and an LED.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eArduino R3 Pinout\u003c\/li\u003e\n\u003cli\u003e3.5mm Pitch Screw Terminals\u003c\/li\u003e\n\u003cli\u003eReset Button\u003c\/li\u003e\n\u003cli\u003eBuilt-in LED\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Others","offers":[{"title":"Default Title","offer_id":42290967314623,"sku":"MLE00056","price":180.0,"currency_code":"PHP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0531\/3419\/6927\/files\/7605307c3045d76911a784146a81401c.jpg?v=1735816259"},{"product_id":"arduino-cnc-shield-v3","title":"CNC Shield V3 for Arduino®","description":"\u003ch1\u003eCNC Shield V3 for Arduino®\u003c\/h1\u003e\n\u003cp\u003eThe CNC Shield V3 for Arduino®, is an Arduino compatible board that turns your Arduino into a CNC controller. Using an opensource firmware it can control up to 4 \u003ca href=\"https:\/\/www.makerlab-electronics.com\/product\/stepper-motor-nema-17-4500gcm\/\"\u003eStepper motor\u003c\/a\u003e using \u003ca href=\"https:\/\/www.makerlab-electronics.com\/product\/stepper-motor-driver-drv8825\/\"\u003eDRV8825 or A4988\u003c\/a\u003e stepper motor driver making it easy to get your CNC projects up and running in a few hours.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGRBL 0.8c compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals \u003ca href=\"https:\/\/github.com\/grbl\/grbl\"\u003ehttps:\/\/github.com\/grbl\/grbl\u003c\/a\u003e)\u003c\/li\u003e\n\u003cli\u003e4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13)\u003c\/li\u003e\n\u003cli\u003e2 x End stops for each axis (6 in total)\u003c\/li\u003e\n\u003cli\u003eSpindle enable and direction\u003c\/li\u003e\n\u003cli\u003eCoolant enable\u003c\/li\u003e\n\u003cli\u003eUses removable Pololu A4988 compatible stepper drivers. (A4988, DRV8825 and others)\u003c\/li\u003e\n\u003cli\u003eJumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1\/32 micro-stepping )\u003c\/li\u003e\n\u003cli\u003eCompact design.\u003c\/li\u003e\n\u003cli\u003eStepper Motors can be connected with 4 pin molex connectors.\u003c\/li\u003e\n\u003cli\u003eRuns on 12-36V DC. (At the moment only the Pololu DRV8825 drivers can handle up to 36V so please consider the operation voltage when powering the board.)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Arduino","offers":[{"title":"Default Title","offer_id":42290969673919,"sku":"MLE00423","price":150.0,"currency_code":"PHP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0531\/3419\/6927\/files\/sg-11134201-7renx-m2972rspbgie5a.jpg?v=1735816213"},{"product_id":"dtmf-shield","title":"DFRobot DTMF Shield | DFR0308","description":"\u003ch2\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDTMF Shield\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis DTMF Shield is a Dual-tone multi-frequency signaling module decoder for Arduino With it's audio connector you can decode the crazy funny noises common phones make. If you are not sure what I'm talking about, imagine a home phone while pressing several of its keys. These Touch-Tones have a specific frequency or sound that this module can decode. This Shield is a Audio code system that will allow you to send commands to your Arduino via Audio signal.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eTogether with GMS \/ GPRS \/ GPS shield this module can communicate your Arduino with any phone land line or Cell phone in the world, within GSM signal range. Which goes as far as your cellphone.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eIts quite convenient to send wireless commands over audio lines, like a phone call. Connected to our GSM\/GPS shield, you could just call your robot and press any button or set of buttons to enable it.\u003cbr\u003eConnect DFRobot mp3 module to this board to enable audio feedback when pressing keys, or a welcome message when the phone call is established. Enable GPS geo location mapping, and DTMF moving functions to have a GSM wireless networking remote controlled robot.\u003cbr\u003eNote: For use with the GSM \/ GPS \/ GPRS shield, you will need an \u003ca href=\"https:\/\/www.dfrobot.com\/product-417.html\"\u003eaudio cable\u003c\/a\u003e (FIT0113)\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAudio socket for application\u003c\/li\u003e\n\u003cli\u003e37x37x9mm?1.46x1.46x0.35\"?\u003c\/li\u003e\n\u003cli\u003eSpeaker connector for audio sound checking.\u003c\/li\u003e\n\u003cli\u003eMicrophone connector for over the air remote control system (note: due to environmental noise, without any filtering system this method is not recommended)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eDocuments:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/DFRobot\/DTMF\/archive\/master.zip\" rel=\"nofollow\"\u003elibrary and example\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.dfrobot.com\/wiki\/index.php\/DTMF\"\u003eWiki page\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003ePart List:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eDTMF module x1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"DFRobot","offers":[{"title":"Default Title","offer_id":42290982060223,"sku":"MLE00060","price":950.0,"currency_code":"PHP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0531\/3419\/6927\/files\/MLE00060.jpg?v=1748847766"},{"product_id":"smartmatrix-smartled-shield-v4-for-teensy-3","title":"Adafruit SmartMatrix SmartLED Shield V4 for Teensy 3 | Code: 1902","description":"\u003ch1\u003e\u003cstrong\u003eSmartMatrix SmartLED Shield V4 for Teensy 3\u003c\/strong\u003e\u003c\/h1\u003e\n\u003cp dir=\"auto\"\u003eThe SmartLED Shield gives you an easy way to connect up a \u003ca href=\"https:\/\/www.makerlab-electronics.com\/product\/teensy-3-2\/\" target=\"_blank\" rel=\"noopener\" data-saferedirecturl=\"https:\/\/www.google.com\/url?hl=en\u0026amp;q=https:\/\/www.adafruit.com\/product\/2756\u0026amp;source=gmail\u0026amp;ust=1510160868454000\u0026amp;usg=AFQjCNHKBDQqpUyXMmXtps4zXVjfeuQp6A\"\u003eTeensy 3.2\u003c\/a\u003e, \u003ca href=\"https:\/\/www.makerlab-electronics.com\/product\/teensy-3-5-development-board\/\" target=\"_blank\" rel=\"noopener\" data-saferedirecturl=\"https:\/\/www.google.com\/url?hl=en\u0026amp;q=https:\/\/www.adafruit.com\/product\/3267\u0026amp;source=gmail\u0026amp;ust=1510160868454000\u0026amp;usg=AFQjCNHs9d0dDZbSVI86LPfczMwgNRuCgQ\"\u003eTeensy 3.5\u003c\/a\u003e, or \u003ca href=\"https:\/\/www.makerlab-electronics.com\/product\/teensy-3-6\/\" target=\"_blank\" rel=\"noopener\" data-saferedirecturl=\"https:\/\/www.google.com\/url?hl=en\u0026amp;q=https:\/\/www.adafruit.com\/product\/3266\u0026amp;source=gmail\u0026amp;ust=1510160868454000\u0026amp;usg=AFQjCNF0BT_82FSH_cKUh2vNWvtNCocqhw\"\u003eTeensy 3.6\u003c\/a\u003e to one of our RGB LED Matrix Panels. The example sketches included with the SmartMatrix Library will get you started quickly displaying graphics, patterns, or even animated GIFs from a microSD card on your panel.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003eFeatures\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eShield is fully assembled, no soldering required (besides adding pins to the Teensy)\u003c\/li\u003e\n\u003cli\u003eHUB75 pinout, connects to panel directly or using panel's ribbon cable\u003c\/li\u003e\n\u003cli\u003e5V level shifters for better compatibility with 5V panels\u003c\/li\u003e\n\u003cli\u003eSupport for driving Dotstar\/APA102 LEDs in parallel with the LED panel, connects directly to 4-pin JST SM cable on Dotstar LEDs, or use the included cable\u003c\/li\u003e\n\u003cli\u003eExpansion rows for main Teensy pins, making signals available for prototyping\u003c\/li\u003e\n\u003cli\u003eTeensy is easily removed from the shield\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"auto\"\u003eNote: compared to previous versions of the SmartMatrix Shield, the microSD card slot was removed, as it is redundant when combined with the Teensy 3.5\/3.6\u003c\/p\u003e\n\u003cp\u003eThe shield brings the 13 I\/O signals needed to drive the panel out to a connector that matches the pinout on the panel, and brings the rest of the I\/O signals out to convenient expansion headers.  The board includes pre-soldered 5V level shifters.\u003c\/p\u003e\n\u003cp\u003eIt's a great board for easily expanding your Teensy's capabilities.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions: 52mm x 49mm x 6mm \/ 2\" x 1.9\" x 0.23\"\u003c\/li\u003e\n\u003cli\u003eLength with attached cable: 138 mm\u003c\/li\u003e\n\u003cli\u003eHeight w\/ Components: 15mm \/ 0.6\"\u003c\/li\u003e\n\u003cli\u003eWeight: 12g (only board), 22g (board w\/header and cable)\u003c\/li\u003e\n\u003cli style=\"list-style-type: none\"\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eFull Kit Contents\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSmartLED Shield V4\u003c\/li\u003e\n\u003cli\u003eMale 4-pin JST SM Cable (10cm)\u003c\/li\u003e\n\u003cli\u003e2x8 Extra Long Pin Header\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":42291008700607,"sku":"MLE00062","price":1500.0,"currency_code":"PHP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0531\/3419\/6927\/files\/606f0f51802a50fa2265c60c02004a4b.jpg?v=1735815860"},{"product_id":"arduino-compatible-sensor-shield-v4-0","title":"Sensor Shield V4.0 compatible with Arduino®","description":"\u003ch1\u003eSensor Shield V4.0 compatible with Arduino®\u003c\/h1\u003e\n\u003cp\u003eThis Sensor Shield is compatible with most types of Arduino boards that support the standard header layout including Uno, Leonardo, and Mega. It provides a convenient way to connect various sensor modules, servo's, or I2C LCD displays without the need for soldering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e6 x Buckled 3 pin analogue connectors providing connections to Analogue pins A0 to A5, GND and 5V\u003c\/li\u003e\n\u003cli\u003e1x Buckled 4 pin serial I2C \/ UART interface (selectable via on board jumpers) providing convenient connection to serial or I2C sensors or displays.\u003c\/li\u003e\n\u003cli\u003e12x Servo headers proving access to digital pins 0 to 13 with VCC and GND power connections.\u003c\/li\u003e\n\u003cli\u003e6x Aux headers providing access to analogue pins A0 to A5\u003c\/li\u003e\n\u003cli\u003eSerial I2C \/ UART jumper selection\u003c\/li\u003e\n\u003cli\u003eReset button\u003c\/li\u003e\n\u003cli\u003eStandard Arduino headers for adding additional shields.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e I2C interface compatible with Uno only. When connecting multiple servos please check power requirements of each servo.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Arduino","offers":[{"title":"Default Title","offer_id":42291013812415,"sku":"MLE00057","price":200.0,"currency_code":"PHP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0531\/3419\/6927\/files\/MLE00057.jpg?v=1778142993"},{"product_id":"cnc-shield-for-arduino-mega-2560-ramps-1-4","title":"CNC Stepper Motor Driver Shield Ramps 1.4","description":"\u003ch1 id=\"firstHeading\" class=\"firstHeading\"\u003e\u003cspan dir=\"auto\"\u003eCNC Stepper Motor Driver Shield Ramps 1.4\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp\u003eCNC Stepper Motor Driver Shield Ramps 1.4 is a stepper motor driver adapter in the form factor of an Arduino shield particularly for Mega 2560 compatible boards, it is designed for the purpose of using pololu stepper driven board A4988 or \u003ca href=\"https:\/\/www.makerlab-electronics.com\/product\/stepper-motor-driver-drv8825\/\"\u003eDRV8825\u003c\/a\u003e. Ramps can only work when it is connected to a Arduino Mega 2560 and stepper driver such as A4988 or \u003ca href=\"https:\/\/www.makerlab-electronics.com\/product\/stepper-motor-driver-drv8825\/\"\u003eDRV8825\u003c\/a\u003e. Owning to its stability in operation and great compatibility with most 3Dprinter (all reprap-model such as pursa i2 and i3). The combination of Ramps1.4 MEGA 2560 A4988 DRV8825 is becoming a mainstream of DIY 3D printer control board.\u003c\/p\u003e\n\u003ch3\u003e\u003cspan id=\"Features\" class=\"mw-headline\"\u003eFeatures\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStandard interfaces (as that of extruder)\u003c\/li\u003e\n\u003cli\u003eReserved GCI like I2C and RS232\u003c\/li\u003e\n\u003cli\u003eMOSFET 3 MOSFET are applied to the heater\/ fan and thermistor circuit.\u003c\/li\u003e\n\u003cli\u003eAdding another 5A to protect the component parts.\u003c\/li\u003e\n\u003cli\u003eAn 11A fuse is added to the hotbed\u003c\/li\u003e\n\u003cli\u003eSupport 5 stepper drive board\u003c\/li\u003e\n\u003cli\u003eThe adoption of Pin Header makes it more convenient to repair or change.\u003c\/li\u003e\n\u003cli\u003eI2C and SPI are reserved for expanding\u003c\/li\u003e\n\u003cli\u003eAll the MOSFET can be controlled by PWM\u003c\/li\u003e\n\u003cli\u003eAdding a SD module for SD ramps module.\u003c\/li\u003e\n\u003cli\u003eLED can indicate the status of the heater (the open and close of MOS).\u003c\/li\u003e\n\u003cli\u003e2 stepper motor for Z axis in parallel.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Others","offers":[{"title":"Default Title","offer_id":42292817887423,"sku":"MLE00424","price":300.0,"currency_code":"PHP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0531\/3419\/6927\/files\/fc20bc969fcc9a1ddc0cef3059914b58.jpg?v=1735815363"},{"product_id":"arduino-ethernet-shield-w5100","title":"Ethernet Shield W5100 for Arduino®","description":"\u003ch1\u003eEthernet Shield W5100 for Arduino®\u003c\/h1\u003e\n\u003cp\u003eThe Ethernet Shield - W5100 allows your \u003ca href=\"https:\/\/www.makerlab-electronics.com\/product\/arduino-uno-r3\/\"\u003eArduino\u003c\/a\u003e to connect to the internet via LAN Cable. The shield is based on the Wiznet W5100 ethernet chip providing a network (IP) stack capable of both TCP and UDP. The Arduino Ethernet Shield supports up to four simultaneous socket connections.\u003c\/p\u003e\n\u003cp\u003eThe on-board micro-SD card slot can be used to store files for serving over the network. It is compatible with the \u003ca href=\"https:\/\/www.makerlab-electronics.com\/product\/arduino-uno-r3-italy\/\"\u003eArduino Uno\u003c\/a\u003e and \u003ca href=\"https:\/\/www.makerlab-electronics.com\/product\/arduino-mega-2560-r3-italy\/\"\u003eMega\u003c\/a\u003e. You can access the on-board SD card slot using the SD library which is included in the current Arduino build.\u003c\/p\u003e\n\u003cp\u003eArduino communicates with both the W5100 and SD card using the SPI bus (through the ICSP header). This is on digital pins 11, 12, and 13 on the Uno and pins 50, 51, and 52 on the Mega. On both boards, pin 10 is used to select the W5100 and pin 4 for the SD card. These pins cannot be used for general i\/o. On the Mega, the hardware SS pin, 53, is not used to select either the W5100 or the SD card, but it must be kept as an output or the SPI interface won't work.\u003c\/p\u003e\n\u003cp\u003eNote that because the W5100 and SD card share the SPI bus, only one can be active at a time. If you are using both peripherals in your program, this should be taken care of by the corresponding libraries. If you're not using one of the peripherals in your program, however, you'll need to explicitly deselect it. To do this with the SD card, set pin 4 as an output and write a high to it. For the W5100, set digital pin 10 as a high output.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDocuments\u003cbr\u003e\n\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca title=\"Arduino Ethernet Shield Getting Started Guide\" href=\"http:\/\/arduino.cc\/en\/Guide\/ArduinoEthernetShield\" target=\"_new\" rel=\"noopener noreferrer\"\u003eGetting Started\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca title=\"Arduino Ethernet Shield Page\" href=\"http:\/\/arduino.cc\/en\/Main\/ArduinoEthernetShield\" rel=\"noopener noreferrer\"\u003eEthernet Shield Page\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Arduino","offers":[{"title":"Default Title","offer_id":42292817952959,"sku":"MLE00051","price":800.0,"currency_code":"PHP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0531\/3419\/6927\/files\/a0773b530a3c2a079ea02a15ebabc5af.jpg?v=1735815360"},{"product_id":"arduino-mega-proto-shield-v3","title":"ProtoShield V3 compatible with Mega R3 2560","description":"\u003ch1\u003eProtoShield V3 compatible with Mega R3 2560\u003c\/h1\u003e\n\u003cp\u003eThis ProtoShield V3 compatible with Mega R3 2560 makes it easy for you to design custom circuits. You can solder parts to the prototyping area to create your project, or use it with a small solderless breadboard to quickly test circuits ideas without having to solder. It's got extra connections for all of the Arduino I\/O pins, and it's got space to mount through-hole and surface mount integrated circuits. It's a convenient way to make your custom circuit and Arduino into a single module.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWide prototyping area\u003c\/li\u003e\n\u003cli\u003eSeamlessly plugged into the \u003ca href=\"https:\/\/www.makerlab-electronics.com\/product\/arduino-mega-2560-r3\/\"\u003eArduino Mega2560\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eArduino pinout\u003c\/li\u003e\n\u003cli\u003eReset button\u003c\/li\u003e\n\u003cli\u003eIndicator of power and status\u003c\/li\u003e\n\u003cli\u003eSolder components directly\u003c\/li\u003e\n\u003cli\u003eICSP connector\u003c\/li\u003e\n\u003cli\u003e14 pin SMD footprint (50 mils pitch)\u003c\/li\u003e\n\u003cli\u003e20 pin Through Hole footprint (100 mils pitch)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Others","offers":[{"title":"Default Title","offer_id":42292821852351,"sku":"MLE00054","price":100.0,"currency_code":"PHP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0531\/3419\/6927\/files\/f86595d37e0a89f910d673f71516cf47.jpg?v=1735815277"},{"product_id":"wemos-d1-mini-lithium-battery-shield","title":"WeMos D1 Battery Shield Charger","description":"\u003ch1\u003e\u003cstrong\u003eWeMos D1 Battery Shield Charger\u003c\/strong\u003e\u003c\/h1\u003e\n\u003cp\u003eThis WeMos D1 Battery Shield Charger provides a means of powering your WeMos mini, or WeMos mini Pro from a single cell (3.7V) lithium battery. The shield contains a DC-DC converter to step-up the batteries 3.7V to 5V supplying your WeMos mini and shields with up to 1A of power. When the battery is depleted simply plug the shield into a USB power source using a mini USB cable and it will automatically recharge the battery. Two LEDs on the shield indicate when the battery is charging and when charging has completed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCharging Voltage: 10V MAX 5V Recommended\u003c\/li\u003e\n\u003cli\u003eCharging Current: 1A\u003c\/li\u003e\n\u003cli\u003eLithium Battery Voltage: 3.3-4.2V\u003c\/li\u003e\n\u003cli\u003eBoost Power Supply: 5V (Max 1A)\u003c\/li\u003e\n\u003cli\u003eDimension: 28 x 25 x 8 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 5.5 g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePorts:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eXH2-2.54mm (Port 1): Connect to lithium battery (3.3-4.2V)\u003c\/li\u003e\n\u003cli\u003eMicro USB: Charging Port (5V)\u003c\/li\u003e\n\u003cli\u003eGreen LED: Illuminates when charging is complete\u003c\/li\u003e\n\u003cli\u003eRed LED: Illuminates when charging is in progress\u003c\/li\u003e\n\u003cli\u003eJ1: Sets the maximum charging current: 0.5A or 1A\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Others","offers":[{"title":"Default Title","offer_id":42292829290687,"sku":"MLE00058","price":100.0,"currency_code":"PHP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0531\/3419\/6927\/files\/7f84f55249fe214ec99c69e66258ae94.jpg?v=1735815201"},{"product_id":"arduino-nano-cnc-shield-expansion-board","title":"Nano CNC Shield Expansion Board","description":"\u003ch1\u003e\u003cstrong\u003eNano CNC Shield Expansion Board\u003c\/strong\u003e\u003c\/h1\u003e\n\u003cp\u003eThis CNC Shield expansion board can be used as a drive expansion board for engraving machines and need to be used with Arduino NANO. There’re 3 slots in the board for stepper motor drive modules, can drive 3 stepper motors, and each step stepper motor only need two IO port, that is to say, 6 IO ports can quite well to manage three stepper motor, it’s very convenient to use.\u003c\/p\u003e\n\u003cp\u003eCNC Shield has some GPIO of Arduino NANO, it’s convenient for connect other modules, like limit switch. Also, CNC Shield V4.0 also has I2C interface, you can connect LCD screen which has the I2C interface.\u003cbr\u003e\nThe input voltage of CNC Shield V4.0 is DC 7.5V-12V, do not higher than 12V.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e3 axis stepper motor driver\u003c\/li\u003e\n\u003cli\u003eCompatible with micro-drive laser engraving machine, three-axis CNC engraving machine,.\u003c\/li\u003e\n\u003cli\u003e2A can be controlled within the two-phase four-wire stepper motor.\u003c\/li\u003e\n\u003cli\u003eReleased the digital IO interface, easy to connect to other modules, such as ENDSTOP.\u003c\/li\u003e\n\u003cli\u003eReleased the I2C interface, you can connect to the LCD I2C or other I2C module.\u003c\/li\u003e\n\u003cli\u003epower DC5v interface, 7.5-12V voltage input.\u003c\/li\u003e\n\u003cli\u003eGRBL compatible\u003c\/li\u003e\n\u003cli\u003eworked with arduino nano.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Others","offers":[{"title":"Default Title","offer_id":42292840726719,"sku":"MLE00840","price":150.0,"currency_code":"PHP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0531\/3419\/6927\/files\/ph-11134207-7qul2-lf0up2qww366b8.jpg?v=1735815005"}],"url":"https:\/\/makerlab.ph\/collections\/shields-compatible-with-arduino.oembed","provider":"Makerlab PH","version":"1.0","type":"link"}