{"title":"M5Stack","description":"","products":[{"product_id":"m5stack-esp32-basic-core-iot-development-kit-v2-6","title":"M5Stack ESP32 Basic Core IoT Development Kit V2.6","description":"\u003ch2 id=\"description\"\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBASIC \u003c\/strong\u003eis a cost-effective entry-level IoT main controller. It adopts Espressif ESP32 chipset, equipped with 2 low-power Xtensa® 32-bit LX6 microprocessors with main frequency up to 240MHz. Built-in 16M FLASH memory, integrated 2.0-inch full-color HD IPS display panel, speaker, TFCard slot and other peripherals. The full-coverage housing ensures circuit stability even in complex industrial applications. Internal provides a variety interface resources (ADC\/DAC\/I2C\/UART\/SPI, etc.) and 15x IO pins at the bottom, which is highly developable. Ideal for a variety of product prototyping, industrial control, intelligent building application.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh productization:\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eExquisite designs, Prototyping right into products\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eProduct-grade full-coverage cover for more stable circuit operation\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eLow Code Development:\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eSupport UIFlow graphical programming platform, scripting-free, cloud push\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFully compatible with mainstream development platforms such as Arduino and ESP32-IDF\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSupport FreeRTOS, with dual-core and multitasking mechanism, it can perform the tasks efficiently, Program optimization.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eHigh Integration:\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e2.0 inch IPS display panel, speakers, custom buttons x3\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuilt-in lithium battery power, integrated power management chip, support TypeC interface\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFinely tuned RF circuit for stable and reliable wireless communication\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eStrong Expandability:\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e15x IO leads\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eEasy access to M5Stack's hardware and software ecology system, stackable module design, plug-and-play rich sensors expansion\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"tip\"\u003e\u003cstrong\u003ePower on\/off operation\u003c\/strong\u003e:\u003cbr\u003e\u003cstrong\u003ePower on\u003c\/strong\u003e: Click the red power button on the left\u003cbr\u003e\u003cstrong\u003eShutdown\u003c\/strong\u003e: Quickly double-click the red power button on the left\u003cbr\u003e*\u003cem\u003eUSB power supply\u003c\/em\u003e *: By default, when USB is powered, it cannot be shut down\u003c\/p\u003e\n\u003ch2 id=\"driver-installation\"\u003e\u003cstrong\u003eDriver Installation:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eClick the link below to download the driver that matches the operating system. There are currently two driver chip versions, CP210X (for \u003ccode\u003eCP2104\u003c\/code\u003e version)\/CP34X (for \u003ccode\u003eCH9102\u003c\/code\u003e version) driver compressed package. After decompressing the compressed package, select the installation package corresponding to the number of operating systems to install. (If you are not sure which USB chip your device uses, you can install two drivers at the same time. During the installation process of \u003ccode\u003eCH9102_VCP_SER_MacOS\u003c\/code\u003e, an error may occur, but the installation is actually completed, just ignore it.)\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eDriver name\u003c\/th\u003e\n\u003cth\u003eApplicable driver chip\u003c\/th\u003e\n\u003cth\u003eDownload link\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCP210x_VCP_Windows\u003c\/td\u003e\n\u003ctd\u003eCP2104\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/m5stack.oss-cn-shenzhen.aliyuncs.com\/resource\/drivers\/CP210x_VCP_Windows.zip\" rel=\"noopener\" target=\"_blank\"\u003eDownload\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCP210x_VCP_MacOS\u003c\/td\u003e\n\u003ctd\u003eCP2104\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/m5stack.oss-cn-shenzhen.aliyuncs.com\/resource\/drivers\/CP210x_VCP_MacOS.zip\" rel=\"noopener\" target=\"_blank\"\u003eDownload\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCP210x_VCP_Linux\u003c\/td\u003e\n\u003ctd\u003eCP2104\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/m5stack.oss-cn-shenzhen.aliyuncs.com\/resource\/drivers\/CP210x_VCP_Linux.zip\" rel=\"noopener\" target=\"_blank\"\u003eDownload\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCH9102_VCP_SER_Windows\u003c\/td\u003e\n\u003ctd\u003eCH9102\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/m5stack.oss-cn-shenzhen.aliyuncs.com\/resource\/drivers\/CH9102_VCP_SER_Windows.exe\" rel=\"noopener\" target=\"_blank\"\u003eDownload\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCH9102_VCP_SER_MacOS\u003c\/td\u003e\n\u003ctd\u003eCH9102\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/m5stack.oss-cn-shenzhen.aliyuncs.com\/resource\/drivers\/CH9102_VCP_MacOS.dmg\" rel=\"noopener\" target=\"_blank\"\u003eDownload\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003e\u003cbr\u003e\u003c\/h2\u003e\n\u003ch2 id=\"product-features\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBased on ESP32 development\u003c\/li\u003e\n\u003cli\u003e16M FLASH\u003c\/li\u003e\n\u003cli\u003eIntegrated full-color high-definition IPS display panel and a variety of hardware peripherals\u003c\/li\u003e\n\u003cli\u003eRich resources interface, compatible with M5Stack stacking modules and sensors, highly expandable.\u003c\/li\u003e\n\u003cli\u003eUse \u003ca href=\"https:\/\/shop.m5stack.com\/zh_CN\/base\/core_bottom\" rel=\"noopener\" target=\"_blank\"\u003eM5CORE BOTTOM base \u003c\/a\u003ebuilt-in lithium battery, 15x IO leads.\u003c\/li\u003e\n\u003cli\u003eCompatible with multi-platform development:\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/flow.m5stack.com\/\" rel=\"noopener\" target=\"_blank\"\u003eUIFlow\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/micropython.org\/\" rel=\"noopener\" target=\"_blank\"\u003eMicroPython\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/www.arduino.cc\/\" rel=\"noopener\" target=\"_blank\"\u003eArduino\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv data-docx-has-block-data=\"false\" data-lark-html-role=\"root\" data-page-id=\"POKCdgGPTobwRbxIDQplHVnag8f\"\u003e\n\u003ch2 class=\"heading-3 ace-line old-record-id-ZB3ndx9XOoML7XxO0tblKaGGgEj\"\u003e\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli class=\"ace-line ace-line old-record-id-NfuHdLnQDohBwlxnjw3lWGd0gIe\"\u003e\n\u003cstrong\u003eProduct code: \u003c\/strong\u003eK001-V26\u003c\/li\u003e\n\u003cli class=\"ace-line ace-line old-record-id-NfuHdLnQDohBwlxnjw3lWGd0gIe\"\u003e\n\u003cstrong\u003eESP32-D0WDQ6-V3: \u003c\/strong\u003e240MHz dual core, 600 DMIPS, 520KB SRAM, Wi-Fi\u003c\/li\u003e\n\u003cli class=\"ace-line ace-line old-record-id-Y6X9dKtY3oTjvbxPuRVlLFYkg7f\"\u003e\n\u003cstrong\u003eFlash: \u003c\/strong\u003e16MB\u003c\/li\u003e\n\u003cli class=\"ace-line ace-line old-record-id-KZPGd7lJuouLFzx2w8Sl65bEgHd\"\u003e\n\u003cstrong\u003eInput power: \u003c\/strong\u003e5V @ 500mA\u003c\/li\u003e\n\u003cli class=\"ace-line ace-line old-record-id-JBNNdlfY1oHMOLx8weblVqMogUe\"\u003e\n\u003cstrong\u003eInterface:\u003c\/strong\u003e TypeC x1, I2C x1\u003c\/li\u003e\n\u003cli class=\"ace-line ace-line old-record-id-JqvddfOKvoPlPaxO0BWlpbi6g2f\"\u003e\n\u003cstrong\u003eIO:\u003c\/strong\u003e G21, G22, G23, G19, G18, G3, G1, G16, G17, G2, G5, G25, G26, G35, G36\u003c\/li\u003e\n\u003cli class=\"ace-line ace-line old-record-id-QSu0dWqpUokMogxbhDLl7z3BgPi\"\u003e\n\u003cstrong\u003eButton: \u003c\/strong\u003ePhysical button x 3\u003c\/li\u003e\n\u003cli class=\"ace-line ace-line old-record-id-T2c6dG7jAoQjZVxs8SElnC8Jg9e\"\u003e\n\u003cstrong\u003eLCD screen: \u003c\/strong\u003e2.0\"@320*240 ILI9342C IPS panel, maximum brightness 853nit\u003c\/li\u003e\n\u003cli class=\"ace-line ace-line old-record-id-M7Pqdy0nuomuI1xwh9llmTJsg5c\"\u003e\n\u003cstrong\u003eSpeaker: \u003c\/strong\u003e1W-0928\u003c\/li\u003e\n\u003cli class=\"ace-line ace-line old-record-id-Qnq8dEIEGoe6uRxlCg1lqPFygdb\"\u003e\n\u003cstrong\u003eUSB chip: \u003c\/strong\u003eCH9102F\u003c\/li\u003e\n\u003cli class=\"ace-line ace-line old-record-id-XMZNd2WG4olbHBx9wjFlBBB7gvc\"\u003e\n\u003cstrong\u003eAntenna: \u003c\/strong\u003e2.4G 3D Antenna\u003c\/li\u003e\n\u003cli class=\"ace-line ace-line old-record-id-FbKgdZDEyocdmRxmZJQlnQHMgXg\"\u003e\n\u003cstrong\u003eBattery: \u003c\/strong\u003e110mAh @ 3.7V\u003c\/li\u003e\n\u003cli class=\"ace-line ace-line old-record-id-U1pEdrXNJoeGAdxsQDtlP70ngzf\"\u003e\n\u003cstrong\u003eNet weight: \u003c\/strong\u003e47.2g\u003c\/li\u003e\n\u003cli class=\"ace-line ace-line old-record-id-XylZdaLGwoBPUcxEO86lI8Wfged\"\u003e\n\u003cstrong\u003eGross weight:\u003c\/strong\u003e 93g\u003c\/li\u003e\n\u003cli class=\"ace-line ace-line old-record-id-RSO1d8oDIo814uxEUjllH7AvgUg\"\u003e\n\u003cstrong\u003eProduct size:\u003c\/strong\u003e 54mm x 54mm x 18mm\u003c\/li\u003e\n\u003cli class=\"ace-line ace-line old-record-id-WrmZdAGWTolBArxYYMjl21whgWy\"\u003e\n\u003cstrong\u003ePacking size: \u003c\/strong\u003e95 x 65 x 25mm\u003c\/li\u003e\n\u003cli class=\"ace-line ace-line old-record-id-FWBadGBCwoGGGBxCTvalfJ8Lgkf\"\u003e\n\u003cstrong\u003eCover Material: \u003c\/strong\u003ePlastic ( PC )\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch2 id=\"specifications\"\u003e\u003c\/h2\u003e\n\u003ch2 id=\"application\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eIoT Controller\u003c\/li\u003e\n\u003cli\u003eDIY creator works\u003c\/li\u003e\n\u003cli\u003eSmart home control\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"included\"\u003e\u003cstrong\u003ePart List:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x BASIC\u003c\/li\u003e\n\u003cli\u003e10x Dupont line\u003c\/li\u003e\n\u003cli\u003e1x Type-C USB(20cm)\u003c\/li\u003e\n\u003cli\u003e1x manual\u003c\/li\u003e\n\u003cli\u003e1x sticker\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv data-docx-has-block-data=\"false\" data-lark-html-role=\"root\" data-page-id=\"POKCdgGPTobwRbxIDQplHVnag8f\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003ch2 id=\"specifications\"\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cbr\u003e\n\u003c\/h2\u003e","brand":"M5Stack","offers":[{"title":"Default Title","offer_id":42291107791039,"sku":"MLE03334","price":2900.0,"currency_code":"PHP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0531\/3419\/6927\/files\/MLE03334_3.jpg?v=1745472105"},{"product_id":"m5stack-fire-iot-development-kit-psram-v2-6","title":"M5Stack FIRE IoT Development Kit (PSRAM) V2.6","description":"\u003ch2\u003e\n\u003cstrong\u003eDescription: \u003c\/strong\u003e\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003eM5Stack FIRE is a cost-effective Wi-Fi\u003ca href=\"https:\/\/shop.m5stack.com\/products\/m5stack-core2-esp32-iot-development-kit-for-aws-iot-edukit\"\u003e\u003cspan\u003e \u003c\/span\u003eIoT development kit\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003ethat utilizes the Espressif ESP32 main control chip. It features two low-power Xtensa® 32-bit LX6 microprocessors with a main frequency of up to 240MHz. With 8M PSRAM + 16M FLASH memory, a 2.0-inch full-color HD IPS display panel, and various peripherals including an IMU, LED, microphone, speaker, and TFCard slot, this controller offers a comprehensive set of features for product prototyping, industrial control, and smart building applications.\u003c\/p\u003e\n\u003cp\u003eDesigned for productization, the M5Stack FIRE comes with an exquisite design and a full-coverage case, ensuring stable circuit operation even in complex industrial environments. It offers a wide range of common interface resources such as ADC, DAC, I2C, UART, and SPI, allowing for easy expansion and customization of your projects.\u003c\/p\u003e\n\u003cp\u003eThe M5Stack FIRE provides a user-friendly development experience. It supports the UIFlow graphical programming platform, eliminating the need for extensive coding. It is also fully compatible with popular development platforms like Arduino and ESP32-IDF, providing flexibility and compatibility. Additionally, it supports FreeRTOS, enabling efficient multitasking and program\u003c\/p\u003e\n\u003cp style=\"padding-left: 40px;\" class=\"warn\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003eGPIO 16 \/ 17 of FIRE are connected to PSRAM by default, so when you connect or stack other modules, you need to pay attention to avoid conflicts with these two pins to prevent the device from not working properly and generating instability.\u003c\/p\u003e\n\u003cp style=\"padding-left: 40px;\" class=\"tip\"\u003e\u003cstrong\u003eSwitching operations:\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003ePower on: \u003c\/strong\u003eClick the red button on the left\u003cbr\u003e\u003cstrong\u003ePower off\u003c\/strong\u003e: Quickly double-click the red button on the left\u003cbr\u003e\u003cstrong\u003eUSB power\u003c\/strong\u003e: By default, It cannot be shutdown when USB power is on.\u003c\/p\u003e\n\u003cp style=\"padding-left: 40px;\" class=\"warn\"\u003e\u003cstrong\u003eUSB drive: \u003c\/strong\u003eBefore using, please go to \u003ca href=\"https:\/\/shop.m5stack.com\/en\/download\" rel=\"noopener\" target=\"_blank\"\u003edownload page \u003c\/a\u003eto download the USB driver that matches your operating system, and install it.\u003cbr\u003eNote: \u003cstrong\u003eFIRE\u003c\/strong\u003e currently has two CP2104\/CH9102F A USB chip version, users can install the drivers (\u003ccode\u003eCH34x\u003c\/code\u003e and \u003ccode\u003eCP210x\u003c\/code\u003e) that are compatible with two ICs at the same time to ensure that the device drivers work normally.\u003c\/p\u003e\n\u003ch2 id=\"product-features\"\u003e\u003cstrong\u003eFeatures: \u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBased on ESP32 development\u003c\/li\u003e\n\u003cli\u003e8M PSRAM + 16M FLASH memory combination\u003c\/li\u003e\n\u003cli\u003eIntegrated HD IPS display panel with various hardware peripherals\u003c\/li\u003e\n\u003cli\u003eRich resources interface, compatible with M5Stack stacking modules and sensors, highly expandable.\u003c\/li\u003e\n\u003cli\u003eAdopt \u003ca href=\"https:\/\/shop.m5stack.com\/en\/base\/m5go_bottom\" rel=\"noopener\" target=\"_blank\"\u003eM5GO BOTTOM base \u003c\/a\u003ecompatible with 8mm size LEGO blocks, the structure is full of fun to build.\u003c\/li\u003e\n\u003cli\u003eMicrosoft Azure authentication device\u003c\/li\u003e\n\u003cli\u003eCompatible with multi-platform development:\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/flow.m5stack.com\/\" rel=\"noopener\" target=\"_blank\"\u003eUIFlow\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/micropython.org\/\" rel=\"noopener\" target=\"_blank\"\u003eMicroPython\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/www.arduino.cc\/\" rel=\"noopener\" target=\"_blank\"\u003eArduino\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/nanoframework\/nanoFramework.M5Stack\" target=\"_blank\"\u003e.NET nanoFramework\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Code: \u003c\/strong\u003eK007-V26\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eESP32-D0WDQ6-V3: \u003c\/strong\u003e240MHz dual core, 600 DMIPS, 520KB SRAM, Wi-Fi\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlash: \u003c\/strong\u003e16MB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePSRAM: \u003c\/strong\u003e8MB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput power: \u003c\/strong\u003e5V @ 500mA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInterface: \u003c\/strong\u003eTypeC x1, POGO PIN x1, I2C x1, GPIO x1, UART x1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKeys: \u003c\/strong\u003eCustom Keys x 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLCD screen: \u003c\/strong\u003e2.0\"@320*240 ILI9342C IPS panel, maximum brightness 853nit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeaker: \u003c\/strong\u003e1W-0928\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMicrophone: \u003c\/strong\u003eAnalog BSE3729 Microphone\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIMU:\u003c\/strong\u003e 6-axis MPU6886\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB Chip:\u003c\/strong\u003e CH9102F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED: \u003c\/strong\u003eSK6812 RGB LED x 10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAntenna: \u003c\/strong\u003e2.4G 3D antenna\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery:\u003c\/strong\u003e 500 mAh @ 3.7V \u003cstrong\u003e   \u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Temperature:\u003c\/strong\u003e 0°C to 40°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet Weight: \u003c\/strong\u003e62.3g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGross Weight: \u003c\/strong\u003e162g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions: \u003c\/strong\u003e54mm x 54mm x 30.5mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Size:\u003c\/strong\u003e 105mm x 65mm x 40mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCover Material:\u003c\/strong\u003e Plastic ( PC )\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"applications\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eIoT Controller\u003c\/li\u003e\n\u003cli\u003eDIY creator works\u003c\/li\u003e\n\u003cli\u003eSmart Home Control\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"included\"\u003e\u003cstrong\u003ePart List:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x M5Stack FIRE\u003c\/li\u003e\n\u003cli\u003e1x M5GO Charging Base\u003c\/li\u003e\n\u003cli\u003e2x LEGO Building Blocks\u003c\/li\u003e\n\u003cli\u003e5x LEGO Connections\u003c\/li\u003e\n\u003cli\u003e1x M3 Hex Wrench\u003c\/li\u003e\n\u003cli\u003e1x Type-C USB (50cm)\u003c\/li\u003e\n\u003cli\u003e1x User's Manual\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"M5Stack","offers":[{"title":"Default Title","offer_id":42291108970687,"sku":"MLE03335","price":3400.0,"currency_code":"PHP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0531\/3419\/6927\/files\/MLE03335.jpg?v=1746693630"},{"product_id":"atom-echo-smart-speaker-development-kit","title":"M5Stack ATOM Echo Smart Speaker Dev Kit","description":"\u003ch2\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eATOM ECHO\u003c\/strong\u003e is a Programmable Smart Speaker based on the M5ATOM design. Its form factor is very small, its dimensions are only 24 * 24 * 17 mm. Music can be played using the bluetooth capabilities of the ESP32 from a mobile phone or tablet. The device could be programmed to access AWS, Baidu and other cloud platforms, using the built-in microphone and speaker for voice interaction, so that ATOM ECHO has certain AI capabilities, realizing voice control, story telling, Internet of things and other functions. The speaker is embedded with an RGB LED (SK6812), which can visually display the connection status. In addition to being used as a Bluetooth speaker, it still has the control ability of Atom series.Screw hole on the back is convenient for users to fix.\u003c\/p\u003e\n\u003cp class=\"warn\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e please avoid such conditions with M5Stack Atom Echo.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDC output from I2S channel\u003c\/li\u003e\n\u003cli\u003ePlaying white noise for a long time\u003c\/li\u003e\n\u003cli\u003ePlaying full square-wave audio\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"product-features\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLight and small\u003c\/li\u003e\n\u003cli\u003eSupport STT services\u003c\/li\u003e\n\u003cli\u003eBased on ESP32, Support A2DP, BLE 4.0\u003c\/li\u003e\n\u003cli\u003e2.4G WiFi IEEE 802.11b\/g\/n\u003c\/li\u003e\n\u003cli\u003eBuilt-in microphone and speaker\u003c\/li\u003e\n\u003cli\u003eRGB LED status display indication\u003c\/li\u003e\n\u003cli\u003eGROVE extension interface\u003c\/li\u003e\n\u003cli\u003eRecord and playback\u003c\/li\u003e\n\u003cli\u003eProgrammable key\u003c\/li\u003e\n\u003cli\u003eProgramming platform: Arduino?ESP-IDF\/ADF\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eSpecifications: \u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct code: \u003c\/strong\u003eC008-C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSoC: \u003c\/strong\u003eESP-PICO-D4, 240MHz, Dual Core, Wi-Fi\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlash:\u003c\/strong\u003e 4MB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInterface:\u003c\/strong\u003e 1x IR-TX,1x Function Button,1x Reset Button\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePinOut:\u003c\/strong\u003e G21\/G25\/5V\/GND, 3V3\/G22\/G19\/G23\/G33\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRGB LED:\u003c\/strong\u003e SK6812\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeaker:\u003c\/strong\u003e 0.5W\/NS4168 I2S\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMicrophone:\u003c\/strong\u003e SPM1423 PDM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet weight:\u003c\/strong\u003e 5g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGross weight:\u003c\/strong\u003e 10g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Size:\u003c\/strong\u003e 24*24*17mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Size:\u003c\/strong\u003e 63*63*12mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCase Material:\u003c\/strong\u003e Plastic ( PC )\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"applications\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBluetooth Speaker\u003c\/li\u003e\n\u003cli\u003eVoice control\u003c\/li\u003e\n\u003cli\u003eIoT\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"include\"\u003e\u003cstrong\u003ePart List:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x ATOM ECHO\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"M5Stack","offers":[{"title":"Default Title","offer_id":42291109527743,"sku":"MLE03338","price":1099.0,"currency_code":"PHP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0531\/3419\/6927\/files\/MLE03338_2.jpg?v=1745975020"},{"product_id":"m5stamp-pico-diy-kit","title":"M5Stack M5Stamp Pico DIY Kit","description":"\u003ch2\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSTAMP-PICO\u003c\/strong\u003e features an ultra-compact design with two low-power \u003ccode\u003eXtensa® 32-bit LX6 microprocessors\u003c\/code\u003e at \u003ccode\u003e240MHz\u003c\/code\u003e on a PCB as tiny and delicate as a postage stamp. low power consumption. It is ideal for any space-constrained or battery-powered devices such as wearables, medical devices, sensors, and other \u003ccode\u003eIoT\u003c\/code\u003e devices.\u003c\/p\u003e\n\u003cp style=\"padding-left: 40px;\"\u003e1. \u003cstrong\u003e\u003ccode\u003eMULTIFORM\u003c\/code\u003e:\u003c\/strong\u003e 5 options of installation, means endless possibilities! (SMT, DIP, flywire, grove interface), with a high-temperature resistant plastic shell, 3D antenna and components can be better protected.\u003c\/p\u003e\n\u003cp style=\"padding-left: 40px;\"\u003e2. \u003cstrong\u003e\u003ccode\u003eLOW-CODE DEVELOPMENT\u003c\/code\u003e:\u003c\/strong\u003e STAMP-PICO supports UIFlow graphical programming platform, scripting-free, cloud push; and fully compatible with Arduino, MicroPython, ESP32-IDF, and other mainstream development platforms to quickly build various applications.\u003c\/p\u003e\n\u003cp style=\"padding-left: 40px;\"\u003e3. \u003cstrong\u003e\u003ccode\u003eHIGH INTEGRATION\u003c\/code\u003e:\u003c\/strong\u003e STAMP-PICO contains 5V-\u0026gt;3.3V DC\/DC port, GPIOx12, programmable RGB light x1, button x1, finely tuned RF circuit, providing stable and reliable wireless communication.\u003c\/p\u003e\n\u003cp style=\"padding-left: 40px;\"\u003e4.\u003cstrong\u003e \u003ccode\u003eSTRONG EXPANDABILITY\u003c\/code\u003e:\u003c\/strong\u003e Easy access to M5Stack's hardware and software ecology system: a wealth of sensors, actuators, functional modules, and accessories to choose from, Extremely fast adaptation.\u003c\/p\u003e\n\u003ch2 id=\"product-features\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eChip-set: ESP32-PICO-D4 (2.4GHz Wi-Fi and Bluetooth dual mode)\u003c\/li\u003e\n\u003cli\u003eSupport UIFlow graphical programming\u003c\/li\u003e\n\u003cli\u003eMulti-IO pinout, support multiple application forms (SMT, DIP, fly-by-wire)\u003c\/li\u003e\n\u003cli\u003eIntegrated programmable RGB LEDs and buttons\u003c\/li\u003e\n\u003cli\u003eMiniature module\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Code:\u003c\/strong\u003e K051-B\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaster Control Resource: \u003c\/strong\u003eESP32-PICO-D4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlash: \u003c\/strong\u003e4MB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput Voltage: \u003c\/strong\u003e5V @ 500mA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower consumption:\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eNormal standby:5V@29mA\u003c\/li\u003e\n\u003cli\u003eWIFI STA mode: 5V@60mA\u003c\/li\u003e\n\u003cli\u003eBT mode data sending status: 5V@84mA\u003c\/li\u003e\n\u003cli\u003eDeep-sleep mode: 5V@0.35mA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWireless communication distance: \u003c\/strong\u003eAP Mode: 16m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUI: \u003c\/strong\u003eProgrammable physical keys x 1, Programmable RGB LED (SK6812) x 1\u003c\/li\u003e\n\u003cli\u003eAntenna Type: 2.4G 3D Antenna\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWi-Fi:\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e802.11 b\/g\/n (up to 150 Mbps for 802.11n)\u003c\/li\u003e\n\u003cli\u003eSpectrum range: 2.4 GHz ~ 2.5 GHz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModule Resource Interface:\u003c\/strong\u003e ADC, DAC, touch sensor, SD\/SDIO\/MMC host controller, SPI, SDIO\/SPI slave controller, EMAC, motor PWM, LED PWM, UART, I2C, I2S, IR remote controller, GPIO, pulse counter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIO interface x12: \u003c\/strong\u003eG0, G1, G3, G26, G36, G18, G19, G21, G22, G25, G32, G33\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIO interface spacing: \u003c\/strong\u003e2.54mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating temperature: \u003c\/strong\u003e0°C to 60°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet weight: \u003c\/strong\u003e2.6g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eM5Stamp Pico (5pcs) Gross weight: \u003c\/strong\u003e18g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eM5Stamp Pico Mate Gross weight: \u003c\/strong\u003e6g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eM5Stamp Pico DIY Kit Gross weight: \u003c\/strong\u003e12g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions: \u003c\/strong\u003e18 * 24 * 4.6mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Size: \u003c\/strong\u003e85*55mm sealing bag (translucent)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"applications\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eInstrumentation\u003c\/li\u003e\n\u003cli\u003eWi-Fi Remote Monitoring\/Control\u003c\/li\u003e\n\u003cli\u003eSmart Home\u003c\/li\u003e\n\u003cli\u003eColor LED Control\u003c\/li\u003e\n\u003cli\u003eFire\/security intelligent integrated management\u003c\/li\u003e\n\u003cli\u003eSmart Card Terminal\u003c\/li\u003e\n\u003cli\u003eWireless POS\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"include\"\u003e\u003cstrong\u003ePart List:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eM5Stamp Pico DIY Kit:\n\u003cul\u003e\n\u003cli\u003e1 x M5Stamp Pico\u003c\/li\u003e\n\u003cli\u003e1 x Sticker\u003c\/li\u003e\n\u003cli\u003e4 x Pin Headers\u003c\/li\u003e\n\u003cli\u003e1 x 90° Grove Connector\u003c\/li\u003e\n\u003cli\u003e1 x Hex Key\u003c\/li\u003e\n\u003cli\u003e1 x ESP32 Downloade\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003cimg width=\"100%\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0531\/3419\/6927\/files\/stamp_pico_pins.webp\" class=\"lazypreload\"\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"M5Stack","offers":[{"title":"Default Title","offer_id":42291111198911,"sku":"MLE03341","price":1200.0,"currency_code":"PHP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0531\/3419\/6927\/files\/MLE03341.jpg?v=1746752072"},{"product_id":"battery-module-for-esp32-core-development-kit","title":"M5Stack Battery Module for Arduino ESP32 Core Development Kit","description":"\u003ch2\u003e\u003cstrong\u003eDescription:\u003cbr\u003e\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBATTERY\u003c\/strong\u003e: The Battery extension module is a 750mAh battery ADD-ON.\u003c\/p\u003e\n\u003cp\u003eWould you like to make a demo or prototype that requires longer battery life? Perhaps using the battery in M5GO base and Basic base is not enough not for you.\u003c\/p\u003e\n\u003cp\u003eHere comes the BATTERY which is a handy M5modules to upgrade your Lipo battery life. Since the Lipo batteries can work in parallel, you can stack multiple batteries to maximize your power endurance.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eCAUTION\u003c\/strong\u003e: The safety of Lipo battery is affected by many conditions. Overcharge, over-discharge, over-temperature, short circuit, crush and nail penetration may all result in a catastrophic failure, including the pouch rupturing, the electrolyte leaking, and fire. Although every battery we offer have accompany by a protection circuit board, using Lipo battery in you product still needs to be treated with caution\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eOnce the BATTERY is stacked underneath the M5 controller, the battery positive pole is connected to VBAT pin at IP5306\u003c\/p\u003e\n\u003ch2 id=\"product-features\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e750mAh High-Capacity Battery\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Code: \u003c\/strong\u003eM002\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet weight: \u003c\/strong\u003e24g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGross weight:\u003c\/strong\u003e 36g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Size:\u003c\/strong\u003e 54*54*14mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Size: \u003c\/strong\u003e60*57*17mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"include\"\u003e\u003cstrong\u003ePart List:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x M5Stack BATTERY Module\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"M5Stack","offers":[{"title":"Default Title","offer_id":42291111559359,"sku":"MLE03344","price":550.0,"currency_code":"PHP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0531\/3419\/6927\/files\/MLE03344.jpg?v=1746689909"},{"product_id":"gps-module-with-internal-external-antenna-u-blox-neo-m8n","title":"M5Stack GPS Module with Internal \u0026 External Antenna","description":"\u003ch2\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eGPS\u003c\/strong\u003e is build with u-blox M8 NEO-M8N module with an integrated built in active antenna.\u003c\/p\u003e\n\u003cp\u003eThe NEO-M8 series provides high sensitivity and minimal acquisition times while maintaining low power usage.\u003c\/p\u003e\n\u003cp\u003eThe NEO-M8N integrates a 72-channel \u003ca rel=\"noopener\" href=\"https:\/\/www.u-blox.com\/\" target=\"_blank\"\u003eu-blox \u003c\/a\u003eM8 GNSS engine that supports multiple GNSS systems ( Beidou, Galileo, GLONASS, GPS \/ QZSS ) and able to receive 3 GNSS systems simultaneously.\u003c\/p\u003e\n\u003cp\u003eThe series communicate protocol between M5Core and GPS is UART, physically connected via \u003cstrong\u003eUART2 (GPIO16, GPIO17)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf you want to change the UART baud-rate, please check here ( \u003ca rel=\"noopener\" href=\"https:\/\/www.u-blox.com\/en\/product\/u-center-windows\" target=\"_blank\"\u003eu-center-just-for-Windows \u003c\/a\u003e)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNotice: GPS signal can only be found outdoors\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eUART protocol: baud rate (default is 9600bps), data bit (8 bits), start bit (1 bit), stop bit (1 bit), Parity (none)\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg width=\"100%\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0531\/3419\/6927\/files\/module_gps_note01.webp\" class=\"lazypreload\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eM5Stack Fire\u003c\/strong\u003e has occupied GPIO16 \/ 17 to connect with the PSRAM by default, it's conflict with TXD \/ RXD (GPIO16, GPIO17) of GPS module. Therefore, when using the GPS module with the M5Stack Fire, you might have to cut the TXD and RXD from GPS module and wire fly to another set of UART pin\u003c\/p\u003e\n\u003ch2 id=\"product-features\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOperating voltage: 2.7 ~ 3.6\u003c\/li\u003e\n\u003cli\u003eOperating temperature: -40 ~ 80 °C\u003c\/li\u003e\n\u003cli\u003eAntenna type: built-in ceramic antenna and external antenna\u003c\/li\u003e\n\u003cli\u003eexternal Antenna port: SMA\u003c\/li\u003e\n\u003cli\u003eCan receive data from 3 GNSS systems concurrently\u003c\/li\u003e\n\u003cli\u003eHorizontal position accuracy: minimum 2.5m\u003c\/li\u003e\n\u003cli\u003eGPS module (NEO-M8N) Built-in Flash, so that you can upgrade firmware via \u003ca rel=\"noopener\" href=\"https:\/\/www.u-blox.com\/en\/product\/u-center-windows\" target=\"_blank\"\u003eu-center-just-for-Windows\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eSupported protocols: NMEA, UBX, RTCM\u003c\/li\u003e\n\u003cli\u003eIndustry leading -167dBm sensitivity\u003c\/li\u003e\n\u003cli\u003eBackward compatibility with NEO?7 and NEO?6 series\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct code: \u003c\/strong\u003eM003\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet weight:\u003c\/strong\u003e 43g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGross weight: \u003c\/strong\u003e73g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Size:\u003c\/strong\u003e 54*54*13mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Size:\u003c\/strong\u003e 125*68*23mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"applications\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eGPS-based logistics tracking management\u003c\/li\u003e\n\u003cli\u003eDriverless car positioning\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"include\"\u003e\u003cstrong\u003ePart List:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x GPS Module\u003c\/li\u003e\n\u003cli\u003e1x external Antenna(cable length : 1 meter)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"M5Stack","offers":[{"title":"Default Title","offer_id":42291111985343,"sku":"MLE03345","price":2500.0,"currency_code":"PHP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0531\/3419\/6927\/files\/MLE03345_1.jpg?v=1745827780"},{"product_id":"com-lorawan-module-915mhz-asr6501-with-antenna","title":"M5Stack COM.LoRaWAN Module 915MHz with Antenna","description":"\u003ch2\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eCOM.LoRaWAN915\u003c\/strong\u003e is a LoRaWAN communication module suitable for 915MHz frequency launched by M5Stack. The module adopts the ASR6501 solution, which supports long-distance communication and has both ultra-low power consumption and high sensitivity. The module integrates the LoRaWAN protocol stack and adopts a serial communication interface (using AT command set for control), and can be used as a collection node to access a large number of gateways for data collection and management.\u003c\/p\u003e\n\u003cp\u003eAn external power supply is provided (5V-12V input can be adjusted by switching the dial on-board switches). The module fits for long distance low power IoT communication applications, such as deployment of environmental monitoring nodes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThis module supports \u003ccode\u003eUS915\u003c\/code\u003e band plan only. NOT supports \u003ccode\u003eAU915\u003c\/code\u003e.\u003c\/li\u003e\n\u003cli class=\"warn\"\u003e\n\u003cspan\u003eWhen used with the Fire controller, due to PSRAM pin conflicts (G16\/G17), please switch the module base toggle switch pins to TX(G0\/G13), RX(G5\/G15).\u003c\/span\u003e\u003ccode class=\"language-cpp hljs\"\u003e\n\u003c\/code\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe module base has a DC power input interface. Please strictly follow the input range (5-12V) to prevent damage to the module when using this interface to connect to the power supply. The internal power DIP switch can adjust the voltage level of the internal terminal VIN to adapt to different modules.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0531\/3419\/6927\/files\/comx_dc_power.webp\" class=\"lazypreload\"\u003e\u003c\/p\u003e\n\u003ch2 id=\"product-features\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eASR6501\u003c\/li\u003e\n\u003cli\u003eSupported US915\u003c\/li\u003e\n\u003cli\u003eSMA antenna\u003c\/li\u003e\n\u003cli\u003eCommunication interface: UART\u003c\/li\u003e\n\u003cli\u003eCommand protocol: AT command\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct code: \u003c\/strong\u003eM031-C3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUART Baud Rate:\u003c\/strong\u003e 115200\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDC Interface Spec:\u003c\/strong\u003e 5.5mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet Weight:\u003c\/strong\u003e 35g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGross Weight:\u003c\/strong\u003e 72g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 54.2 x 54.2 x 13.2mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 165 x 60 x 36mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"application\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAutomatic remote meter reading\u003c\/li\u003e\n\u003cli\u003eIntelligent traffic intelligent parking lot\u003c\/li\u003e\n\u003cli\u003eRemote irrigation and environmental monitoring\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"includes\"\u003e\u003cstrong\u003ePart List:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x LoRaWAN915 Module\u003c\/li\u003e\n\u003cli\u003e1x SMA antenna\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"M5Stack","offers":[{"title":"Default Title","offer_id":42291112313023,"sku":"MLE03347","price":1400.0,"currency_code":"PHP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0531\/3419\/6927\/files\/MLE03347_2.jpg?v=1745808796"},{"product_id":"m5paper-esp32-development-kit-v1-1-960x540-4-7-eink-display-235-ppi","title":"M5Stack M5Paper ESP32 Development Kit V1.1","description":"\u003ch2\u003e\n\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eM5Paper v1.1\u003c\/strong\u003e is M5Stacks latest core device with a touch enabled E-ink display. Powered by the ESP32-D0WDQ6-V3 this is our first device to integrate a super sized 540*960 @4.7\" E-ink display,which supports 16 gray scale levels. The display is a GT911 capacitive touch screen,which supports two point touch and a variety of gesture controls . Compared to regular LCD, E-ink displays are easier on the eyes, which makes them a great choice for reading or viewing for longer periods. Other benefits are low power consumption and the ability to retain the image even if power to the display is terminated. Integrated in CoreInk is a multi-function button for operation, SHT30 temperature and moisture sensor, physical buttons and an TF-card(microSD) port for data storage.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eAdditionally, the FM24C02 internal eeprom chip provided 2K-bit(256x8)-EEPROM can be used to store vital data even when the device is off. A 1150mAh lithium polymer battery keeps the device going for long periods and battery life can be further preserved by using the RTC(BM8563) to set the device into deep sleep and wake it up again when needed。Three HY2.0-4P expansion ports are included which allow for building complex projects using the existing sensors in the M5Stack ecosystem.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eM5Paper v1.1 adopts flexible e-Ink screen panel, which is the same model as that of M5Paper v1.0 hard e-Ink screen panel. All features and specs are the same for both models. We are using CP2104 and CH9102 as the USB serial chip. Please install the relevant USB driver according to your device.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarning:\u003c\/strong\u003e\u003cbr\u003e1. Do not expose to ultraviolet rays for a long time, otherwise it may cause irreversible damage to the ink screen.\u003cbr\u003e2. The low-power power management solution adopted by M5Paper is different from CORE and StickC devices. When using it, the PWR button is used as the power-on button (long press for 2s). If you need to shut down the device, you need to use the software API or it is realized by pressing the reset button on the back. When using a USB power supply, it cannot be shut down.\u003cbr\u003e3. During use, if the program cannot be downloaded normally (the prompt is overtime or fails to write to target RAM), you can try to reinstall the device driver. For driver download, please see the content at the bottom of the document.\u003c\/p\u003e\n\u003ch2\u003e\n\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eESP32 Standard wireless functions Wi-Fi\u003c\/li\u003e\n\u003cli\u003eInternal 16M Flash\u003c\/li\u003e\n\u003cli\u003eLow Power Display\u003c\/li\u003e\n\u003cli\u003eMulti-Point touch screen\u003c\/li\u003e\n\u003cli\u003e180 degree viewing angle\u003c\/li\u003e\n\u003cli\u003eBuilt-in Magnet\u003c\/li\u003e\n\u003cli\u003eInternal 1150mAh Battery\u003c\/li\u003e\n\u003cli\u003eExpandable - HY2.0-4P 3 x external expansion ports\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Code:\u003c\/strong\u003e K049-B\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eESP32-D0WDQ6-V3:\u003c\/strong\u003e 240MHz dual core, 600 DMIPS, 520KB SRAM, Wi-Fi\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlash:\u003c\/strong\u003e 16MB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePSRAM:\u003c\/strong\u003e 8MB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput Voltage:\u003c\/strong\u003e 5V @ 500mA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePorts:\u003c\/strong\u003e TypeC*1, HY2.0-4P*3 , TF-card(microSD) slot\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eE-Ink Display:\u003c\/strong\u003e Model Number:EPD_ED047TC1 | 540*960@4.7\" | Gray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale: \u003c\/strong\u003e16 Levels | Display area : 58.32*103.68mm | Display Driver : IT8951E\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhysical Button:\u003c\/strong\u003e Multi-function button*1 , Reset Button*1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRTC:\u003c\/strong\u003e BM8563\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAntenna:\u003c\/strong\u003e 2.4G 3D Antenna\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePINS:\u003c\/strong\u003e G25, G32, G26, G33, G18, G19\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery: \u003c\/strong\u003e1150mAh@3.7V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking Temp:\u003c\/strong\u003e 0°C to 60°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet Weight: \u003c\/strong\u003e86g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGross Weight: \u003c\/strong\u003e100g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimension:\u003c\/strong\u003e 118*66x*10mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackaging Dimension:\u003c\/strong\u003e 120*70x*14mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCasing Material: \u003c\/strong\u003ePlastic ( PC )\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eIoT Terminal\u003c\/li\u003e\n\u003cli\u003eE-Book\u003c\/li\u003e\n\u003cli\u003eIndustrial Control Panel- Smart Home Panel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003ePart List:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e 1x M5Paper v1.1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"M5Stack","offers":[{"title":"Default Title","offer_id":42291112870079,"sku":"MLE03348","price":6500.0,"currency_code":"PHP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0531\/3419\/6927\/files\/MLE03348_2.jpg?v=1774946190"},{"product_id":"m5stack-esp32-core-ink-development-kit-1-54-elnk-display","title":"M5Stack Core Ink Development  Kit (1.54\" eInk Display)","description":"\u003ch2\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eCoreInk \u003c\/strong\u003e\u003cspan\u003eis an exciting addition to the M5Stack cores lineup, offering a brand new \u003c\/span\u003e\u003ca href=\"https:\/\/en.wikipedia.org\/wiki\/E_Ink\"\u003eE-ink\u003c\/a\u003e\u003cspan\u003e display experience. Powered by the ESP32-PICO-D4, this innovative device boasts a 1.54\" Black and White E-ink Display with a resolution of 200x200. Unlike traditional LCD screens, E-ink displays are known for being gentle on the eyes, making them a perfect choice for extended reading or viewing sessions. Additionally, they consume minimal power and can retain the displayed image even when power is disconnected.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eControlling the CoreInk is a breeze with its integrated multi-function button, physical button, status LED, and buzzer. These features provide intuitive control and feedback for a seamless user experience. The device is equipped with a 390mAh lithium polymer battery, ensuring sufficient power for extended usage. It also incorporates an RTC (BM8563) for precise timing control and supports deep sleep functionality to conserve energy.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe CoreInk sets itself apart with its independent reset and power buttons, allowing for convenient operation. Moreover, it offers expansion ports (HY2.0-4P, M-BUS, HAT expansion) that enable the attachment of external sensors, opening up a world of possibilities for expanding its functionality. With the CoreInk, users can unleash their creativity and explore unlimited potential\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCaution:\u003c\/strong\u003e Do not expose the device in ultraviolet rays for a long time, or it may damage the screen.\u003c\/p\u003e\n\u003cp class=\"warn\"\u003e\u003cstrong\u003ePrecautions:\u003c\/strong\u003e Please avoid long-time high-frequency refresh when using it. The recommended refresh interval is (15s\/time). Do not expose to ultraviolet rays for a long time, otherwise it may cause irreversible damage to the ink screen. The low-power power management solution adopted by CoreInk is different from that of CORE and StickC devices. When in use, the PWR button is used as a power-on button(long press 2s). If you need to shut down the device, you need to use the software API or press the reset button on the back.\u003c\/p\u003e\n\u003ch2 id=\"product-features\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eESP32 Standard wireless functions WiFi\u003c\/li\u003e\n\u003cli\u003eInternal 4M Flash\u003c\/li\u003e\n\u003cli\u003eLow Power Display\u003c\/li\u003e\n\u003cli\u003e180 degree viewing angle\u003c\/li\u003e\n\u003cli\u003eExpansion ports\u003c\/li\u003e\n\u003cli\u003eBuilt-in Magnet\u003c\/li\u003e\n\u003cli\u003eInternal Battery\u003c\/li\u003e\n\u003cli\u003eExpandable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Code: \u003c\/strong\u003eK048\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eESP32-PICO-D4: \u003c\/strong\u003e240MHz dual core, 600 DMIPS, 520KB SRAM, Wi-Fi\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlash: \u003c\/strong\u003e4MB Flash\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput Voltage: \u003c\/strong\u003e5V @ 500mA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePorts: \u003c\/strong\u003eTypeC*1, HY2.0-4P*1 , M-BUS Female Connector,Pin Array\/ Hat Expansion\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScreen: \u003c\/strong\u003eGDEW0154M09 | SPI Port | 200*200@1.54\" | Dpi:184 | 1-bit Black \u0026amp; White(Grayscale:2) \\ Viewing Area(mm):27.6x27.6 | Dot pitch(mm) 0.138x0.138 | Refresh Time（s） 0.82 \/Partial refresh（s） 0.24\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhysical Buttons: \u003c\/strong\u003eProgrammable *1 , Reset *1, Power *1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED: \u003c\/strong\u003eGreen LED x 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRTC: \u003c\/strong\u003eBM8563\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuzzer: \u003c\/strong\u003ePassive Buzzer*1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWifi: \u003c\/strong\u003e2.4G 3D Antenna\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePINS: \u003c\/strong\u003eG25, G26, G36, G23, G34, G18, G21, G22, G14, G13\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery:\u003c\/strong\u003e 390mAh@3.7V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking Temp: \u003c\/strong\u003e0°C to 60°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet Weight:\u003c\/strong\u003e 32g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGross Weight: \u003c\/strong\u003e55g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions: \u003c\/strong\u003e56*40*16mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Size:\u003c\/strong\u003e 82*46*20mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCase Material: \u003c\/strong\u003ePlastic ( PC )\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"application\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eIoT Terminal\u003c\/li\u003e\n\u003cli\u003eE-Book\u003c\/li\u003e\n\u003cli\u003eIndustrial Control Panel\u003c\/li\u003e\n\u003cli\u003eElectronic Tag\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"includes\"\u003e\u003cstrong\u003ePart List:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x CoreInk\u003c\/li\u003e\n\u003cli\u003e1x Type-C USB(20cm)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"M5Stack","offers":[{"title":"Default Title","offer_id":42291113263295,"sku":"MLE03349","price":2400.0,"currency_code":"PHP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0531\/3419\/6927\/files\/MLE03349.jpg?v=1746755850"},{"product_id":"time-of-flight-distance-ranging-sensor-unit-vl53l0x","title":"M5Stack Time-of-Flight Ranging Unit (VL53L0X)","description":"\u003ch2\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eToF\u003c\/strong\u003e that employs time-of-flight techniques to resolve distance between the emit point and the reach point of a subject, measuring the round trip time of an artificial light signal provided by a laser.\u003c\/p\u003e\n\u003cp\u003eThis unit integrated a distance measuring sensor VL53L0x providing accurate distance measurement whatever the target reflectance, unlike conventional technologies. It can measure absolute distances up to 2m in less than 30ms.\u003c\/p\u003e\n\u003cp\u003eThis unit communicates with M5Core via I2C(0x29).\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIn this case, make sure you use the 3.3V on SDA and SCL, M5Core GROVE provide 3.3V to data pins, 5V to power pin. only 3.3v allowed on VL53L0x.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"product-features\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHigh precision\u003c\/li\u003e\n\u003cli\u003eMeasure absolute distances up to 2m\u003c\/li\u003e\n\u003cli\u003eMeasurement accuracy ±3%\u003c\/li\u003e\n\u003cli\u003eThe wavelength of laser: 940nm\u003c\/li\u003e\n\u003cli\u003eProgram Platform: Arduino, UIFlow(Blockly, Python)\u003c\/li\u003e\n\u003cli\u003eTwo Lego-compatible holes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct code: \u003c\/strong\u003eU010\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMeasuring distance:\u003c\/strong\u003e 0.3-2m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMeasurement accuracy:\u003c\/strong\u003e ±3%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet weight:\u003c\/strong\u003e 4g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGross weight:\u003c\/strong\u003e 17g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Size:\u003c\/strong\u003e 32*24*8mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Size:\u003c\/strong\u003e 67*53*12mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"applications\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1D gesture recognition\u003c\/li\u003e\n\u003cli\u003eLaser Ranging\u003c\/li\u003e\n\u003cli\u003e3D structured light imaging?3D sensing?\u003c\/li\u003e\n\u003cli\u003eCamera assist (ultra fast autofocus and depth of field)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"include\"\u003e\u003cstrong\u003ePart List:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x ToF Unit\u003c\/li\u003e\n\u003cli\u003e1x Grove Cable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"M5Stack","offers":[{"title":"Default Title","offer_id":42291114115263,"sku":"MLE03350","price":600.0,"currency_code":"PHP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0531\/3419\/6927\/files\/MLE03350.jpg?v=1745916077"},{"product_id":"watering-unit-with-moisture-sensor-and-pump","title":"M5Stack Watering Unit with Moisture Sensor and Pump","description":"\u003ch2\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWatering unit\u003c\/strong\u003e\u003cspan\u003e is a capacitive soil moisture detection and adjustment unit designed for intelligent plant breeding scenarios. It combines a water pump with measuring plates for soil moisture detection and water control. This product enables easy humidity detection and irrigation control for plants.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe unit utilizes capacitive soil moisture detection technology. The measurement electrode plate is designed in a capacitive manner, which offers advantages over resistive electrode plates. Capacitive designs are more effective in preventing electrode plate corrosion during actual use. This helps ensure the longevity and accuracy of the soil moisture detection capability.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe Watering unit integrates a water pump, allowing for automatic irrigation control based on the detected soil moisture levels. By measuring the capacitance of the soil through the electrode plates, the unit can determine the moisture content in the soil. When the moisture level falls below a certain threshold, the water pump is activated to provide irrigation and maintain optimal soil moisture for plant growth.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThis capacitive soil moisture detection and adjustment unit is particularly useful in intelligent plant breeding scenarios. It enables automated monitoring and control of soil moisture levels, ensuring plants receive appropriate irrigation based on their specific needs. This helps promote healthy plant growth and efficient water usage.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 id=\"product-features\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCapacitive measuring plate (corrosion resistant)\u003c\/li\u003e\n\u003cli\u003eIntegrated 5W power water pump\u003c\/li\u003e\n\u003cli\u003eLEGO compatible holes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Code: \u003c\/strong\u003eU101\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePump power: \u003c\/strong\u003e5W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet Weight:\u003c\/strong\u003e 78g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGross Weight:\u003c\/strong\u003e 103g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Size:\u003c\/strong\u003e 192.5*24*33mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Size: \u003c\/strong\u003e200*35*45mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"application\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePlant cultivation\u003c\/li\u003e\n\u003cli\u003eSoil moisture detection\u003c\/li\u003e\n\u003cli\u003eSmart irrigation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"includes\"\u003e\u003cstrong\u003ePart List:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Watering Unit\u003c\/li\u003e\n\u003cli\u003e2x suction pipe\u003c\/li\u003e\n\u003cli\u003e1x HY2.0-4P cable\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"M5Stack","offers":[{"title":"Default Title","offer_id":42291114377407,"sku":"MLE03354","price":800.0,"currency_code":"PHP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0531\/3419\/6927\/files\/MLE03354.jpg?v=1746762683"},{"product_id":"finger-print-sensor-unit-fpc1020a","title":"M5Stack Finger Print Unit (FPC1020A)","description":"\u003ch2\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eFINGER\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eis a fingerprint recognition sensor designed to provide reliable and convenient biometric fingerprint recognition capabilities. It features the integrated FPC1020A capacitive fingerprint recognition module, which enables functions such as multi-fingerprint enrollment, image processing, feature extraction, fingerprint matching, and searching.\u003cbr\u003e\u003cbr\u003eUtilizing the UART communication protocol, FINGER ensures secure and efficient data transmission. Its compact design and low-power operation make it suitable for various projects, offering both reliable security levels and optimal user convenience. If you are looking to incorporate biometric fingerprint recognition into your project and require a stable and dependable mechanism for enrollment, verification, and management, FINGER Unit provides an excellent solution.\u003cbr\u003e\u003cbr\u003eTo use FINGER, simply connect it to PORT C, and it will communicate with the M5Core device via UART protocol.\u003c\/p\u003e\n\u003cp\u003eUART settings:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBaudrate(\u003cstrong\u003edefault: 19200bps\u003c\/strong\u003e)\u003c\/li\u003e\n\u003cli\u003eStart bits(1 bit)\u003c\/li\u003e\n\u003cli\u003eStop bits(1 bit)\u003c\/li\u003e\n\u003cli\u003eParity(no)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"product-features\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eUse capacitive area array semiconductor fingerprint sensor\u003c\/li\u003e\n\u003cli\u003eEach pixel of the sensor has a pixel quality of 256 gray levels\u003c\/li\u003e\n\u003cli\u003e1: N recognition and 1: 1 verification function\u003c\/li\u003e\n\u003cli\u003eSupport finger 360 rotation recognition\u003c\/li\u003e\n\u003cli\u003eFingerprint comparison and search function\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Code: \u003c\/strong\u003eU008\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFingerprint capacity:\u003c\/strong\u003e 150\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecurity level:\u003c\/strong\u003e 0-9, default 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput format:\u003c\/strong\u003e User name, image, feature value\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCharacteristic value size:\u003c\/strong\u003e 193Byte\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommunication method:\u003c\/strong\u003e UART (9600-115200)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking temperature:\u003c\/strong\u003e -10 °C-60 °C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelative humidity:\u003c\/strong\u003e 20% -80%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet weight:\u003c\/strong\u003e 7g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGross weight:\u003c\/strong\u003e 20g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Size:\u003c\/strong\u003e 48*24*8mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Size:\u003c\/strong\u003e 67*53*12mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"applications\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFingerprint Attendance Machine\u003c\/li\u003e\n\u003cli\u003eFingerprint Locker\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"include\"\u003e\u003cstrong\u003ePart List:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x FINGER Unit\u003c\/li\u003e\n\u003cli\u003e1x Grove Cable\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"M5Stack","offers":[{"title":"Default Title","offer_id":42291115294911,"sku":"MLE03355","price":1600.0,"currency_code":"PHP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0531\/3419\/6927\/files\/MLE03355.jpg?v=1745994082"},{"product_id":"mini-3a-relay-unit","title":"M5Stack Mini 3A Relay Unit","description":"\u003ch2\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eRELAY\u003c\/strong\u003e\u003cspan\u003e is a relay unit that allows you to control the on\/off state of circuits operating at the DC\/3A-30V or AC\/3A-220V levels. It functions as an automatic switch, where a small current controls the operation of a larger current. In electrical circuits, relays play a role in automatic regulation, safety protection, and circuit switching.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe RELAY unit provides three pins: ON, OFF, and COM. By programming the GPIO (General Purpose Input\/Output) pins of your microcontroller or device to output high or low voltage levels, you can control the relay. The common terminal, COM, is connected to either the ON or OFF terminal to control the circuit's state.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eRELAY units are commonly used in applications where there is a need to control higher power loads or switch between different electrical systems. By using the RELAY unit, you can automate the control of circuits and ensure the safety and efficiency of your electrical projects.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 id=\"product-features\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSingle-BUS control\u003c\/li\u003e\n\u003cli\u003eUp to 3A @ 30 V DC or 220 V AC\u003c\/li\u003e\n\u003cli\u003eSoftware Development Platform: Arduino, UIFlow (Blockly, Python)\u003c\/li\u003e\n\u003cli\u003eTwo Lego-compatible holes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eSpecifications:\u003cbr\u003e\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Code: \u003c\/strong\u003eU023\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet weight: \u003c\/strong\u003e12g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGross weight: \u003c\/strong\u003e26g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Size:\u003c\/strong\u003e 48*24*21mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Size: \u003c\/strong\u003e60*57*17mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"applications\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRemote control of high-power appliances, such as refrigerators, air conditioners, TVs, etc.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"include\"\u003e\u003cstrong\u003ePart List: \u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x RELAY Unit\u003c\/li\u003e\n\u003cli\u003e1x Grove Cable\u003c\/li\u003e\n\u003cli\u003e1x 3.96 socket\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"M5Stack","offers":[{"title":"Default Title","offer_id":42291115819199,"sku":"MLE03358","price":250.0,"currency_code":"PHP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0531\/3419\/6927\/files\/MLE03358_2.jpg?v=1746690284"},{"product_id":"mini-infrared-emitter-receiver-unit","title":"M5Stack Mini Infrared Distance Unit","description":"\u003ch2\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eIR Unit\u003c\/strong\u003e\u003cspan\u003e is an infrared photodiode unit that integrates both an infrared transmitter and receiver. It is designed to be connected to the M5Stack controllers through the HY2.0-4P interface for controlling infrared transmission and reception. The unit supports infrared encoding and decoding.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eDue to its reliable short-range transmission capabilities, infrared remote control is widely used in everyday life for controlling home appliances and consumer electronics. The IR unit enables seamless integration with the M5Core, allowing you to incorporate infrared functionality into your projects and interact with a variety of devices using infrared technology.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 id=\"product-features\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x infrared emitter(wavelength?940nm)\u003c\/li\u003e\n\u003cli\u003e1x infrared receiver\u003c\/li\u003e\n\u003cli\u003eDistance range: \u0026lt; 5m\u003c\/li\u003e\n\u003cli\u003eSoftware Development Platform: Arduino, UIFlow(Blockly,Python)\u003c\/li\u003e\n\u003cli\u003eTwo Lego-compatible holes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Code: \u003c\/strong\u003eU002\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInfrared emitter wavelength:\u003c\/strong\u003e 940nm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet weight: \u003c\/strong\u003e4g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGross weight: \u003c\/strong\u003e17g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Size: \u003c\/strong\u003e32*24*8mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Size:\u003c\/strong\u003e 67*53*12mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"include\"\u003e\u003cstrong\u003ePart List:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x IR Unit\u003c\/li\u003e\n\u003cli\u003e1x Grove Cable\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"M5Stack","offers":[{"title":"Default Title","offer_id":42291116409023,"sku":"MLE03357","price":300.0,"currency_code":"PHP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0531\/3419\/6927\/files\/MLE03357.jpg?v=1746668840"},{"product_id":"oled-unit-1-3-128-x-64-display","title":"M5Stack OLED Unit 1.3\" 128x64 Display","description":"\u003ch2\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eUnit OLED\u003c\/strong\u003e is a 1.3-inch OLED expansion screen unit. It adopts SH1107 drive scheme, supports black\/white display, and the resolution is 128*64. The driver chip selects the I2C communication interface, and the user can mount it to the I2C bus of the existing device when in use, which saves IO. The back of the screen is integrated with a magnetic design, which can easily be fixed on the metal surface by adsorption. The OLED screen extension is suitable for being embedded in various instruments or control devices that need to display simple content as a display panel.\u003c\/p\u003e\n\u003ch2 id=\"product-features\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOLED display panel\u003c\/li\u003e\n\u003cli\u003eSH1107 drive scheme\u003c\/li\u003e\n\u003cli\u003eDisplay color: black\/white\u003c\/li\u003e\n\u003cli\u003eI2C communication interface\u003c\/li\u003e\n\u003cli\u003e128*64 resolution\u003c\/li\u003e\n\u003cli\u003eViewing angle: full viewing angle\u003c\/li\u003e\n\u003cli\u003eMagnetic back design\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Code: \u003c\/strong\u003eU119\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking current: \u003c\/strong\u003e58mA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommunication protocol: \u003c\/strong\u003eI2C address: 0x3C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplay size: \u003c\/strong\u003e14.7 × 29.42（mm）\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePixel pitch:\u003c\/strong\u003e 0.17×0.17（mm）\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePixel size:\u003c\/strong\u003e 0.15×0.15（mm）\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eViewable:\u003c\/strong\u003e Full view\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating temperature:\u003c\/strong\u003e 0°C to 60°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet weight:\u003c\/strong\u003e 9.3g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGross weight:\u003c\/strong\u003e 20g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Size:\u003c\/strong\u003e 24*56*8mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Size:\u003c\/strong\u003e 67*53*12mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCase material:\u003c\/strong\u003e Plastic ( PC )\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"applications\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eInformation display\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"include\"\u003e\u003cstrong\u003ePart List:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Unit OLED\u003c\/li\u003e\n\u003cli\u003e1x HY2.0-4P Cable\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"M5Stack","offers":[{"title":"Default Title","offer_id":42291117588671,"sku":"MLE03364","price":750.0,"currency_code":"PHP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0531\/3419\/6927\/files\/MLE03364.jpg?v=1745975459"},{"product_id":"unit-gesture-recognition-sensor-paj7620u2","title":"M5Stack Gesture Unit (PAJ7620U2)","description":"\u003ch2\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eGesture Unit\u003c\/strong\u003e\u003cspan\u003e is a touchless 3D gesture recognition sensor that utilizes the I2C interface and integrates with the PAJ7620U2 chip. It enables the detection and recognition of various gestures without the need for physical touch.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eBy default, Gesture Unit includes a program that supports 9 different types of gesture recognition. These gestures provide an intuitive and engaging user experience. Moreover, the sensor can be programmed to recognize more complex gestures according to specific application requirements.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eGesture Unit boasts a high recognition rate of up to 240Hz, ensuring quick and accurate gesture detection. It also exhibits strong anti-interference capabilities, allowing it to function reliably even in environments with potential sources of interference. One of the notable advantages of this sensor is its low power consumption. With an operating current of only 2.2mA, it is energy-efficient and suitable for power-sensitive applications. This makes it an ideal choice for controlling robots based on hand movements, enabling interactive and responsive interactions.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eGesture Unit finds particular utility in interactive applications where touchless gesture recognition is desired. Its reliable recognition process, intuitive operation, and low power consumption make it a valuable component for creating immersive user experiences and enabling gesture-based control in various contexts.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ccode\u003eSupport 9 gestures:\u003c\/code\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ccode\u003eUp\u003c\/code\u003e, \u003ccode\u003eDown\u003c\/code\u003e, \u003ccode\u003eLeft\u003c\/code\u003e, \u003ccode\u003eRight\u003c\/code\u003e, \u003ccode\u003eFront\u003c\/code\u003e, \u003ccode\u003eBack\u003c\/code\u003e, \u003ccode\u003eClockwise\u003c\/code\u003e, \u003ccode\u003eCounterclockwise\u003c\/code\u003e, \u003ccode\u003eQuick wave\u003c\/code\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"product-features\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePAJ7620U2 gesture sensor \/ I2C interface\u003c\/li\u003e\n\u003cli\u003eRecognizable gestures up to 9 kinds\u003c\/li\u003e\n\u003cli\u003eFaster, more accurate.\u003c\/li\u003e\n\u003cli\u003eSupport for customizing and adding recognition gesture combinations (support developing)\u003c\/li\u003e\n\u003cli\u003eEffective recognition distance: 5cm-15cm\u003c\/li\u003e\n\u003cli\u003eEmbedded infrared LED and optical lens, be able to work in low-light even dark environment\u003c\/li\u003e\n\u003cli\u003eDevelopment Platform:\n\u003cul\u003e\n\u003cli\u003eArduino, UIFlow\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Code: \u003c\/strong\u003eU127\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGesture recognition frequency:\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e \u003c\/strong\u003eTypical value: 120Hz, maximum 240Hz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupport gestures: \u003c\/strong\u003e9 built-in + 4 software extensions + support software algorithm expansion\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEffective recognition distance: \u003c\/strong\u003e5cm-15cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eR Ambient light immunity: \u003c\/strong\u003e\u0026lt;100k Lux\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommunication interface: \u003c\/strong\u003eI2C, addr: 0x73\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking current: \u003c\/strong\u003e2.2mA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet weight: \u003c\/strong\u003e4.3g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGross weight: \u003c\/strong\u003e16.4g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct size: \u003c\/strong\u003e24 * 32 * 8mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePacking size: \u003c\/strong\u003e67 * 53 * 12mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"applications\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTouchless remote control\u003c\/li\u003e\n\u003cli\u003eRobot interaction\u003c\/li\u003e\n\u003cli\u003eHuman-Computer Interaction\u003c\/li\u003e\n\u003cli\u003eGesture light control\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"includes\"\u003e\u003cstrong\u003ePart List:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x UNIT Gesture\u003c\/li\u003e\n\u003cli\u003e1x HY2.0-4P Cable\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"M5Stack","offers":[{"title":"Default Title","offer_id":42291117752511,"sku":"MLE03365","price":900.0,"currency_code":"PHP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0531\/3419\/6927\/files\/MLE03365.jpg?v=1746769770"},{"product_id":"light-sensor-unit-with-photo-resistance","title":"M5Stack Light Sensor Unit with Photo-resistance","description":"\u003ch2\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eLIGHT Unit\u003c\/strong\u003e\u003cspan\u003e is a light intensity detection sensor that integrates a photoresistor and a 10K adjustable resistor. It is capable of detecting light intensity and setting a threshold value for light intensity. The resistance of the photoresistor decreases as the incident light intensity increases. By detecting the voltage change, the sensor obtains light intensity data through analog-to-digital conversion.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eTo achieve more accurate light intensity detection, this unit also incorporates an LM393 dual differential comparator. It is used to compare the differential voltage between the photoresistor and the pressure-sensitive resistor.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 id=\"product-features\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e10K adjustable resistor\u003c\/li\u003e\n\u003cli\u003eSoftware Development Platform: Arduino, UIFlow(Blocky,Python)\u003c\/li\u003e\n\u003cli\u003eTwo Lego-compatible holes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable resistance: \u003c\/strong\u003e10K\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet weight:\u003c\/strong\u003e 4g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGross weight:\u003c\/strong\u003e 17g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Code: \u003c\/strong\u003eU021\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Size:\u003c\/strong\u003e 32*24*8*mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Size:\u003c\/strong\u003e 67*53*12mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"include\"\u003e\u003cstrong\u003ePart List:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x LIGHT Unit\u003c\/li\u003e\n\u003cli\u003e1x Grove Cable\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"M5Stack","offers":[{"title":"Default Title","offer_id":42291118244031,"sku":"MLE03367","price":250.0,"currency_code":"PHP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0531\/3419\/6927\/files\/MLE03367_3.jpg?v=1745995955"},{"product_id":"1-to-3-hub-expansion-unit","title":"M5Stack 1 to 3 HUB Unit","description":"\u003ch2\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eHUB\u003c\/strong\u003e is a unit that is used in order to expand the GROVE ports over the M5Stack device. For example, if we want sensors with different I2C addresses or output to 3 devices at the same time. (M5Stack device usually can output one device at a time to to limited amount of grove ports)\u003c\/p\u003e\n\u003cp\u003eNotice: \u003cstrong\u003eHUB\u003c\/strong\u003e is just a hardware expander, if you are looking for hardware and software (standard protocol) expander like I2C, Single-bus, please check \u003cstrong\u003ePaHUB\u003c\/strong\u003e or \u003cstrong\u003ePbHUB\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eIf you are connecting two I2C slave devices onto \u003cstrong\u003eHUB\u003c\/strong\u003e that share the same address, you will have problem getting I2C data from both. The I2C addresses of the devices must be different, they can be changed manually by changing the resistor values.\u003c\/p\u003e\n\u003ch2 id=\"product-features\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eGROVE Expander\u003c\/li\u003e\n\u003cli\u003eTwo Lego-compatible holes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Code: \u003c\/strong\u003eU006\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet weight:\u003c\/strong\u003e 5g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGross weight:\u003c\/strong\u003e 17g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Size:\u003c\/strong\u003e 32*24*12mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Size: \u003c\/strong\u003e67*53*12mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"includes\"\u003e\u003cstrong\u003ePart List:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x HUB Unit\u003c\/li\u003e\n\u003cli\u003e1x Grove Cable\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"M5Stack","offers":[{"title":"Default Title","offer_id":42291118702783,"sku":"MLE03370","price":250.0,"currency_code":"PHP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0531\/3419\/6927\/files\/MLE03370_2.jpg?v=1746692868"},{"product_id":"esp32-psram-timer-camera-x-ov3660","title":"M5Stack ESP32 PSRAM Timer Camera X (OV3660)","description":"\u003ch2\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eTimer Camera X\u003c\/strong\u003e is a camera module based on ESP32, integrated with ESP32 chip and 8M-PSRAM. The camera (ov3660) with 3 million pixels , DFOV 66.5 ° and shoot 2048x1536 resolution photo, built-in 140mAh battery and LED status indicator, featuring ultra-low power consumption design. There is a reset button under the LED. Through RTC (BM8563), timing sleep and wake-up can be realized. The standby current is only 2?A. After timing photo taking function(one photo per hour) is turned on, the battery can work continuously for more than one month. The module supports WiFi image transmission and USB port debugging. The bottom HY2.0-4P port output can be connected to other peripherals. Through M5Burner burning firmware, Timer Camera X can be set directly with Camera-Tool, and Timer Camera X data can be processed in UIFlow.\u003c\/p\u003e\n\u003cp\u003eThe low-power power management solution adopted by the Timer Camera series is different from the CORE and StickC devices. When in use, the PWR button is used as a power-on button(long press 2s). If you need to shut down the device, you need to use the software API or press the Reset button on the PCB.When using external power supply, the device will remain powered on.\u003c\/p\u003e\n\u003cp\u003e\u003cimg width=\"400px\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0531\/3419\/6927\/files\/timercamera_x_reset.webp\" class=\"lazypreload\"\u003e\u003c\/p\u003e\n\u003ch2 id=\"product-features\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDesign based on esp32\u003c\/li\u003e\n\u003cli\u003eWiFi image transmission\u003c\/li\u003e\n\u003cli\u003eTimed sleep wake up\u003c\/li\u003e\n\u003cli\u003eStatus indicator\u003c\/li\u003e\n\u003cli\u003eUltra low power design\u003c\/li\u003e\n\u003cli\u003eBuilt-in 140mAh battery\u003c\/li\u003e\n\u003cli\u003eProgramming platform?ESP-IDF\/Arduino\/UIFlow\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Code: \u003c\/strong\u003eU082-X\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePSRAM: \u003c\/strong\u003e8MB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlash: \u003c\/strong\u003e4M\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImage Sensor:\u003c\/strong\u003e OV3660\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum resolution:\u003c\/strong\u003e 3M pixels\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput format:\u003c\/strong\u003e 8-\/10-Bit RAW, RGB and YCbCr output, compression.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDFOV:\u003c\/strong\u003e 66.5°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery: \u003c\/strong\u003e140mAh\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet weight:\u003c\/strong\u003e 15g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGross weight:\u003c\/strong\u003e 39g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Size:\u003c\/strong\u003e 48*24*15mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Size:\u003c\/strong\u003e 75*45*30mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"applications\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTake pictures regularly\u003c\/li\u003e\n\u003cli\u003eRemote video monitoring\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"includes\"\u003e\u003cstrong\u003ePart List:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Timer Camera X\u003c\/li\u003e\n\u003cli\u003e1x LEGO Adapter\u003c\/li\u003e\n\u003cli\u003e1x Wall-1515\u003c\/li\u003e\n\u003cli\u003e1x Type-C USB(20cm)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"driver-installation\"\u003e\u003cstrong\u003eDriver Installation: \u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eTimerCAM may not work without drive in some systems. Users can manually install \u003ca rel=\"noopener\" href=\"https:\/\/ftdichip.com\/drivers\/vcp-drivers\/\" target=\"_blank\"\u003eFTDI Driver \u003c\/a\u003eto fix this problem. Take the win10 environment as an example, download the driver file that matches the operating system, unzip it, and install it through the device manager. (Note: In some system environments, the driver needs to be installed twice for the driver to take effect. The unrecognized device name is usually \u003ccode\u003eM5Stack\u003c\/code\u003e or \u003ccode\u003eUSB Serial\u003c\/code\u003e. Windows recommends using the driver file to install directly in the device manager (custom Update), the executable file installation method may not work properly).\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"product_pic\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0531\/3419\/6927\/files\/ftdi_01.webp\" class=\"lazypreload\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0531\/3419\/6927\/files\/ftdi_02.webp\" class=\"lazypreload\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0531\/3419\/6927\/files\/ftdi_03.webp\" class=\"lazypreload\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"M5Stack","offers":[{"title":"Default Title","offer_id":42291118997695,"sku":"MLE03371","price":1250.0,"currency_code":"PHP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0531\/3419\/6927\/files\/MLE03371.jpg?v=1745916585"},{"product_id":"unit-cam-wi-fi-camera-ov2640","title":"M5Stack Unit Cam Wi-fi Camera (OV2640)","description":"\u003ch2\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eUnit CAM\u003c\/strong\u003e \u003cstrong\u003eM5 \u003c\/strong\u003elaunched a very cost-effective WiFi camera, using ESP32-WROOM-32E control core + 2MegaPixel image sensor (OV2640) solution on the hardware, using the most simplified design, no extra peripherals. The factory software integrates image transmission firmware, provides image data acquisition, image parameter (white balance, exposure, gain, size and other attributes) adjustment interface, users can directly acquire image data through UART or WiFi, and interact with the camera. Support UIFlow graphical programming call, realize zero development, out-of-the-box user experience. The compact design and cost performance are suitable for various wireless camera application scenarios.\u003c\/p\u003e\n\u003ch2 id=\"product-features\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSimplified design\u003c\/li\u003e\n\u003cli\u003eESP32 control core\u003c\/li\u003e\n\u003cli\u003e2MegaPixel camera (OV2640)\u003c\/li\u003e\n\u003cli\u003eUART communication (support image data acquisition, image parameter adjustment and other interfaces)\u003c\/li\u003e\n\u003cli\u003eWIFI image transmission\u003c\/li\u003e\n\u003cli\u003eProgramming platform: ESP-IDF\/Arduino\/UIFlow\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Code: \u003c\/strong\u003eU109\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlash:\u003c\/strong\u003e 4M\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFirmware default communication method:\u003c\/strong\u003e UART: 115200bps 8N1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamera:\u003c\/strong\u003e OV2640\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum resolution:\u003c\/strong\u003e 2MegaPixel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnit CAM firmware default picture transfer rate:\u003c\/strong\u003e 12fps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOV2640 supports output format:\u003c\/strong\u003e YUV(422\/420)\/YCbCr422, 8-bit compressed data, RGB565\/555, 8-\/10-bit Raw RGB data\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDFOV:\u003c\/strong\u003e 66.5°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet weight:\u003c\/strong\u003e 4.7g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGross weight:\u003c\/strong\u003e 5.3g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Size:\u003c\/strong\u003e 45*20*12mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Size:\u003c\/strong\u003e 60*60*15mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"applications\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWiFi camera\u003c\/li\u003e\n\u003cli\u003eRemote monitoring\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"include\"\u003e\u003cstrong\u003ePart List:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Unit CAM\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"M5Stack","offers":[{"title":"Default Title","offer_id":42291119259839,"sku":"MLE03374","price":550.0,"currency_code":"PHP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0531\/3419\/6927\/files\/MLE03374.jpg?v=1745989688"},{"product_id":"m5stack-poe-camera-w-o-wi-fi-ov2640","title":"M5Stack PoE Camera w\/o Wi-Fi","description":"\u003ch2\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePoECAM-W\u003c\/strong\u003e is an open source fully programmable camera integrating PoE (Power Over Ethernet) and Wi-Fi. This item is ESP32 based webcam with W5500 embedded Ethernet controller, plus 2M pixel image sensor OV2640. Poe camera-W is equipped with a combination of 8MB PSRAM + 16MB Flash large memory. This teeny tiny with flexible power supply, you can get stable image by connecting the network cable in just 2 steps. It's wonderful for you to monitor warehouse, auto image acquisition, etc.\u003c\/p\u003e\n\u003ch2\u003e\n\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\n\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBuilt-in ESP32 MCU（support WIFI）\u003c\/li\u003e\n\u003cli\u003e2 million pixel camera 0V2640\u003c\/li\u003e\n\u003cli\u003eEthernet chip W5500\u003c\/li\u003e\n\u003cli\u003eLAN speeds up to 10M or 100M (depending on the line provided)\u003c\/li\u003e\n\u003cli\u003ePoE IEEE802.3 AF specification（Maximum power 6W）\u003c\/li\u003e\n\u003cli\u003eBuilt-in prompt LED light\u003c\/li\u003e\n\u003cli\u003eDevelopment platform:Arduino、ESP-IDF\u003c\/li\u003e\n\u003cli\u003eEthernet standard interface RJ45\u003c\/li\u003e\n\u003cli\u003eStandard LEGO interface and camera mount\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n\u003cbr\u003e\u003cstrong\u003eSpecification:\u003c\/strong\u003e\n\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMCU:\u003c\/strong\u003e ESP32-D0WDQ6-V3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamera Module:\u003c\/strong\u003e OV2640\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEthernet Chip: \u003c\/strong\u003eW5500\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFLASH: \u003c\/strong\u003e16MB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePSRAM: \u003c\/strong\u003e8MB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePixel Size: \u003c\/strong\u003e2.2 µm x 2.2 µm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic image control functions:\u003c\/strong\u003e Automatic Exposure Control (AEC), Automatic Gain Control (AGC), Automatic White Balance (AWB), Automatic Band Filter (ABF), and Automatic Black-Level Calibration (ABLC)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupports Hardwired TCP\/IP Protocols: \u003c\/strong\u003eTCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDFOV:\u003c\/strong\u003e 65°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput Formats（8-bit):  \u003c\/strong\u003e\u003cbr\u003e  • YUV(422\/420)\/YCbCr422 \u003cbr\u003e  • RGB565\/555 \u003cbr\u003e  • 8-bit compressed data \u003cbr\u003e  • 8-\/10-bit Raw RGB data\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEthernet interface specifications:\u003c\/strong\u003e RJ45\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMAXIMUM POWER:\u003c\/strong\u003e 6W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Size: \u003c\/strong\u003e64mm × 24mm × 18mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Size: \u003c\/strong\u003e80mm × 37mm × 32mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Weight:\u003c\/strong\u003e 38g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Weight:\u003c\/strong\u003e 45g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n\u003cstrong\u003e\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/h2\u003e\n\u003ch2\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWarehouse monitoring\u003c\/li\u003e\n\u003cli\u003eTimed photograph\u003c\/li\u003e\n\u003cli\u003eMachine vision\u003c\/li\u003e\n\u003cli\u003eSmart home monitoring\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n\u003cbr\u003e\u003cstrong\u003ePart List:\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 x PoECAM-W\u003c\/li\u003e\n\u003cli\u003e1 x Camera mount clip\u003c\/li\u003e\n\u003cli\u003e1x Brick compatible clip\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"M5Stack","offers":[{"title":"Default Title","offer_id":42291119653055,"sku":"MLE03373","price":2790.0,"currency_code":"PHP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0531\/3419\/6927\/files\/MLE03373_1.jpg?v=1745460788"},{"product_id":"m5stack-unitv2-the-standalone-ai-camera-for-edge-computing-ssd202d-tinyml","title":"M5Stack UnitV2 AI Camera","description":"\u003ch2\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eUnitV2 is a high-efficiency AI recognition module launched by M5Stack, using Sigmstar SSD202D (integrated dual-core Cortex-A7 1.2Ghz processor) control core, integrated 128MB-DDR3 memory, 512MB NAND Flash, and 1080P camera. With embedded Linux operating system and rich software and hardware resources and development tools integrated, UnitV2 is committed to bringing users a simple and efficient AI development experience out of the box.\u003c\/p\u003e\n\u003ch2 id=\"product-features\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSigmstar SSD202D\u003c\/li\u003e\n\u003cli\u003eDual Cortex-A7 1.2Ghz Processor\u003c\/li\u003e\n\u003cli\u003e128MB DDR3\u003c\/li\u003e\n\u003cli\u003e512MB NAND Flash\u003c\/li\u003e\n\u003cli\u003eGC2145 1080P Colored Sensor\u003c\/li\u003e\n\u003cli\u003eMicrophone\u003c\/li\u003e\n\u003cli\u003eWiFi 2.4GHz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct code: \u003c\/strong\u003eU078-D\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSigmstar SSD202D: \u003c\/strong\u003eDual Cortex-A7 1.2GHz Processor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlash: \u003c\/strong\u003e512MB NAND\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRAM: \u003c\/strong\u003e128MB-DDR3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamera: \u003c\/strong\u003eGC2145 1080P Colored Sensor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens: \u003c\/strong\u003eFOV 68° , DOF= 60cm- ∞\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Input: \u003c\/strong\u003e5V @ 500mA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePeripherals: \u003c\/strong\u003eTypeC x1, UART x1, TFCard x1, Button x1, Microphone x1, Fan x1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndicator light: \u003c\/strong\u003eRed, White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWi-Fi: \u003c\/strong\u003e150Mbps 2.4GHz 802.11 b\/g\/n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Temperature: \u003c\/strong\u003e0°C to 60°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet weight: \u003c\/strong\u003e18g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Size: \u003c\/strong\u003e48*18.5*24mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Size: \u003c\/strong\u003e157*38*38mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCase Material: \u003c\/strong\u003ePlastic ( PC )\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"applications\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAI recognition function development\u003c\/li\u003e\n\u003cli\u003eIndustrial visual identification sorting\u003c\/li\u003e\n\u003cli\u003eMachine vision learning\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"include\"\u003e\u003cstrong\u003ePart List:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 x M5Stack UnitV2\u003c\/li\u003e\n\u003cli\u003e1 x 16g TF Card\u003c\/li\u003e\n\u003cli\u003e1 x USB-C Cabel (50cm)\u003c\/li\u003e\n\u003cli\u003e1 x Stand\u003c\/li\u003e\n\u003cli\u003e1 x Back Brick\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan class=\"product_pic\"\u003e\u003cimg class=\"lazypreload\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0531\/3419\/6927\/files\/unitv2_04.webp\"\u003e\u003cimg class=\"lazypreload\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0531\/3419\/6927\/files\/unitv2_05.webp\"\u003e\u003cimg class=\"lazypreload\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0531\/3419\/6927\/files\/unitv2_06.webp\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"M5Stack","offers":[{"title":"Default Title","offer_id":42291120242879,"sku":"MLE03372","price":5050.0,"currency_code":"PHP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0531\/3419\/6927\/files\/MLE03372.jpg?v=1745829853"},{"product_id":"2-54mm-mini-proto-unit-70-holes","title":"M5Stack 2.54mm Mini Proto Unit 70 Holes","description":"\u003ch2\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePROTO Unit\u003c\/strong\u003e\u003cspan\u003e is an incredibly versatile development board that empowers you with the freedom to design and implement circuits according to your specific needs. With its HY2.0-4P port, you can seamlessly connect the PROTO Unit to the main M5Stack device, enabling seamless integration into your projects.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eDesigned to facilitate circuit prototyping and expansion, the PROTO Unit is an ideal choice for those looking to enhance their designs with additional circuitry while ensuring reliable performance and protection. Its spacious layout and well-thought-out design provide ample room for circuit experimentation, allowing you to bring your creative ideas to life.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eFurthermore, PROTO Unit offers compatibility with various sensors, modules, and components, enabling you to explore a wide range of possibilities in your projects. Its flexible and user-friendly interface makes it easy to integrate with other M5Stack units or third-party devices, unlocking endless opportunities for innovation.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 id=\"product-features\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHole Size: 0.039\" 1mm (CNC Drilled)\u003c\/li\u003e\n\u003cli\u003eHole Pitch: 0.1 in - (2.54 mm)\u003c\/li\u003e\n\u003cli\u003eEntire Hole Quantity: 70 Holes\u003c\/li\u003e\n\u003cli\u003eTwo Lego-compatible holes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Code: \u003c\/strong\u003eU022\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet weight: \u003c\/strong\u003e5g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGross weight: \u003c\/strong\u003e17g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Size: \u003c\/strong\u003e48*24*8mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Size: \u003c\/strong\u003e67*53*12mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"include\"\u003e\u003cstrong\u003ePart List:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x PROTO unit\u003c\/li\u003e\n\u003cli\u003e1x GROVE Cable\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"M5Stack","offers":[{"title":"Default Title","offer_id":42291120373951,"sku":"MLE03377","price":140.0,"currency_code":"PHP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0531\/3419\/6927\/files\/MLE03377.jpg?v=1746771593"},{"product_id":"roverc-prow-o-m5stickc","title":"M5Stack RoverC Pro (w\/o M5StickC)","description":"\u003ch2\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eRoverC-Pro\u003c\/strong\u003e is a programmable Mecanum wheel omnidirectional mobile robot base. Compatible with M5StickC\/M5StickC PLUS, it can be initialised by just inserting M5StickC\/M5StickC PLUS. The main control chip is STM32F030C6T6, and it incorporates four N20 worm gear motors to drive the wheels directly by the motor driver.\u003c\/p\u003e\n\u003cp\u003eThe PRO version provides a gripping mechanism controlled by a servo for gripping objects. The base provides two dedicated servo control drivers. In addition, it also provides two Grove-compatible I2C connectors to facilitate the expansion of other modules. The base is compatible with Lego and can be expanded structurally. There is an 16340 (700mAh) battery on the back, from which the battery can be replaced. It can be recharged through M5StickC\/M5StickC PLUS. The power of the base is controlled by an independent switch.\u003c\/p\u003e\n\u003ch2 id=\"product-features\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eI2C Address 0x38\u003c\/li\u003e\n\u003cli\u003eRemote Control\u003c\/li\u003e\n\u003cli\u003eGripping mechanism\u003c\/li\u003e\n\u003cli\u003eProgrammable\u003c\/li\u003e\n\u003cli\u003eFour-channel motor driver\u003c\/li\u003e\n\u003cli\u003eLEGO compatible\u003c\/li\u003e\n\u003cli\u003eExtra Grove ports for expansion\u003c\/li\u003e\n\u003cli\u003eEquipped with 16340(700mAh) battery holder\u003c\/li\u003e\n\u003cli\u003eFlexible movement in all directions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Code: \u003c\/strong\u003eK036-B\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommunication protocol:\u003c\/strong\u003e I2C:0x38\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet weight: \u003c\/strong\u003e187g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGross weight:\u003c\/strong\u003e 245g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Size: \u003c\/strong\u003e120 x 75 x 58mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Size:\u003c\/strong\u003e 115 x 85 x 65mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"applications\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAutonomous Rover\u003c\/li\u003e\n\u003cli\u003eMini RC surveilance car\u003c\/li\u003e\n\u003cli\u003eSmart and cognitive toys\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"include\"\u003e\u003cstrong\u003ePart List:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x RoverC base(includes 16340(700mAh) Battery)\u003c\/li\u003e\n\u003cli\u003e1x Claw Kit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"M5Stack","offers":[{"title":"Default Title","offer_id":42291121455295,"sku":"MLE03375","price":4400.0,"currency_code":"PHP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0531\/3419\/6927\/files\/MLE03375.jpg?v=1745830939"},{"product_id":"m5stack-core2-esp32-iot-development-kit-for-aws-iot-edukit","title":"M5Stack Core2 for AWS ESP32 IoT Development Kit","description":"\u003ch2\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eCore2 for AWS\u003c\/strong\u003e is the reference hardware kit for AWS IoT EduKit – a prescriptive learning program from AWS which makes it easy and cost effective to learn how to build IoT applications using AWS services. It comes equipped with a Microchip ATECC608 \u003ca href=\"https:\/\/www.microchip.com\/design-centers\/security-ics\/trust-platform\/trust-go\" rel=\"noopener\" target=\"_blank\"\u003eTrust\u0026amp;GO \u003c\/a\u003epre-provisioned secure element, in addition to the existing features of the standard M5Stack Core2 and M5GO Bottom2. The Core2 for AWS is a feature rich, plug and play extensible, and secure hardware kit for learning and building a wide range of IoT applications.\u003c\/p\u003e\n\u003cp\u003eTo learn more about the \u003cstrong\u003eAWS IoT EduKit\u003c\/strong\u003e program, visit \u003ca href=\"https:\/\/edukit.workshop.aws\/\" rel=\"noopener\" target=\"_blank\"\u003ehttps:\/\/edukit.workshop.aws\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eThe Core2 for AWS comes with an ESP32-D0WDQ6-V3 microcontroller, which features dual Xtensa 32-bit LX6 cores and a main frequency up to 240Mhz, with 2.4GHz WiFi, Bluetooth v4.2 BR\/EDR, and BLE support. Comes with 8MB PSRAM and 16MB flash on board.\u003c\/p\u003e\n\u003cp\u003eThe main unit is equipped with a 2.0-inch capacitive touch screen that provides a smooth and responsive human machine interface. The built-in vibration motor can be used to provide haptic feedback or alerts. Onboard RTC module provides accurate time of day. Power is supplied through an AXP192 power management chip, to monitor and control power attributes of the device. The included TF card slot supports microSD cards up to 16GB. The on-board speaker is paired with an I2S digital audio interface power amplifier chip to reduce signal distortion and provide clearer audio output. There are independent physical power and reset (RST) buttons on the sides of Core2 for AWS, with 3 programmable touch buttons on the front of the screen.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe M5GO Bottom2 for AWS adds additional features and security for IoT applications. The MPU6886 provides 6-axis internal IMU and temperature, the SPM1423 digital microphone captures audio for recording or creating voice applications, 10 individually programmable RGB LEDs via SK6812 to create customized and animated light effects, a 500mAh lithium-ion battery provides power on the go, the onboard Microchip ATECC608 Trust\u0026amp;GO crypto-authentication chip is pre-provisioned with secure keys to simplify connectivity to AWS and accelerate cryptographic computation.The CP2104 chip interface is reserved on the PCB of Core2 for AWS to interface with the lithium battery.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor all questions or issue regarding this device, pls visit our forum: \u003ca href=\"https:\/\/forum.m5stack.com\/category\/41\/core2-for-aws\" rel=\"noopener\" target=\"_blank\"\u003ehttps:\/\/forum.m5stack.com\/category\/41\/core2-for-aws\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3 id=\"power-management\" style=\"padding-left: 40px;\"\u003ePower Management\u003c\/h3\u003e\n\u003cp class=\"tip\" style=\"padding-left: 40px;\"\u003e\u003cstrong\u003eOperations:\u003c\/strong\u003e\u003cbr\u003ePower on: One click the power button on the left\u003cbr\u003ePower off: Long press the left power button for 6 seconds\u003cbr\u003eReset: Click the RST button on the bottom side\u003ccode class=\"language-cpp hljs\"\u003e\n\u003c\/code\u003e\u003c\/p\u003e\n\u003ch2 id=\"product-feature\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eReference hardware kit for use with AWS IoT EduKit\u003c\/li\u003e\n\u003cli\u003eESP32-D0WDQ6-V3, supports 2.4GHz WiFi, Bluetooth 4.2, BLE\u003c\/li\u003e\n\u003cli\u003e16M Flash, 8M PSRAM\u003c\/li\u003e\n\u003cli\u003eBuilt-in ATECC608 hardware encryption chip\u003c\/li\u003e\n\u003cli\u003eCapacitive touch screen\u003c\/li\u003e\n\u003cli\u003eBuilt-in PDM microphone, power indicator, 6-Axis IMU, vibration motor, I2S codec, Amplifier, Speaker, RTC, power button, reset button, 10 x RGB LEDs\u003c\/li\u003e\n\u003cli\u003eTF card slot (support up to 16GB)\u003c\/li\u003e\n\u003cli\u003eBuilt-in 500mAh Lithium ion battery, equipped with power management chip\u003c\/li\u003e\n\u003cli\u003eSupports \u003ca href=\"https:\/\/aws.amazon.com\/freertos\" rel=\"noopener\" target=\"_blank\"\u003eFreeRTOS \u003c\/a\u003e, \u003ca href=\"http:\/\/micropython.org\/\" rel=\"noopener\" target=\"_blank\"\u003eMicroPython \u003c\/a\u003e, \u003ca href=\"http:\/\/flow.m5stack.com\/\" rel=\"noopener\" target=\"_blank\"\u003eUIFlow \u003c\/a\u003e, \u003ca href=\"http:\/\/www.arduino.cc\/\" rel=\"noopener\" target=\"_blank\"\u003eArduino \u003c\/a\u003edevelopment frameworks\u003c\/li\u003e\n\u003cli\u003eValidated through AWS Device Qualification Program\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Code: \u003c\/strong\u003eK010-AWS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eESP32-D0WDQ6-V3:\u003c\/strong\u003e 240MHz dual core, 600 DMIPS, 520KB SRAM, Wi-Fi\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlash: \u003c\/strong\u003e16MB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePSRAM: \u003c\/strong\u003e8MB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware encryption chip: \u003c\/strong\u003eATECC608B-TNGTLSU-G (addr 0x35)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput voltage: \u003c\/strong\u003e5V @ 500mA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHost interface: \u003c\/strong\u003eTypeC x1, POGO PIN x1, I2C x1, GPIO x1, UART x1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProgrammable LED light: \u003c\/strong\u003eSK6812*10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eButton:\u003c\/strong\u003e Power button, RST button, virtual screen button * 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVibration reminder:  \u003c\/strong\u003eVibration motor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIPS LCD screen: \u003c\/strong\u003e2.0\"@320*240 ILI9342C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacitive touch screen IC: \u003c\/strong\u003eFT6336U\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeaker: \u003c\/strong\u003e1W-0928\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMicrophone: \u003c\/strong\u003eSPM1423\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eI2S power amplifier: \u003c\/strong\u003eNS4168\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIMU: \u003c\/strong\u003eMPU6886\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRTC: \u003c\/strong\u003eBM8563\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePMU:\u003c\/strong\u003e AXP192\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB chip: \u003c\/strong\u003eCP2104\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDC-DC boost:\u003c\/strong\u003e SY7088\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTF card slot: \u003c\/strong\u003eSupport up to 16G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLithium battery: \u003c\/strong\u003e500mAh @ 3.7V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAntenna: \u003c\/strong\u003e2.4G 3D antenna\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking temperature: \u003c\/strong\u003e32°F to 104°F (0°C to 40°C )\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet weight: \u003c\/strong\u003e101g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGross weight: \u003c\/strong\u003e108g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct size: \u003c\/strong\u003e54 x 54 x 24mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage size: \u003c\/strong\u003e90 x 60 x 27mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShell material: \u003c\/strong\u003ePlastic (PC )\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"application\"\u003e\n\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eInternet of Things Controller\u003c\/li\u003e\n\u003cli\u003eSTEM Education\u003c\/li\u003e\n\u003cli\u003eDIY projects\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"include\"\u003e\u003cstrong\u003ePart List:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x M5Stack Core2\u003c\/li\u003e\n\u003cli\u003e1x M5GO Bottom2 for AWS\u003c\/li\u003e\n\u003cli\u003e1x Type-C USB (50cm)\u003c\/li\u003e\n\u003cli\u003e1x HEX KEY\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"M5Stack","offers":[{"title":"Default Title","offer_id":42291121782975,"sku":"MLE03378","price":4200.0,"currency_code":"PHP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0531\/3419\/6927\/files\/MLE03378.jpg?v=1746772536"},{"product_id":"m5stack-core2-iot-development-kit-k010","title":"M5Stack Core2 IoT Development Kit","description":"\u003ch2\u003e\u003cstrong\u003eDescription:\u003cbr\u003e\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eM5Core2\u003c\/strong\u003e is the second generation core device in the M5Stack development kit series, which further enhances the functions of the original generation of cores.\u003c\/p\u003e\n\u003cp\u003eThe MCU is an ESP32 model D0WDQ6-V3 and has dual core Xtensa® 32-bit 240Mhz LX6 processors that can be controlled separately. WiFi and Bluetooth are supported as standard and it includes an on board 16MB Flash and 8MB PSRAM, USB TYPE-C interface for charging, downloading of programs and serial communication, a 2.0-inch integrated capacitive touch screen, and a built-in vibration motor.\u003c\/p\u003e\n\u003cp\u003eM5Core2 also features a built-in RTC module which can provide accurate timing. The power supply is managed by an AXP192 power management chip, which can effectively control the power consumption of the base and a built-in green LED power indicator helps to notify the user of battery level. The battery capacity has been upgraded to 390mAh, which can power the core for much longer than the previous model.\u003c\/p\u003e\n\u003cp\u003eThe M5Core2 retains the TF-card(microSD) slot and speakers. However, in order to ensure higher quality sound output, the I2S digital audio interface power amplifier chip is used to effectively prevent signal distortion. There are independent power and reset buttons on the left side and bottom of the base.\u003c\/p\u003e\n\u003cp\u003eThe 3 icons on the front of the screen are capacitive buttons which are programmable. There is a small expansion board on the back of the base with a 6-axis IMU sensor and microphone. The development platform and programming language supported by M5Stack Core2: Arduino, \u003ca rel=\"noopener\" href=\"http:\/\/flow.m5stack.com\/\" target=\"_blank\"\u003eUIFlow \u003c\/a\u003e(using Blockly, MicroPython language) No matter what level of your development and programming skills, M5Stack will help You gradually turn your ideas into reality.\u003c\/p\u003e\n\u003ch2 id=\"product-features\"\u003e\u003cstrong\u003eFeatures: \u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eESP32-based, built-in Bluetooth,WiFi\u003c\/li\u003e\n\u003cli\u003e16M Flash,8M PSRAM\u003c\/li\u003e\n\u003cli\u003eBuilt-in speaker, power indicator, vibration motor, RTC, I2S amplifier, capacitive touch screen, power button, reset button\u003c\/li\u003e\n\u003cli\u003eTF card slot (16G Maximum size)\u003c\/li\u003e\n\u003cli\u003eBuilt-in lithium battery, equipped with power management chip\u003c\/li\u003e\n\u003cli\u003eIndependent small board built-in 6-axis IMU, PDM microphone\u003c\/li\u003e\n\u003cli\u003eM-Bus Socket \u0026amp; Pins\u003c\/li\u003e\n\u003cli\u003eProgram Platform: \u003ca rel=\"noopener\" href=\"http:\/\/flow.m5stack.com\/\" target=\"_blank\"\u003eUIFlow \u003c\/a\u003e, \u003ca rel=\"noopener\" href=\"http:\/\/micropython.org\/\" target=\"_blank\"\u003eMicroPython \u003c\/a\u003e, \u003ca rel=\"noopener\" href=\"http:\/\/www.arduino.cc\/\" target=\"_blank\"\u003eArduino\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct code: \u003c\/strong\u003eK010\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eESP32-D0WDQ6-V3:\u003c\/strong\u003e 240MHz dual core, 600 DMIPS, 520KB SRAM, Wi-Fi, Bluetooth\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlash:\u003c\/strong\u003e 16MB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePSRAM:\u003c\/strong\u003e 8MB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput Voltage:\u003c\/strong\u003e 5V @ 500mA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInterface:\u003c\/strong\u003e TypeC x 1, GROVE(I2C+I\/0+UART) x 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIPS LCD Screen: \u003c\/strong\u003e2.0\"@320*240 ILI9342C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTouch Screen: \u003c\/strong\u003eFT6336U\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeaker:\u003c\/strong\u003e 1W-092\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED:\u003c\/strong\u003e Green power indicator light\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eButton:\u003c\/strong\u003e Power button, RST button, Virtual screen button*3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVibration reminder:\u003c\/strong\u003e Vibration motor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMIC:\u003c\/strong\u003e SPM1423\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eI2S Power Amplifier:\u003c\/strong\u003e NS4168\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6-axis IMU:\u003c\/strong\u003e MPU6886\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRTC:\u003c\/strong\u003e BM8563\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePMU:\u003c\/strong\u003e AXP192\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB Chip:\u003c\/strong\u003e CP2104\/CH9102F (two chip versions, there is no difference in function and use)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDC-DC Boost:\u003c\/strong\u003e SY7088\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTF card slot:\u003c\/strong\u003e 16G Max\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLithium Battery:\u003c\/strong\u003e 390mAh @ 3.7V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAntenna:\u003c\/strong\u003e 2.4G 3D antenna\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating temperature:\u003c\/strong\u003e 0°C to 60°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase screw specifications:\u003c\/strong\u003e Hexagon socket countersunk head M3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternal PCB board reserved interface:   \u003c\/strong\u003e \n\u003cul\u003e\n\u003cli\u003eBattery interface (specification: 1.25mm-2P)\u003c\/li\u003e\n\u003cli\u003eUSB line interface (specification: 1.25mm-4P)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet Weight:\u003c\/strong\u003e 52g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGross Weight:\u003c\/strong\u003e 70g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Size:\u003c\/strong\u003e 54 x 54 x 16mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Size:\u003c\/strong\u003e 75 x 60 x 20mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCase Material:\u003c\/strong\u003e Plastic ( PC )\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"applications\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eInternet of things terminal controller\u003c\/li\u003e\n\u003cli\u003eStem education product\u003c\/li\u003e\n\u003cli\u003eDIY creation\u003c\/li\u003e\n\u003cli\u003eSmart home equipment\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"include\"\u003e\u003cstrong\u003ePart List:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x M5Stack Core2\u003c\/li\u003e\n\u003cli\u003e1x Type-C USB(20cm)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"M5Stack","offers":[{"title":"Default Title","offer_id":42292882636991,"sku":"MLE03333","price":3700.0,"currency_code":"PHP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0531\/3419\/6927\/files\/MLE03333.jpg?v=1745974168"},{"product_id":"m5stack-tough-esp32-iot-development-board-kit","title":"M5Stack Tough ESP32 IoT Development Kit","description":"\u003ch2\u003e\u003cspan\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eTOUGH\u003c\/strong\u003e, the Waterproof \u003c\/span\u003e\u003ca href=\"https:\/\/shop.m5stack.com\/\"\u003eESP32\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003eembedded controller, is an industrial-grade programmable embedded controller designed for demanding applications. Powered by the Espressif ESP32 chipset with integrated Wi-Fi, the \u003c\/span\u003e\u003ca href=\"https:\/\/shop.m5stack.com\/\"\u003eesp32 kits\u003c\/a\u003e\u003cspan\u003e feature a dual-core low-power Xtensa® 32-bit LX6 microprocessor with a clock frequency of up to 240MHz.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eWith a combination of 8M PSRAM and 16M FLASH memory, TOUGH offers ample storage capacity for your projects. It is equipped with a 2.0-inch HD IPS display panel, a high-sensitive capacitive touch screen, and a wide range of peripherals and expansion interfaces, providing versatility and flexibility for various applications.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eTOUGH is built with full-coverage support, making it dustproof and waterproof. This rugged design ensures the stability of circuit operation, even in complex industrial environments. It is an ideal choice for industrial control systems, smart buildings, outdoor node data acquisition, and other challenging applications.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCaution:\u003c\/strong\u003e Please DO NOT immerse the enclosure in water. There is no protection from immersion.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStructural Design:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eWater-resistant with an 'o-ring sealing' contains Waterproof M12 Connectors can complete against solid objects, dust, sand, and dirt and against the effects of immersion.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eUV resistant enclosure design\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eA variety of installations Screw, Rolled strip, Magnetic, Adhesive Back\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWaterproof M12 Connectors\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh integration:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e2 inches LCD capacitive Multi-touch screen\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eNS4168 16bits I2S power amplifier + 1W speaker\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTFCard slot\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAXP192 power management chip + BM8563-RTC clock -\u0026gt; Low-power power solution, Wake Up with an RTC Alarm Clock\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDelicate RF circuit delivers robust and consistent wireless communication\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrong expandability:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eEquipped with programable expansion board\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eIntegrated with 12v-\u0026gt;5V flexible DC\/DC converter. flexible power supply\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRS485 conversion circuit\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePortA, B, C\/ 3x Grove expansion interface\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eEasy access to M5Stack's software and hardware system, plug-and-play sensor expansion\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow code development:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eSupport UIFlow graphical programming platform, scripting-free, cloud push\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFully compatible with with Arduino, ESP32-IDF, and other mainstream development platforms\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eExecuting Dual-core processor on FreeRTOS to run multiple tasks for better performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eESP32-D0WD-V3\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e16MB Flash + 8MB PSRAM\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWaterproof and Dustproof\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eUV resistant enclosure design protection\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e2 inches LCD capacitive Multi-touch screen\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAdvanced low power techniques: Wake Up with an RTC Alarm Clock\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIntegrated with 12v-\u0026amp;gt;5V flexible DC\/DC converter. Flexible power supply\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRS485\/I2C\/GPIO\/UART interface\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDevelopment platform:\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eArduino\/UIFlow\/ESP-IDF\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eSpecifications: \u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Code: \u003c\/strong\u003eK034\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eESP32-D0WDQ6-V3: \u003c\/strong\u003e240MHz dual core, 600 DMIPS, 520KB SRAM, Wi-Fi\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlash:\u003c\/strong\u003e 16MB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePSRAM: \u003c\/strong\u003e8MB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection level: \u003c\/strong\u003eWaterproof\/Dustproof\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput voltage: \u003c\/strong\u003eUSB(5V @ 500mA) RS485 DC Input (12V @ 1A)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInterface: \u003c\/strong\u003eTypeC x 1, GROVE x4 (RS485\/I2C\/G\/UART interface)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIPS LCD: \u003c\/strong\u003e2.0\"@320*240 ILI9342C full color display, maximum brightness 853nit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTouch Panel Driver Chip: \u003c\/strong\u003eCHSC6540\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeaker configuration: \u003c\/strong\u003eNS4168 16bit I2S amplifier + 1W speaker\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRTC clock chip: \u003c\/strong\u003eBM8563\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePMU: \u003c\/strong\u003eAXP192\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB chip: \u003c\/strong\u003eCH9102 USB-TTL serial port\/program download circuit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTF card slot: \u003c\/strong\u003eMaximum support 16GB memory card\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAntenna: \u003c\/strong\u003e3D-Wi-Fi\/BLE Antenna\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShell material: \u003c\/strong\u003eUV-resistant plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet weight: \u003c\/strong\u003e108g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGross weight: \u003c\/strong\u003e139g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct size: \u003c\/strong\u003e58 * 76 * 41 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePacking size: \u003c\/strong\u003e99 * 80 * 45 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eIoT controller\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eData acquisition\/display terminal\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTiming controller\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003ePart List:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x M5Stack TOUGH\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1x Type-C USB(1m)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1x 2.5mm hexagon wrench\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1x 1.25-2P single head terminal line\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1x 1.25-4P single head terminal line\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1x Waterproof O-ring\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"M5Stack","offers":[{"title":"Default Title","offer_id":42292884046015,"sku":"MLE03336","price":3399.0,"currency_code":"PHP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0531\/3419\/6927\/files\/MLE03336.jpg?v=1746694288"},{"product_id":"m5stickc-plus-esp32-pico-mini-iot-development-kit","title":"M5StickC Plus ESP32-PICO Mini IoT Development Kit","description":"\u003ch2\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eM5StickC PLUS\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eis an upgraded version of the original M5StickC, featuring\u003ca href=\"https:\/\/shop.m5stack.com\/\"\u003e\u003cspan\u003e \u003c\/span\u003eESP32\u003c\/a\u003e-PICO-D4 with Wi-Fi connectivity and a larger screen. This compact and portable IoT development board is designed to be user-friendly and open source, allowing you to easily bring your ideas to life and accelerate your IoT prototyping process. With M5StickC PLUS, you can enjoy a streamlined development experience, reducing the complexities often associated with building IoT projects.\u003c\/p\u003e\n\u003cp\u003eAs one of the core devices in the M5Stack product series, M5StickC PLUS offers a rich set of hardware resources integrated into its compact body. These resources include\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003einfrared\u003c\/strong\u003e,\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eRTC\u003c\/strong\u003e,\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003emicrophone\u003c\/strong\u003e,\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eLED\u003c\/strong\u003e,\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eIMU\u003c\/strong\u003e, buttons, and\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ePMU\u003c\/strong\u003e. Notably, this upgraded version introduces new features such as a buzzer, a larger\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e1.14-inch\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eLCD screen with a resolution of\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e135 * 240\u003c\/strong\u003e, and a more stable hardware design. The increased display area by 18.7% and the enhanced battery capacity from 95mAh to\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e120mAh\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003efurther enhance the usability and performance of the device.\u003c\/p\u003e\n\u003cp\u003eM5StickC PLUS is designed to support the HAT and Unit family of products, expanding its capabilities and providing compatibility with various accessories and modules. This allows you to easily extend the functionality of your projects and explore a wide range of possibilities. With its improved features and expanded compatibility, M5StickC PLUS is an excellent choice for IoT development, enabling you to create innovative solutions with ease.\u003c\/p\u003e\n\u003cp style=\"padding-left: 40px;\"\u003e\u003cstrong\u003ePower switch operation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"list-style-type: none;\"\u003e\n\u003cul\u003e\n\u003cli\u003ePower on: Press power button for 2 seconds\u003c\/li\u003e\n\u003cli\u003ePower off: Press power button for 6 seconds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNotice:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBaud rate supported by M5StickC Plus: 1200 ~115200, 250K, 500K, 750K, 1500K\u003c\/li\u003e\n\u003cli\u003eG36\/G25 share the same port, when one of the pins is used, the other pin should be set as a floating input\u003c\/li\u003e\n\u003cli\u003eFor example, to use the G36 pin as the ADC input, Configuration the G25 pin as FLOATING\u003c\/li\u003e\n\u003cli\u003eThe input range of VBUS_VIN and VBUS_USB is limited to 4.8-5.5V, and the internal battery will be charged through AXP192 power management when VBUS is powered.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"product-features\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eESP32-based support BLE 4.2 and WiFi\u003c\/li\u003e\n\u003cli\u003eBuilt-in 6-Axis IMU\u003c\/li\u003e\n\u003cli\u003eRed LED\u003c\/li\u003e\n\u003cli\u003eIR transmitter\u003c\/li\u003e\n\u003cli\u003eMicrophone\u003c\/li\u003e\n\u003cli\u003eRTC\u003c\/li\u003e\n\u003cli\u003eButtons, LCD(1.14 inch)\u003c\/li\u003e\n\u003cli\u003eBuilt-in Lipo Battery\u003c\/li\u003e\n\u003cli\u003eExtendable Socket\u003c\/li\u003e\n\u003cli\u003eBuilt-in Passive Buzzer\u003c\/li\u003e\n\u003cli\u003eWearable \u0026amp; Wall mounted\u003c\/li\u003e\n\u003cli\u003eDevelopment Platform\n\u003cul\u003e\n\u003cli\u003e\u003ca rel=\"noopener\" href=\"http:\/\/flow.m5stack.com\/\" target=\"_blank\"\u003eUIFlow \u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca rel=\"noopener\" href=\"http:\/\/micropython.org\/\" target=\"_blank\"\u003eMicroPython\u003c\/a\u003e \u003c\/li\u003e\n\u003cli\u003e\u003ca rel=\"noopener\" href=\"http:\/\/www.arduino.cc\/\" target=\"_blank\"\u003eArduino\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/nanoframework\/nanoFramework.M5Stack\" target=\"_blank\"\u003e.NET nanoFramework\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Code: \u003c\/strong\u003e\u003cspan\u003eK016-P\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eESP32: \u003c\/strong\u003e240MHz dual core, 600 DMIPS, 520KB SRAM, Wi-Fi\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlash Memory: \u003c\/strong\u003e4MB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Input: \u003c\/strong\u003e5V @ 500mA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort: \u003c\/strong\u003eTypeC x 1, GROVE(I2C+I\/0+UART) x 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLCD screen:\u003c\/strong\u003e 1.14 inch, 135*240 Colorful TFT LCD, ST7789v2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eButton: \u003c\/strong\u003eCustom button x 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED: \u003c\/strong\u003eRED LED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMEMS: \u003c\/strong\u003eMPU6886\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuzzer: \u003c\/strong\u003ebuilt-in buzzer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIR: \u003c\/strong\u003eInfrared transmission\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMIC: \u003c\/strong\u003eSPM1423\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRTC: \u003c\/strong\u003eBM8563\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePMU: \u003c\/strong\u003eAXP192\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery: \u003c\/strong\u003e120 mAh @ 3.7V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAntenna: \u003c\/strong\u003e2.4G 3D Antenna\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePIN port: \u003c\/strong\u003eG0, G25\/G36, G26, G32, G33\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Temperature: \u003c\/strong\u003e0°C to 60°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet weight: \u003c\/strong\u003e15g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGross weight: \u003c\/strong\u003e21g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Size: \u003c\/strong\u003e48.2*25.5*13.7mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Size: \u003c\/strong\u003e65*25*15mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCase Material: \u003c\/strong\u003ePlastic ( PC )\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"applications\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eInternet of things terminal controller\u003c\/li\u003e\n\u003cli\u003eWearable devices\u003c\/li\u003e\n\u003cli\u003eStem education product\u003c\/li\u003e\n\u003cli\u003eDIY creation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"include\"\u003e\u003cstrong\u003ePart List:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x M5StickC Plus\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003ch4 id=\"usb-drive-problems\"\u003eUSB Drive problems\u003c\/h4\u003e\n\u003cp\u003eUnitV\/M5StickV\/M5StickC\/ATOM may not work without driver in some systems. Users can manually install \u003ca rel=\"noopener\" href=\"https:\/\/ftdichip.com\/drivers\/vcp-drivers\/\" target=\"_blank\"\u003eFTDI driver \u003c\/a\u003eto fix this problem. Take the win10 environment as an example, download the driver file that matches the operating system, decompress it, and install it through the device manager. (Note: In some system environments, the driver needs to be installed twice for the driver to take effect. The unrecognized device name is usually \u003ccode\u003eM5Stack\u003c\/code\u003e or \u003ccode\u003eUSB Serial\u003c\/code\u003e. Windows recommends using the driver file to install directly in the device manager (custom Update), the executable file installation method may not work properly).\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"product_pic\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0531\/3419\/6927\/files\/ftdi_01.webp\" class=\"lazypreload\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0531\/3419\/6927\/files\/ftdi_02.webp\" class=\"lazypreload\"\u003e\u003cimg height=\"333\" width=\"393\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0531\/3419\/6927\/files\/ftdi_03.webp\" class=\"lazypreload\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"M5Stack","offers":[{"title":"Default Title","offer_id":42292884177087,"sku":"MLE03337","price":1600.0,"currency_code":"PHP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0531\/3419\/6927\/files\/MLE03337_2.jpg?v=1746750206"},{"product_id":"atom-lite-esp32-development-kit","title":"M5Stack ATOM Lite ESP32 Development Kit","description":"\u003ch2\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eAtom Lite\u003c\/strong\u003e, which has a size of \u003ccode\u003eonly 24*24mm\u003c\/code\u003e, is a very compact development board in the M5Stack development kit series. It provides more GPIOs for user customization which is very suitable for embedded smart home devices and in making smart toys. The main control adopts the \u003ccode\u003eESP32-PICO\u003c\/code\u003e chip which comes integrated with \u003ccode\u003eWi-Fi and Bluetooth\u003c\/code\u003e technologies and has a \u003ccode\u003e4MB\u003c\/code\u003e of integrated SPI flash memory. Atom Lite board provides an Infra-Red LED, a RGB LED, buttons, and a HY2.0 interface. In addition, it can connect to external sensors and actuators through 6 GPIOs. The on-board Type-C USB interface enables rapid program upload and execution.\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch4 id=\"usb-drive-problems\"\u003e\u003cstrong\u003eUSB Drive problems\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eUnitV\/M5StickV\/M5StickC\/ATOM may not work without driver in some systems. Users can manually install \u003ca href=\"https:\/\/ftdichip.com\/drivers\/vcp-drivers\/\" rel=\"noopener\" target=\"_blank\"\u003eFTDI driver \u003c\/a\u003eto fix this problem. Take the win10 environment as an example, download the driver file that matches the operating system, decompress it, and install it through the device manager. (Note: In some system environments, the driver needs to be installed twice for the driver to take effect. The unrecognized device name is usually \u003ccode\u003eM5Stack\u003c\/code\u003e or \u003ccode\u003eUSB Serial\u003c\/code\u003e. Windows recommends using the driver file to install directly in the device manager (custom Update), the executable file installation method may not work properly).\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"product_pic\"\u003e\u003cimg class=\"lazypreload\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0531\/3419\/6927\/files\/ftdi_01.webp\"\u003e\u003cimg class=\"lazypreload\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0531\/3419\/6927\/files\/ftdi_02.webp\"\u003e\u003cimg class=\"lazypreload\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0531\/3419\/6927\/files\/ftdi_03.webp\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 id=\"product-features\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eESP32-based\u003c\/li\u003e\n\u003cli\u003eRGB LED(SK6812)\u003c\/li\u003e\n\u003cli\u003eProgrammable button\u003c\/li\u003e\n\u003cli\u003eBuilt-in Infra-red\u003c\/li\u003e\n\u003cli\u003eExtendable Pins \u0026amp; Holes\u003c\/li\u003e\n\u003cli\u003eProgram Platform: \u003ca href=\"http:\/\/www.arduino.cc\/\" rel=\"noopener\" target=\"_blank\"\u003eArduino,\u003c\/a\u003e \u003ca href=\"http:\/\/flow.m5stack.com\/\" rel=\"noopener\" target=\"_blank\"\u003eUIFlow\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Code: \u003c\/strong\u003eC008\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eESP32: \u003c\/strong\u003e240MHz dual core, 600 DMIPS, 520KB SRAM, Wi-Fi\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlash: \u003c\/strong\u003e4MB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Input:\u003c\/strong\u003e 5V @ 500mA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort:\u003c\/strong\u003e TypeC x 1, GROVE(I2C+I\/0+UART) x 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePIN Port:\u003c\/strong\u003e G19, G21,G22,G23,G25, G33\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRGB LED: \u003c\/strong\u003eSK6812 3535 x 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIR:\u003c\/strong\u003e Infrared transmission\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eButton:\u003c\/strong\u003e Custom button x 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAntenna:\u003c\/strong\u003e 2.4G 3D Antenna\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Temperature:\u003c\/strong\u003e 0°C to 60°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet weight:\u003c\/strong\u003e 3g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGross weight:\u003c\/strong\u003e 12g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Size:\u003c\/strong\u003e 24*24*10mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Size:\u003c\/strong\u003e 43*43*13mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCase Material:\u003c\/strong\u003e Plastic ( PC )\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"applications\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eInternet of things terminal controller\u003c\/li\u003e\n\u003cli\u003eIoT node\u003c\/li\u003e\n\u003cli\u003eWearable peripherals\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"include\"\u003e\u003cstrong\u003ePart List:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x ATOM Lite\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"M5Stack","offers":[{"title":"Default Title","offer_id":42292884242623,"sku":"MLE03339","price":679.0,"currency_code":"PHP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0531\/3419\/6927\/files\/MLE03339.jpg?v=1745984945"},{"product_id":"atom-matrix-esp32-development-kit","title":"M5Stack ATOM Matrix ESP32 Development  Kit","description":"\u003ch2\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eATOM Matrix\u003c\/strong\u003e\u003cspan\u003e  is a compact development board in the M5Stack development kit series. With its small size of only 24 * 24mm, this board is perfect for handy and miniature embedded device development. It offers an increased number of GPIO pins, providing ample flexibility for your projects.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe main control of ATOM Matrix is powered by the \u003c\/span\u003e\u003ca href=\"https:\/\/shop.m5stack.com\/\"\u003eESP32\u003c\/a\u003e\u003cspan\u003e-PICO-D4 chip, which integrates Wi-Fi technologies and includes 4MB of SPI flash memory. This ensures seamless connectivity and sufficient storage capacity for your applications.ATOM Matrix features an Infra-Red LED and a 5 * 5 RGB LED matrix on the panel, allowing for vibrant visual displays. Additionally, it comes equipped with a built-in IMU sensor (MPU6886) and a HY2.0 interface, expanding its capabilities for motion sensing and communication with other devices.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eTo enhance user interaction, a programmable button is conveniently placed below the RGB LED matrix, enabling easy input integration into various projects. The on-board USB interface (Type-C) facilitates fast program uploading and execution, simplifying the development process. With its compact size, powerful features, and convenient mounting options with the M2 screw hole on the back, ATOM Matrix is the ideal choice for developers seeking a versatile and compact solution for embedded device development.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"warn\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e When using FastLED lib, the recommended brightness of RGB LED is 20. Please do not set it to a high brightness value to avoid damage to the LED and acrylic screen. (In ATOM lib, we have mapped its appropriate brightness range to 0~100)\u003c\/p\u003e\n\u003ch2 id=\"product-features\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eESP32 PICO-based\u003c\/li\u003e\n\u003cli\u003eProgrammable button\u003c\/li\u003e\n\u003cli\u003e5 * 5 RGB LED matrix panel(WS2812C)\u003c\/li\u003e\n\u003cli\u003eBuitl-in Infra-red LED\u003c\/li\u003e\n\u003cli\u003eBuilt-in MPU6886 Inertial Sensor\u003c\/li\u003e\n\u003cli\u003eExtendable Pins \u0026amp; Holes\u003c\/li\u003e\n\u003cli\u003eProgram Platform: \u003ca rel=\"noopener\" href=\"http:\/\/www.arduino.cc\/\" target=\"_blank\"\u003eArduino \u003c\/a\u003e\u003ca rel=\"noopener\" href=\"http:\/\/flow.m5stack.com\/\" target=\"_blank\"\u003eUIFlow\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Code: \u003c\/strong\u003eC008-B\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eESP32:\u003c\/strong\u003e 240MHz dual core, 600 DMIPS, 520KB SRAM, Wi-Fi\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlash:\u003c\/strong\u003e 4MB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Input: \u003c\/strong\u003e5V @ 500mA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort: \u003c\/strong\u003eTypeC x 1, GROVE(I2C+I\/0+UART) x 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePIN Port: \u003c\/strong\u003eG19, G21,G22,G23,G25, G33\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRGB LED:\u003c\/strong\u003e WS2812C 2020 x 25\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMEMS: \u003c\/strong\u003eMPU6886\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIR:\u003c\/strong\u003e Infrared transmission\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eButton: \u003c\/strong\u003eCustom button x 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAntenna: \u003c\/strong\u003e2.4G 3D Antenna\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Temperature: \u003c\/strong\u003e0°C to 60°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet weight: \u003c\/strong\u003e3g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGross weight: \u003c\/strong\u003e14g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Size: \u003c\/strong\u003e24*24*14mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Size: \u003c\/strong\u003e43*43*20mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCase Material:\u003c\/strong\u003e Plastic ( PC )\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"applications\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eInternet of things terminal controller\u003c\/li\u003e\n\u003cli\u003eIoT node\u003c\/li\u003e\n\u003cli\u003eWearable peripherals\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"include\"\u003e\u003cstrong\u003ePart List:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x ATOM Matrix\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/h4\u003e\n\u003ch4 id=\"usb-drive-problems\"\u003e\u003cstrong\u003eUSB Drive problems\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eUnitV\/M5StickV\/M5StickC\/ATOM may not work without driver in some systems. Users can manually install \u003ca rel=\"noopener\" href=\"https:\/\/ftdichip.com\/drivers\/vcp-drivers\/\" target=\"_blank\"\u003eFTDI driver \u003c\/a\u003eto fix this problem. Take the win10 environment as an example, download the driver file that matches the operating system, decompress it, and install it through the device manager. (Note: In some system environments, the driver needs to be installed twice for the driver to take effect. The unrecognized device name is usually \u003ccode\u003eM5Stack\u003c\/code\u003e or \u003ccode\u003eUSB Serial\u003c\/code\u003e. Windows recommends using the driver file to install directly in the device manager (custom Update), the executable file installation method may not work properly).\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"product_pic\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0531\/3419\/6927\/files\/ftdi_01.webp\" class=\"lazypreload\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0531\/3419\/6927\/files\/ftdi_02.webp\" class=\"lazypreload\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0531\/3419\/6927\/files\/ftdi_03.webp\" class=\"lazypreload\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"M5Stack","offers":[{"title":"Default Title","offer_id":42292884308159,"sku":"MLE03340","price":1050.0,"currency_code":"PHP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0531\/3419\/6927\/files\/MLE03340.jpg?v=1746751634"},{"product_id":"m5stamp-c3-mate-with-pin-header","title":"M5Stack M5Stamp C3 Mate with Pin Header","description":"\u003ch2\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eM5Stack just added a new family to its popular series of modules with the Stamp-C3. the new Stamp-C3 featuring ESPRESSIF ESP32-C3\u003cspan\u003e \u003c\/span\u003e\u003ccode\u003eRISC-V\u003c\/code\u003e\u003cspan\u003e \u003c\/span\u003eMCU with\u003cspan\u003e \u003c\/span\u003e\u003ccode\u003eWi-Fi\u003c\/code\u003e\u003cspan\u003e \u003c\/span\u003econnectivity for IoT edge devices such as home appliances and Industrial Automation. By combining RSA-3072-based secure boot and the AES-128-XTS-based flash encryption, while also make it optimal for industrial IoT equipment collecting sensor data within a factory or a building.\u003c\/p\u003e\n\u003cp\u003eThe Stamp-C3 is based on\u003cspan\u003e \u003c\/span\u003e\u003ccode\u003e32-bit RISC-V\u003c\/code\u003e\u003cspan\u003e \u003c\/span\u003emicro controller and operates at a maximum clock frequency of\u003cspan\u003e \u003c\/span\u003e\u003ccode\u003e160 MHz\u003c\/code\u003e. With 400 KB of internal RAM and\u003cspan\u003e \u003c\/span\u003e\u003ccode\u003e4 MB Flash\u003c\/code\u003e, it can facilitate many different use-cases involving connected devices. Furthermore, the exceptional heat resistance plastic enclosure is sustained at a higher operating temperature.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: \u003c\/strong\u003e\u003cspan\u003eNote: If you need to use SPIFFS filesystem in Arduino IDE. Please install a \u003c\/span\u003e\u003ca href=\"https:\/\/github.com\/lorol\/arduino-esp32fs-plugin\/releases\" target=\"_blank\"\u003epatch package\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003efirst.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 id=\"product-features\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMULTIPLE STYLE:\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eThree types soldering options are available (SMT, DIP, flywire), with a high-temperature resistant plastic enclosure, Peak temperature = 230?\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHIGH INTEGRATION:\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eStamp-C3 contains 5V-\u0026gt;3.3V DC\/DC design, GPIOx13, programmable RGB LED x1, Reset button x1, button x1, 3D antenna, providing stable and reliable wireless communication.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLOW-CODE DEVELOPMENT:\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eStamp-C3 fully compatible with Arduino, ESP32-IDF, and other mainstream development platforms to quickly build various applications. (UIFlow support coming soon)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Code: \u003c\/strong\u003eK056\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eESP32-C3:\u003c\/strong\u003e 32bit RISC-V single-core processor, clocked at 160 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStorage:\u003c\/strong\u003e 384KB ROM, 400KB SRAM, 8KB RTC SRAM, 4MB FLASH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWi-Fi:\u003c\/strong\u003e 2.4 GHz band supports 20 MHz and 40 MHz bandwidth, IEEE 802.11 b\/g\/n protocol, data rate up to 150 Mbps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput voltage:\u003c\/strong\u003e 5V @ 500mA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHMI: \u003c\/strong\u003eProgrammable physical button x 1, reset debugging button x 1, programmable RGB LED (SK6812) x 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB interface:\u003c\/strong\u003e TypeC x1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAntenna Type:\u003c\/strong\u003e 2.4G 3D Antenna\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModule peripheral interface resources:\u003c\/strong\u003e ADC, GPIO, SPI, UART, I2C, I2S, PWM, RMT, DMA, USB serial port, TWAI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIO interface x13:\u003c\/strong\u003e G21, G20, G9, G18, G19, G1, G0, G10, G8, G7, G6, G5, G4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIO interface spacing: \u003c\/strong\u003e2.54mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFixing screw specifications:\u003c\/strong\u003e M2*4 countersunk head hexagon socket mechanical teeth\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet weight:\u003c\/strong\u003e 3.8g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct size:\u003c\/strong\u003e 34 * 20 * 4.6mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePacking size: \u003c\/strong\u003e85*55mm sealing bag (translucent)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"application\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDIY Prototyping\u003c\/li\u003e\n\u003cli\u003eHome Appliances\u003c\/li\u003e\n\u003cli\u003eIndustrial Automation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"include\"\u003e\u003cstrong\u003ePart List:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eM5Stamp C3 Mate:\n\u003cul\u003e\n\u003cli\u003e1 x M5Stamp C3\u003c\/li\u003e\n\u003cli\u003e1 x Heat Resistant Sticker\u003c\/li\u003e\n\u003cli\u003e2 x 2.54-9P Pin\u003c\/li\u003e\n\u003cli\u003e2 x 2.54-6P Pin\u003c\/li\u003e\n\u003cli\u003e2 x 90° Grove Connector\u003c\/li\u003e\n\u003cli\u003e1 x M2 Hex Key\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"M5Stack","offers":[{"title":"Default Title","offer_id":42292884340927,"sku":"MLE03342","price":550.0,"currency_code":"PHP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0531\/3419\/6927\/files\/MLE03342.jpg?v=1746753434"},{"product_id":"proto-pegboard-module-13-2","title":"M5Stack Proto Pegboard Module - 13.2","description":"\u003ch2\u003e\u003cstrong\u003eDescription:\u003cbr\u003e\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePROTO 13.2\u003c\/strong\u003e is a universal DIY proto module in the m5stack stack module series, with a height of 13.2mm. You can easily build your own custom circuits by using this module. You can design and build the prototype circuit according to your own needs, and interact with the M5 Core on the top layer through M-BUS. There are HY2.0 4P, DC power socket, VH3.96 and other common openings on the board, so it is very simple to use.\u003c\/p\u003e\n\u003ch2 id=\"product-features\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMain Hole Size: 0.039\" 1mm (CNC Drilled)\u003c\/li\u003e\n\u003cli\u003eHole Pitch: 0.1\" - (2.54 mm)\u003c\/li\u003e\n\u003cli\u003eEntire Hole Quantity: 169 Holes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eSpecifications: \u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Code: \u003c\/strong\u003eM032\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet weight:\u003c\/strong\u003e 24g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGross weight: \u003c\/strong\u003e49g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Size:\u003c\/strong\u003e 54.2*54.2*13.2mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Size:\u003c\/strong\u003e 93*64*20mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"include\"\u003e\u003cstrong\u003ePart List:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x PROTO 13.2 board\u003c\/li\u003e\n\u003cli\u003e1x M-bus\u003c\/li\u003e\n\u003cli\u003e3x VH-3.96 3P Plug \u0026amp; Plug Base\u003c\/li\u003e\n\u003cli\u003e1x HY-2.0 4P Plug Base\u003c\/li\u003e\n\u003cli\u003e1x DC 5V Power outlet\u003c\/li\u003e\n\u003cli\u003e4x M2*5mm Hexagon self tapping screw\u003c\/li\u003e\n\u003cli\u003e1x M2 Hex Key\u003c\/li\u003e\n\u003cli\u003e1x sticker\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"M5Stack","offers":[{"title":"Default Title","offer_id":42292884373695,"sku":"MLE03343","price":300.0,"currency_code":"PHP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0531\/3419\/6927\/files\/MLE03343.jpg?v=1746689795"},{"product_id":"commu-module-extend-rs485-ttl-can-i2c-port","title":"M5Stack COMMU Module Extend RS485\/TTL CAN\/I2C Port","description":"\u003ch2\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eCOMMU\u003c\/strong\u003e is a Muti-Communication-Interface-Converter. Integrated with 2\u003cem\u003eI2C, 1\u003c\/em\u003eTTL, 1\u003cem\u003eCAN, 1\u003c\/em\u003eRS485. Apparently COMMU has packed with most of series communications.\u003c\/p\u003e\n\u003cp\u003eDefault connection: TTL - UART0, RS485 - UART2. Since ESP32 pin map is allowed for re-assign, you can re-assign or re-mapping the TTL or RS485 interface to other pins.\u003c\/p\u003e\n\u003cp\u003eBe care about TTL Interface. It is a UART Interface actually by default. But you can switch it to connect with UART2 after changed those jumpers (J6, J7, J9, J10).\u003c\/p\u003e\n\u003ch2 id=\"product-features\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e2x I2C Interface\u003c\/li\u003e\n\u003cli\u003e1x CAN Interface\u003c\/li\u003e\n\u003cli\u003e1x RS485 Interface\u003c\/li\u003e\n\u003cli\u003e1x TTL Interface\u003c\/li\u003e\n\u003cli\u003eCAN controller: MCP2515-1\/SO\u003c\/li\u003e\n\u003cli\u003eRS485 Transceiver: SP3485EN-L\/TR\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Code: \u003c\/strong\u003eM011\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInterface:\u003c\/strong\u003e I2C x2, CAN x1, RS485 x1, TTL x1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCAN Controller:\u003c\/strong\u003e MCP2515-1\/SO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRS485 transceiver:\u003c\/strong\u003e SP3485EN-L\/TR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet weight:\u003c\/strong\u003e 13.5g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGross weight:\u003c\/strong\u003e 24g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Size:\u003c\/strong\u003e 54.2*54.2*13mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Size:\u003c\/strong\u003e 60*57*17mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic ( PC )\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"include\"\u003e\u003cstrong\u003ePart List:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x M5Stack COMMU Module\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"M5Stack","offers":[{"title":"Default Title","offer_id":42292884471999,"sku":"MLE03346","price":800.0,"currency_code":"PHP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0531\/3419\/6927\/files\/MLE03346.jpg?v=1745975984"},{"product_id":"pir-motion-sensor-as312","title":"M5Stack PIR Motion Sensor (AS312)","description":"\u003ch2\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePIR\u003c\/strong\u003e is a human body infrared unit. It belongs to the \"passive pyroelectric infrared detector\". It detects the infrared radiation emitted and reflected by the human body or object. When infrared is detected, the output level is high and it takes a while. Delay (high during the period and allow repeated triggers) until the trigger signal disappears (restores low).\u003c\/p\u003e\n\u003cp\u003eThis Unit communicates with the M5Core via the GROVE B.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eNotice: This Unit has 2s delay time.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2 id=\"product-features\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDetects the distance: 500cm\u003c\/li\u003e\n\u003cli\u003elatency time: 2s\u003c\/li\u003e\n\u003cli\u003eSensing range: \u0026lt; 100°\u003c\/li\u003e\n\u003cli\u003eQuiescent current: \u0026lt; 60uA\u003c\/li\u003e\n\u003cli\u003eOperating temperature: -20 - 80 °C\u003c\/li\u003e\n\u003cli\u003eGROVE interface, support \u003ca href=\"http:\/\/flow.m5stack.com\/\" rel=\"noopener\" target=\"_blank\"\u003eUIFlow \u003c\/a\u003eand \u003ca href=\"http:\/\/www.arduino.cc\/\" rel=\"noopener\" target=\"_blank\"\u003eArduino\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eTwo Lego installation holes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Code: \u003c\/strong\u003eU004\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet weight: \u003c\/strong\u003e5g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGross weight: \u003c\/strong\u003e20g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Size: \u003c\/strong\u003e32*24*12mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Size: \u003c\/strong\u003e60*57*17mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"applications\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHuman body Induction Lamp\u003c\/li\u003e\n\u003cli\u003eSecurity Product\u003c\/li\u003e\n\u003cli\u003eAutomatic Induction Appliance Settings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"include\"\u003e\u003cstrong\u003ePart List:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x PIR unit\u003c\/li\u003e\n\u003cli\u003e1x GROVE Cable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"M5Stack","offers":[{"title":"Default Title","offer_id":42292884832447,"sku":"MLE03351","price":380.0,"currency_code":"PHP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0531\/3419\/6927\/files\/MLE03351.jpg?v=1746688999"},{"product_id":"earth-moisture-sensor-unit-analog-and-digital-output","title":"M5Stack Earth Moisture Unit","description":"\u003ch2\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eEARTH\u003c\/strong\u003e\u003cspan\u003e is a soil moisture sensor designed to measure the moisture content in soil or similar materials. The sensor consists of two measurement probes that are inserted into the soil being tested. As the moisture content increases, the conductivity of the soil improves. By measuring the potential difference between the two probes and performing analog-to-digital conversion (ADC), the sensor can provide moisture readings.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eEARTH unit also features a 10K adjustable resistor, which is used to calibrate the detection threshold. This allows you to fine-tune the sensitivity of the sensor according to your specific requirements.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eBy utilizing EARTH unit, you can monitor and analyze the moisture levels in soil, enabling efficient irrigation and plant care. The sensor can be integrated with the M5Core device or other microcontrollers to receive the moisture readings and perform further actions or analysis based on the moisture data.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 id=\"product-features\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAdjustable threshold, including 10K adjustable resistor\u003c\/li\u003e\n\u003cli\u003eAnalog \u0026amp; Digital output\u003c\/li\u003e\n\u003cli\u003eGROVE interface, support \u003ca rel=\"noopener\" href=\"http:\/\/flow.m5stack.com\/\" target=\"_blank\"\u003eUIFlow \u003c\/a\u003eand \u003ca rel=\"noopener\" href=\"http:\/\/www.arduino.cc\/\" target=\"_blank\"\u003eArduino\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eTwo Lego-compatible holes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Code: \u003c\/strong\u003eU019\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet weight: \u003c\/strong\u003e5g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGross weight: \u003c\/strong\u003e18g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Size:\u003c\/strong\u003e 64.4*24.1*8.1mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Size:\u003c\/strong\u003e 67*53*12mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"applications\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePotted soil moisture monitoring\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"include\"\u003e\u003cstrong\u003ePart List:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x EARTH unit\u003c\/li\u003e\n\u003cli\u003e1x GROVE Cable\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"M5Stack","offers":[{"title":"Default Title","offer_id":42292884897983,"sku":"MLE03353","price":200.0,"currency_code":"PHP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0531\/3419\/6927\/files\/MLE03353_2.jpg?v=1746762286"},{"product_id":"tvoc-eco2-gas-sensor-unit-sgp30","title":"M5Stack TVOC\/eCO2 Gas Unit","description":"\u003ch2\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eTVOC\/eCO2 mini Unit\u003c\/strong\u003e is a digital multi-pixel gas sensor unit with integrated SGP30.\u003c\/p\u003e\n\u003cp\u003eIt mainly measures various VOC (volatile organic compounds) and H2 in the air. It can be programmed to detect TVOC (total volatile organic compounds) and eCO2 (equivalent carbon dioxide reading)Concentration measurement.\u003c\/p\u003e\n\u003cp\u003eTypical measurement accuracy is 15% within the measurement range, the SGP30 reading is internally calibrated and output, which can maintain long-term stability. SGP30 uses I2C protocol communication with on-chip humidity compensation function, which can be turned on through an external humidity sensor.\u003c\/p\u003e\n\u003cp\u003eIf you need to obtain accurate results, you need to calibrate according to a known measurement source. SGP30 has a built-in calibration function. In addition, eCO2 is calculated based on the concentration of H2 and cannot completely replace \"true\" CO2 sensors for laboratory use.\u003c\/p\u003e\n\u003ch2 id=\"product-features\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTVOC\/eCO2 concentration detection\u003c\/li\u003e\n\u003cli\u003eI2C communication(0x58)\u003c\/li\u003e\n\u003cli\u003eOutstanding long-term stability\u003c\/li\u003e\n\u003cli\u003eHumidity Compensation\u003c\/li\u003e\n\u003cli\u003e2x LEGO™ Hole\u003c\/li\u003e\n\u003cli\u003eHY2.0 4P interface\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Code: \u003c\/strong\u003eU088\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMeasurement range:\u003c\/strong\u003e Ethanol:0-1000ppm,H2:0-1000ppm,TVOC:0-60000 ppb,eCO2:400-60000 ppm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTVOC\/eCO2 Sampling rate: \u003c\/strong\u003e1Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTVOC\/eCO2 Resolution: \u003c\/strong\u003eTVOC:1\/6\/32bbp,eCO2:1\/3\/9\/31ppm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommunication protocol: \u003c\/strong\u003eI2C:0x58\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet Weight:\u003c\/strong\u003e 4g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGross Weight: \u003c\/strong\u003e8g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Size: \u003c\/strong\u003e24*24*13mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Size: \u003c\/strong\u003e35*36*18mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCase material:  \u003c\/strong\u003ePlastic(PC)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"applications\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAir quality monitoring\u003c\/li\u003e\n\u003cli\u003eeCO2 concentration\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"include\"\u003e\u003cstrong\u003ePart List:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x TVOC\/eCO2 Mini Unit\u003c\/li\u003e\n\u003cli\u003e1x HY2.0 Cable(5CM)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"M5Stack","offers":[{"title":"Default Title","offer_id":42292884930751,"sku":"MLE03352","price":800.0,"currency_code":"PHP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0531\/3419\/6927\/files\/MLE03352_1.jpg?v=1745828484"},{"product_id":"env-iii-unit-with-temperature-humidity-air-pressure-sensor-sht30qmp6988","title":"M5Stack ENV III Unit with Temperature Humidity Pressure Sensor","description":"\u003ch2\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eENV III\u003c\/strong\u003e is an environmental sensor that integrates SHT30 and QMP6988 internally to detect temperature, humidity, and atmospheric pressure data. SHT30 is a high-precision and low-power digital temperature and humidity sensor, and supports I2C interface (SHT30:0x44 , QMP6988:0x70).QMP6988 is an absolute air pressure sensor specially designed for mobile applications, with high accuracy and stability, suitable for environmental data collection and detection types of projects.\u003c\/p\u003e\n\u003ch2 id=\"product-features\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSimple and easy to use\u003c\/li\u003e\n\u003cli\u003eHigh accuracy\u003c\/li\u003e\n\u003cli\u003eI2C communication interface\u003c\/li\u003e\n\u003cli\u003eHY2.0-4P interface, support platform \u003ca href=\"http:\/\/flow.m5stack.com\/\" rel=\"noopener\" target=\"_blank\"\u003eUIFlow \u003c\/a\u003e, \u003ca href=\"http:\/\/www.arduino.cc\/\" rel=\"noopener\" target=\"_blank\"\u003eArduino\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e2x LEGO compatible holes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Code: \u003c\/strong\u003eU001-C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum temperature measurement range: \u003c\/strong\u003e-40 ~ 120 ℃\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHighest measurement accuracy: \u003c\/strong\u003e0 ~ 60 ℃\/±0.2℃\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHumidity measurement range\/error: \u003c\/strong\u003e10 ~ 90 %RH \/ ±2%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum measured value of air pressure\/resolution\/error: \u003c\/strong\u003e300 ~ 1100hPa \/ 0.06Pa \/ ±3.9Pa\u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommunication protocol:\u003c\/strong\u003e I2C: SHT30(0x44), QMP6988(0x70)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking temperature:\u003c\/strong\u003e 32°F to 104°F (0°C to 40°C )\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet weight: \u003c\/strong\u003e5g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGross weight: \u003c\/strong\u003e17g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Size:\u003c\/strong\u003e 24.2*32.2*8.1mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Size:\u003c\/strong\u003e 67*53*12mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCase Material:\u003c\/strong\u003e Plastic ( PC )\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWeather station\u003c\/li\u003e\n\u003cli\u003eStorage barn environment monitoring\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"include\"\u003e\u003cstrong\u003ePart List:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x ENV-III Unit\u003c\/li\u003e\n\u003cli\u003e1x HY2.0-4P Cable\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"M5Stack","offers":[{"title":"Default Title","offer_id":42292885029055,"sku":"MLE03356","price":550.0,"currency_code":"PHP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0531\/3419\/6927\/files\/MLE03356.jpg?v=1745983114"},{"product_id":"rfid-unit-2-ws1850s","title":"M5Stack Mini RFID Unit","description":"\u003ch2\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eRFID2\u003c\/strong\u003e is a radio frequency identification unit. Built-in \u003cstrong\u003eWS1850S\u003c\/strong\u003e chip, working frequency is 13.56MHz. Supports \u003ccode\u003ereading card\u003c\/code\u003e, \u003ccode\u003ewriting card\u003c\/code\u003e, \u003ccode\u003erecognition\u003c\/code\u003e, \u003ccode\u003erecording\u003c\/code\u003e, and encoding RF card Multiple functions such as authorization and authorization. Use magnetic field induction technology to realize non-contact two-way information interaction, read and verify the information of proximity cards. It can be used in access control systems, check-in systems, warehouse goods entry and storage, and community vehicle entry and exit registration needs Application scenarios for information verification.\u003c\/p\u003e\n\u003cp class=\"tip\"\u003eRFID2 compared to the previous generation RFID UNIT only makes the replacement of read and write IC (RC522-\u0026gt;WS1850S), there is no difference in function.\u003c\/p\u003e\n\u003ch2 id=\"product-features\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOperating frequency: 13.56 MHz\u003c\/li\u003e\n\u003cli\u003eI2C data rate: Fast mode: up to 400 Kbit\/s; High-speed mode: up to 3400 Kbit\/s\u003c\/li\u003e\n\u003cli\u003eTransceiver buffer: 64 bytes\u003c\/li\u003e\n\u003cli\u003eSupported protocols: ISO14443A, MIFARE and NTAG\u003c\/li\u003e\n\u003cli\u003eWorking temperature: -20?-85?\u003c\/li\u003e\n\u003cli\u003eData storage:\u0026gt; 10 years\u003c\/li\u003e\n\u003cli\u003eReading distance: \u0026lt;20 mm\u003c\/li\u003e\n\u003cli\u003eDevelopment platform: Arduino, UIFlow(Blockly, Python)\u003c\/li\u003e\n\u003cli\u003e2x LEGO compatible holes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct code: \u003c\/strong\u003eU031-B\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRead and Write IC:\u003c\/strong\u003e WS1850S\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating frequency:\u003c\/strong\u003e 13.56MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommunication protocol: \u003c\/strong\u003eI2C: 0x28\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupport protocol:\u003c\/strong\u003e ISO\/IEC 14443 Type A\/Type B protocol\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet weight: \u003c\/strong\u003e6g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGross weight: \u003c\/strong\u003e21g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct size: \u003c\/strong\u003e48 * 24 * 8mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePacking size: \u003c\/strong\u003e67 * 53 * 12mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"applications\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSmart home access control system\u003c\/li\u003e\n\u003cli\u003eVehicle management\u003c\/li\u003e\n\u003cli\u003eSmart transportation\u003c\/li\u003e\n\u003cli\u003eSmart bookshelf\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"include\"\u003e\u003cstrong\u003ePart List: \u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x RFID Unit\u003c\/li\u003e\n\u003cli\u003e1x HY2.0-4P cable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"M5Stack","offers":[{"title":"Default Title","offer_id":42292885061823,"sku":"MLE03359","price":350.0,"currency_code":"PHP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0531\/3419\/6927\/files\/MLE03359_1.jpg?v=1745807601"},{"product_id":"color-sensor-rgb-unit-tcs3472","title":"M5Stack Color Sensor RGB Unit (TCS3472)","description":"\u003ch2\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eCOLOR\u003c\/strong\u003e\u003cspan\u003e is a color recognition unit that integrates the TCS3472 color light-to-digital converter. It is capable of detecting colors and converting the detected color values into RGB data, which can be sent back to the M5Core.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe unit communicates with the M5Core through the PORT A interface using I2C protocol, with an I2C address of 0x29. This allows for seamless integration and communication between the COLOR unit and the M5Stack controllers, enabling accurate color recognition and analysis in your applications.\u003c\/span\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2 id=\"product-features\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDetection range: -40°C~85°C\u003c\/li\u003e\n\u003cli\u003eGROVE interface, support \u003ca rel=\"noopener\" href=\"http:\/\/flow.m5stack.com\/\" target=\"_blank\"\u003eUIFlow \u003c\/a\u003eand \u003ca rel=\"noopener\" href=\"http:\/\/www.arduino.cc\/\" target=\"_blank\"\u003eArduino\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eTwo Lego-compatible holes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Code: \u003c\/strong\u003eU009\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIC:\u003c\/strong\u003e TCS3472\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking temperature range:\u003c\/strong\u003e -40°C~85°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommunication protocol:\u003c\/strong\u003e I2C:0x29\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet weight:\u003c\/strong\u003e 4g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGross weight:\u003c\/strong\u003e 17g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Size:\u003c\/strong\u003e 32.2*24.2*8.2mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Size:\u003c\/strong\u003e 67*53*12mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"applications\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProduct Color Verification\u003c\/li\u003e\n\u003cli\u003eColor tracking robot\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"includes\"\u003e\u003cstrong\u003ePart List:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x COLOR Unit\u003c\/li\u003e\n\u003cli\u003e1x Grove Cable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"M5Stack","offers":[{"title":"Default Title","offer_id":42292885127359,"sku":"MLE03360","price":800.0,"currency_code":"PHP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0531\/3419\/6927\/files\/MLE03360.jpg?v=1745976792"},{"product_id":"mini-dual-button-unit","title":"M5Stack Mini Dual Button Unit","description":"\u003ch2 id=\"description\"\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDual Button\u003c\/strong\u003e\u003cspan\u003e is a unit that features two physical buttons with different colors for user interaction. It allows you to perform operations by detecting the high or low level changes on the input pins associated with each button, thus determining the button's state.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eBy connecting the Dual Button unit to the PORT B port of the M5Core device, you can establish communication and receive input from the buttons. This enables you to incorporate user input and create interactive functionalities in your projects.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe Dual Button unit offers a simple and convenient solution for integrating physical buttons into your M5Core-based applications. Its two-color design allows for visual distinction and enhances usability. Whether you need to trigger specific actions or navigate through menus, the Dual Button unit provides tactile input capabilities for a wide range of applications.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 id=\"product-features\"\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eGROVE interface, support \u003ca rel=\"noopener\" href=\"http:\/\/flow.m5stack.com\/\" target=\"_blank\"\u003eUIFlow \u003c\/a\u003eand \u003ca rel=\"noopener\" href=\"http:\/\/www.arduino.cc\/\" target=\"_blank\"\u003eArduino\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eTwo Lego-compatible holes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Code: \u003c\/strong\u003eU025\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet weight:\u003c\/strong\u003e 8g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGross weight:\u003c\/strong\u003e 22g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Size: \u003c\/strong\u003e48*24*8mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Size:\u003c\/strong\u003e 60*57*17mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"applications\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eGame Controller\u003c\/li\u003e\n\u003cli\u003eRemote control switch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"include\"\u003e\n\u003cstrong\u003ePart\u003c\/strong\u003e List:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Dual BUTTON Unit\u003c\/li\u003e\n\u003cli\u003e1x Grove Cable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"M5Stack","offers":[{"title":"Default Title","offer_id":42292885192895,"sku":"MLE03361","price":209.0,"currency_code":"PHP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0531\/3419\/6927\/files\/MLE03361.jpg?v=1746763021"},{"product_id":"atom-gps-development-kit-m8030-kt","title":"M5Stack ATOM GPS Kit (M8030-KT)","description":"\u003ch2\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eATOM GPS\u003c\/strong\u003e\u003cspan\u003e is a GPS positioning module which is part of the M5 atomic series. The navigation chip is m8030-kt, which has built-in flash and a coin cell battery, which can save the users configuration. It adopts NMEA-0183 protocol output, supports GPS, GLONASS, Galileo, BDS, SBAS and QZSS satellite systems, has 72 search channels, an adjustable refresh rate, and can be widely used in vehicle monitoring such as bus stop reporting, vehicle navigation, ship navigation, track tracking and other applications. In addition, a self elastic TF(MicroSD) card slot is built in. It is possible to read and write GPS and other file data, for example, you could export GPS data in a specific format to view the motion tracking in the map software, or read and write files as a common card reader.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eUART Parameter setting:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBaud rate (\u003cstrong\u003edefault: 9600bps\u003c\/strong\u003e)\u003c\/li\u003e\n\u003cli\u003eStart bit (1 bit)\u003c\/li\u003e\n\u003cli\u003eStop bit (1 bit)\u003c\/li\u003e\n\u003cli\u003eCheck bit (None)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"product-features\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with Atom Matrix\/Atom Lite\u003c\/li\u003e\n\u003cli\u003eHigh signal acquisition sensitivity\u003c\/li\u003e\n\u003cli\u003eSupport single system positioning of BDS \/ GPS \/ GLONASS \/ Galileo \/ SBAS \/ QZSS multiple satellite navigation systems\u003c\/li\u003e\n\u003cli\u003eBuilt in self elastic TF (microSD) card slot\u003c\/li\u003e\n\u003cli\u003eLow power\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Code: \u003c\/strong\u003eK043\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency accuracy: \u003c\/strong\u003eGPS L1, GLONASS L1, BDS B1, GALILEO E1, SBAS L1, QZSS L1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccuracy: \u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eHorizontal: 2m\u003c\/li\u003e\n\u003cli\u003eSpeed: 0.1m\/s\u003c\/li\u003e\n\u003cli\u003eTime: 1us\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannels:\u003c\/strong\u003e 72 search channel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUpdate frequency: \u003c\/strong\u003e1-10Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum speed: \u003c\/strong\u003e515m\/s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum acceleration: \u003c\/strong\u003e\u0026lt; 4g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSensitivity: \u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eTrace: - 167dbm\u003c\/li\u003e\n\u003cli\u003eCapture: - 160dBm\u003c\/li\u003e\n\u003cli\u003eCold start: - 148dbm\u003c\/li\u003e\n\u003cli\u003eHot start: - 156dbm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStart time: \u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eCold start: 26 seconds\u003c\/li\u003e\n\u003cli\u003eWarm start: 25 seconds\u003c\/li\u003e\n\u003cli\u003eHot start: 1 second\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBaud rate: default: \u003c\/strong\u003e9600bps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput protocol: \u003c\/strong\u003eNMEA-0183\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNMEA sentence: \u003c\/strong\u003eRMC, VTG, GGA, GSA, GSV, GLL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFLASH: \u003c\/strong\u003e4M FLASH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndicator light:\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eTX: the power on blue light flashes, indicating that there is data output\u003c\/li\u003e\n\u003cli\u003ePPS:3D Blink after positioning, and it will not light if it is not positioned\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking temperature: \u003c\/strong\u003e-40°C - 85°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet weight: \u003c\/strong\u003e28g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGross weight: \u003c\/strong\u003e38g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct size: \u003c\/strong\u003e24*48*18mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage size: \u003c\/strong\u003e54*54*20mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"applications\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eVehicle and ship positioning and navigation\u003c\/li\u003e\n\u003cli\u003eTrack record\u003c\/li\u003e\n\u003cli\u003eFile reading and writing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"include\"\u003e\u003cstrong\u003ePart List:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x ATOM GPS\u003c\/li\u003e\n\u003cli\u003e1x ATOM Lite\u003c\/li\u003e\n\u003cli\u003e1x Hex Key\u003c\/li\u003e\n\u003cli\u003e1x M2*3mm Hexagon self tapping screw\u003c\/li\u003e\n\u003cli\u003e1x M2*8mm Hexagon socket cup head machine screw\u003c\/li\u003e\n\u003cli\u003e1x TYPE-C USB Cable(20cm)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"M5Stack","offers":[{"title":"Default Title","offer_id":42292885225663,"sku":"MLE03362","price":2200.0,"currency_code":"PHP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0531\/3419\/6927\/files\/MLE03362.jpg?v=1746767476"},{"product_id":"mini-heart-rate-unit-max30100-pulse-oximeter","title":"M5Stack Mini Heart Rate Unit (MAX30100) Pulse Oximeter","description":"\u003ch2\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eHEART\u003c\/strong\u003e is built using the \u003cstrong\u003eMAX30100\u003c\/strong\u003e chipset.\u003c\/p\u003e\n\u003cp\u003eMAX30100 is a complete pulse oximetry and heart-rate sensor system solution designed for the demanding requirements of wearable devices.\u003c\/p\u003e\n\u003cp\u003eThe MAX30100 provides very small total solution size without sacrificing optical or electrical performance. Minimal external hardware components are needed for integration into a wearable device.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHow do we use this Unit to test the heart rate?\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp style=\"padding-left: 40px;\"\u003e\u003cstrong\u003ePut your finger on the detection area.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWhat is the communication protocol between M5 core and this unit?\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp style=\"padding-left: 40px;\"\u003e\u003cstrong\u003eI2C(0x57)\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2 id=\"product-features\"\u003e\u003cstrong\u003eFeatures: \u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProgrammable Sample Rate and LED Current for Power Savings\u003c\/li\u003e\n\u003cli\u003eUltra-Low Shutdown Current (0.7µA, typ)\u003c\/li\u003e\n\u003cli\u003eAdvanced Functionality Improves Measurement Performance\u003c\/li\u003e\n\u003cli\u003eHigh Sample Rate Capability\u003c\/li\u003e\n\u003cli\u003eFast Data Output Capability\u003c\/li\u003e\n\u003cli\u003eGROVE interface\u003c\/li\u003e\n\u003cli\u003eSoftware Develop platform: Arduino\u003c\/li\u003e\n\u003cli\u003eTwo Lego-compatible holes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Code:\u003c\/strong\u003e U029\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommunication protocol:\u003c\/strong\u003e I2C:0x57\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet weight: \u003c\/strong\u003e5g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGross weight: \u003c\/strong\u003e18g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Size:\u003c\/strong\u003e 32*24*8mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Size: \u003c\/strong\u003e67*53*12mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"include\"\u003e\u003cstrong\u003ePart List:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x HEART Unit\u003c\/li\u003e\n\u003cli\u003e1x Grove Cable\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"M5Stack","offers":[{"title":"Default Title","offer_id":42292885291199,"sku":"MLE03366","price":750.0,"currency_code":"PHP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0531\/3419\/6927\/files\/MLE03366_4.jpg?v=1745830392"},{"product_id":"lcd-unit-1-14-135-x-240-pixels-display","title":"M5Stack LCD Unit 1.14\" 135x240 Pixels Display","description":"\u003ch2\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eLCD Unit\u003c\/strong\u003e\u003cspan\u003e is a 1.14-inch color LCD expansion screen unit designed for displaying simple content as a display panel. It features a resolution of 135x240 pixels and utilizes the ST7789V2 drive scheme. The LCD Unit supports RGB666 display, allowing for the representation of 262,144 colors.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe unit incorporates an ESP32-PICO control core internally, which comes with built-in firmware. This integration simplifies the development process for display-related functionalities. The ESP32-PICO provides control and management of the LCD Unit, as well as support for firmware upgrades. Communication with the unit is achieved through the I2C interface, with the specified address for control being 0x3E.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe back of the LCD screen features a magnetic design, enabling easy and secure fixation on metal surfaces. This design provides convenience when integrating the LCD Unit into various instruments or control devices.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eLCD Unit is suitable for embedding in a wide range of applications where a compact and simple display panel is required. It can be utilized in instruments, control devices, and other systems that need to present basic information or visual feedback.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 id=\"product-features\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1.14inch color LCD display panel\u003c\/li\u003e\n\u003cli\u003eST7789V2 drive scheme\u003c\/li\u003e\n\u003cli\u003eI2C communication interface\u003c\/li\u003e\n\u003cli\u003e135*240 resolution\u003c\/li\u003e\n\u003cli\u003eViewing angle: full viewing angle\u003c\/li\u003e\n\u003cli\u003eMagnetic back design\u003c\/li\u003e\n\u003cli\u003eSupport I2C firmware upgrade\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Code: \u003c\/strong\u003eU120\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScreen driver IC: \u003c\/strong\u003eST7789V2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking current: \u003c\/strong\u003e45.7mA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommunication protocol:\u003c\/strong\u003e I2C address: 0x3E\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplay Size: \u003c\/strong\u003e1.14 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePixel pitch:\u003c\/strong\u003e 0.1101(H) x 0.1038(V) mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResolution: \u003c\/strong\u003e135*240\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eViewable: \u003c\/strong\u003eFull view\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Temperature: \u003c\/strong\u003e0°C to 60°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet Weight: \u003c\/strong\u003e8.5g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGross Weight: \u003c\/strong\u003e20g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct size:\u003c\/strong\u003e 48 * 24 * 8mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePacking size: \u003c\/strong\u003e67 * 52 * 12.5mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCase material: \u003c\/strong\u003ePlastic ( PC )\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"applications\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eInformation display\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"include\"\u003e\u003cstrong\u003ePart List:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Unit LCD\u003c\/li\u003e\n\u003cli\u003e1x HY2.0-4P Cable\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"M5Stack","offers":[{"title":"Default Title","offer_id":42292885356735,"sku":"MLE03363","price":1200.0,"currency_code":"PHP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0531\/3419\/6927\/files\/MLE03363.jpg?v=1746768713"},{"product_id":"ncir-non-contact-infrared-thermometer-sensor-unit-mlx90614","title":"M5Stack NCIR Temperature Sensor Unit (MLX90614)","description":"\u003ch2\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eNCIR\u003c\/strong\u003e featured with built-in infrared \u003cstrong\u003eMLX90614\u003c\/strong\u003e sensor, It can be used to measure the surface temperature of a human body or other object.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNCIR\u003c\/strong\u003e\u003cspan\u003e is a single-point infrared temperature sensor. It incorporates the \u003c\/span\u003e\u003cstrong\u003eMLX90614\u003c\/strong\u003e\u003cspan\u003e infrared sensor, capable of measuring the surface temperature of human bodies or other objects.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eUnlike most contact-based sensors, this sensor detects temperature by measuring the infrared radiation emitted by distant objects. It does not require physical contact, allowing for a wider temperature measurement range of -70°C to +380°C. With a 90° field of view, it can conveniently and quickly measure the average temperature at a specific location.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThis unit is connected to the M5Core through PORT A I2C (address 0x5A).\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 id=\"product-features\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOperating voltage: 4.5 to 5.5V\u003c\/li\u003e\n\u003cli\u003eMeasuring object temperature range: -70°C ~ 380°C\u003c\/li\u003e\n\u003cli\u003eMeasuring ambient temperature range: -40 to 125 ?C\u003c\/li\u003e\n\u003cli\u003eMeasurement accuracy at room temperature: ±0.5°C\u003c\/li\u003e\n\u003cli\u003eField of view: 90°\u003c\/li\u003e\n\u003cli\u003eSoftware Development Platform: Arduino, UIFlow (Blockly, Python)\u003c\/li\u003e\n\u003cli\u003eTwo Lego-compatible holes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Code: \u003c\/strong\u003eU028\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommunication protocol:\u003c\/strong\u003e I2C:0x5A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet weight:\u003c\/strong\u003e 4g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGross weight:\u003c\/strong\u003e 16g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Size:\u003c\/strong\u003e 32*24*8mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Size: \u003c\/strong\u003e67*53*12mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"applications\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBody Temperature Measurement\u003c\/li\u003e\n\u003cli\u003eObject (biological) Motion Detection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"include\"\u003e\u003cstrong\u003ePart List:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x NCIR Unit\u003c\/li\u003e\n\u003cli\u003e1x Grove Cable\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"M5Stack","offers":[{"title":"Default Title","offer_id":42292885389503,"sku":"MLE03368","price":1500.0,"currency_code":"PHP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0531\/3419\/6927\/files\/MLE03368.jpg?v=1746000379"},{"product_id":"mini-angle-unit-rotary-switch-with-potentiometer","title":"M5Stack Mini Angle Unit with Potentiometer","description":"\u003ch2\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eANGLE\u003c\/strong\u003e is a rotary switch Unit which simply includes a \u003cstrong\u003e10K\u003c\/strong\u003e Ohm potentiometer inside. This unit can be used for Continuous signal rotatory control for applications such as volume, brightness, or motor speed.\u003c\/p\u003e\n\u003cp\u003eA potentiometer is a manually adjustable variable resistor with three terminals: Two terminals are connected to a resistive element, the third terminal is connected to an adjustable wiper. The position of the wiper determines the output voltage.\u003c\/p\u003e\n\u003ch2 id=\"product-features\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOutput voltage range: 0 ~ 2500mV\u003c\/li\u003e\n\u003cli\u003eGROVE interface, support \u003ca href=\"http:\/\/flow.m5stack.com\/\" rel=\"noopener\" target=\"_blank\"\u003eUIFlow \u003c\/a\u003eand \u003ca href=\"http:\/\/www.arduino.cc\/\" rel=\"noopener\" target=\"_blank\"\u003eArduino\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eTwo Lego-compatible holes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Code: \u003c\/strong\u003eU005\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput voltage:\u003c\/strong\u003e 0 ~ 2500mV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet weight:\u003c\/strong\u003e 6g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGross weight:\u003c\/strong\u003e 23g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Size:\u003c\/strong\u003e 32*24*22mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Size:\u003c\/strong\u003e 73*46*30mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"include\"\u003e\u003cstrong\u003ePart List:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x ANGLE Unit\u003c\/li\u003e\n\u003cli\u003e1x Grove Cable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"M5Stack","offers":[{"title":"Default Title","offer_id":42292885455039,"sku":"MLE03369","price":269.0,"currency_code":"PHP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0531\/3419\/6927\/files\/MLE03369.jpg?v=1745995561"},{"product_id":"uhf-rfid-unit-jrd-4035","title":"M5Stack UHF RFID Unit","description":"\u003cdiv data-docx-has-block-data=\"false\" data-lark-html-role=\"root\" data-page-id=\"POKCdgGPTobwRbxIDQplHVnag8f\"\u003e\n\u003ch2 class=\"heading-3 ace-line old-record-id-Uga4dAnvCollzLxhzIblsWeOgJg\"\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cdiv class=\"ace-line ace-line old-record-id-JzAxdwUK3onZKHxj6WrlmDQGgQb\"\u003e\n\u003cstrong\u003eUHF-RFID\u003c\/strong\u003e is an embedded wireless radio frequency reader module operating in the ultra-high frequency (UHF) range. It utilizes the JRD-4035 module solution, which includes a built-in ceramic antenna. This eliminates the need for users to equip additional antennas, providing a more convenient and reliable solution.\u003c\/div\u003e\n\u003cdiv class=\"ace-line ace-line old-record-id-JzAxdwUK3onZKHxj6WrlmDQGgQb\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"ace-line ace-line old-record-id-JzAxdwUK3onZKHxj6WrlmDQGgQb\"\u003eThe module is optimized for RF design, ensuring low power consumption and high performance. With a transmission power of 100mW, it can achieve an effective reading distance of more than 1.5 meters. This allows for efficient and reliable reading of UHF RFID tags within the module's range.\u003c\/div\u003e\n\u003cdiv class=\"ace-line ace-line old-record-id-JzAxdwUK3onZKHxj6WrlmDQGgQb\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"ace-line ace-line old-record-id-JzAxdwUK3onZKHxj6WrlmDQGgQb\"\u003eUHF-RFID module communicates via a serial interface and is compatible with a built-in encapsulated AT command set. This enables plug-and-play functionality and simplifies the development and integration process. The module provides a user-friendly experience for both development and usage.\u003c\/div\u003e\n\u003cdiv class=\"ace-line ace-line old-record-id-JzAxdwUK3onZKHxj6WrlmDQGgQb\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"ace-line ace-line old-record-id-JzAxdwUK3onZKHxj6WrlmDQGgQb\"\u003eUHF-RFID module is well-suited for various application scenarios, including warehousing logistics management and smart retail. In warehousing logistics, it enables efficient tracking and management of inventory and assets. In smart retail, it can be used for inventory management, anti-theft systems, and customer engagement. The module can handle multiple product tags simultaneously, meeting the requirements of monitoring and reading multiple RFID tags in different applications.\u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003ch2 class=\"heading-3 ace-line old-record-id-D13idQ8eooLz2sxK51PlhCRTgac\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStable recognition distance:\u003c\/strong\u003e 1.5m-2m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking spectrum range:\u003c\/strong\u003e 840-960MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir interface protocol: \u003c\/strong\u003eEPCglobal UHF Class 1 Gen 2, ISO 18000-6C\u003cstrong\u003e\u003cspan class=\"lark-record-clipboard\" data-lark-record-format=\"docx\/text\" data-lark-record-data='{\"rootId\":\"POKCdgGPTobwRbxIDQplHVnag8f\",\"text\":{\"initialAttributedTexts\":{\"text\":{\"0\":\"EPCglobal UHF Class 1 Gen 2\"},\"attribs\":{\"0\":\"*0+r\"}},\"apool\":{\"numToAttrib\":{\"0\":[\"author\",\"7384599038185734175\"]},\"nextNum\":1}},\"type\":\"bullet\",\"referenceRecordMap\":{},\"extra\":{\"channel\":\"saas\",\"isEqualBlockSelection\":true,\"pasteRandomId\":\"df321310-b125-468a-93aa-2c7b83911a1a\",\"mention_page_title\":{},\"external_mention_url\":{}},\"isKeepQuoteContainer\":false,\"isFromCode\":false,\"selection\":[{\"id\":14,\"type\":\"text\",\"selection\":{\"start\":0,\"end\":27},\"recordId\":\"YB6VdbHDooz7g7xaq8QlMaCIglG\"}],\"payloadMap\":{},\"isCut\":false}'\u003e\u003c\/span\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eUART communication interface (baud rate: 115200bps)\u003c\/li\u003e\n\u003cli\u003eThe buffer area can hold up to 200 tags\u003c\/li\u003e\n\u003cli\u003eTag recognition is sensitive and stable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 class=\"heading-3 ace-line old-record-id-NuwTdkkqco4zevxw2pQlX3mXg1g\"\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnit Code: \u003c\/strong\u003e(JRD-4035) | U107\u003cstrong\u003e \u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir interface protocol: \u003c\/strong\u003eEPCglobal UHF Class 1 Gen 2 \/ ISO 18000-6C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWork area support:\u003c\/strong\u003e US, Canada and other regions following U.S.FCC. Europe and other regions following ETSI EN 302 208, Mainland China, Japan, Korea, Malaysia, Taiwan\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking spectrum range:\u003c\/strong\u003e 840-960MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput power range:\u003c\/strong\u003e 18-26 dBm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTag cache area:\u003c\/strong\u003e 200 tags\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommunication protocol:\u003c\/strong\u003e UART (Baud rate: 115200bps)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet weight:\u003c\/strong\u003e 41g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGross weight:\u003c\/strong\u003e 58.8g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct size:\u003c\/strong\u003e 56*48*11.5mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage size:\u003c\/strong\u003e 88*61*21mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShell material:\u003c\/strong\u003e Plastic (PC)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 class=\"heading-3 ace-line old-record-id-HftwdXYg9oBwjZxXl5DlsY0aguc\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul class=\"list-bullet1\" start=\"1\"\u003e\n\u003cli\u003eWarehouse logistics pallet management\u003c\/li\u003e\n\u003cli\u003eVehicle management\u003c\/li\u003e\n\u003cli\u003eSmart retail\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 class=\"heading-3 ace-line old-record-id-RTb5dvfEcoeJ3JxAeRwlVIi7gGe\"\u003e\u003cstrong\u003ePart List:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x UHF-RFID\u003c\/li\u003e\n\u003cli\u003e1x HY2.0 cable (5CM)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n\u003cstrong\u003eModel Size:\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/h2\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0531\/3419\/6927\/files\/f7d7c897f798fc44c391847188c3ac79.jpg?v=1745799927\"\u003e\u003c\/p\u003e","brand":"M5Stack","offers":[{"title":"Default Title","offer_id":42292885553343,"sku":"MLE03376","price":5350.0,"currency_code":"PHP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0531\/3419\/6927\/files\/MLE03376_1.jpg?v=1745304103"},{"product_id":"m5stamp-rs485-module","title":"M5Stack M5Stamp RS485 Module","description":"\u003ch2\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eSTAMP PWR485\u003c\/strong\u003e is an RS485 communication expansion board, that converts the 3.3V TTL level of the MCU serial port into a differential signal compatible with the RS485 standard. With a compact size 20* 4.6* 23mm, it can be integrated into various embedded devices for RS485 communication interface expansion. Suitable for RS485 sensor data acquisition, Modbus bus node communication, and other applications.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003ch2\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSP485EEN-L\/TR(RS485 transceiver)\u003c\/li\u003e\n\u003cli\u003e2x RS485 interface expansion (parallel), can be connected to two devices at one time\u003c\/li\u003e\n\u003cli\u003eRed LED indicator\u003c\/li\u003e\n\u003cli\u003eThe PWR485 interface supports 9-24V DC input, internal DCDC step-down to 5V to power the module and main control.\u003c\/li\u003e\n\u003cli\u003eBaud rate.\n\u003cul\u003e\n\u003cli\u003eStable communication baud rate: 9600bps\/115200bps\u003c\/li\u003e\n\u003cli\u003eMaximum communication baud rate test: 128000bps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eMultiple soldering options\n\u003cul\u003e\n\u003cli\u003eThree types soldering options are available (SMT, DIP, Jumper wire),\u003c\/li\u003e\n\u003cli\u003eWith high-temperature resistant plastic enclosure, Peak temperature = 230°C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003ch2\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Code:\u003c\/strong\u003e S001\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRS485 Transceiver: \u003c\/strong\u003eSP485EEN-L\/TR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput Voltage\u003c\/strong\u003e: PWR485 interface supports 9-24V input power \/ TTL side input voltage 5V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended operating baud rate: \u003c\/strong\u003e9600bps\/115200bps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Current:\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eDC5V@3.2mA\u003c\/li\u003e\n\u003cli\u003eDC12V@2.8mA\u003c\/li\u003e\n\u003cli\u003eDC24V@2.1mA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput Logic Level:\u003c\/strong\u003e 3.3V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet Weight:\u003c\/strong\u003e 5.1g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGross Weight:\u003c\/strong\u003e 7.3g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Size:\u003c\/strong\u003e 20*4.6*23mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Size:\u003c\/strong\u003e 93*138mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRS485 communication\u003c\/li\u003e\n\u003cli\u003eModbus device communication\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003ePart List:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x STAMP PWR485\u003c\/li\u003e\n\u003cli\u003e1x HT3.96-4P female connector\u003c\/li\u003e\n\u003cli\u003e2x HY2.0-4P female connector (blue + white)\u003c\/li\u003e\n\u003cli\u003e1x HEX Key 1.5mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e","brand":"M5Stack","offers":[{"title":"Default Title","offer_id":42292900462783,"sku":"MLE03924","price":450.0,"currency_code":"PHP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0531\/3419\/6927\/files\/MLE03924.jpg?v=1745999511"},{"product_id":"m5stamp-c3u-mate-with-pin-header","title":"M5Stack M5Stamp C3U Mate with Pin Header","description":"\u003ch2\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003cspan\u003e\u003cstrong\u003eM5Stamp C3U\u003c\/strong\u003e is a cutting-edge development board featuring the ESPRESSIF ESP32-C3 RISC-V MCU. Equipped with Wi-Fi 5 (LE) connectivity, this board is designed for a wide range of applications, including home appliances and industrial automation. With top-of-the-line security features such as RSA-3072-based secure boot and AES-128-XTS-based flash encryption, the M5Stamp C3U ensures robust protection for your data. Its compact size and powerful functionality make it an ideal choice for various IoT scenarios.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe M5Stamp C3U is built around a 32-bit RISC-V microcontroller, operating at a maximum clock frequency of 160 MHz. With 400 KB of internal RAM and 4 MB Flash memory, it provides ample resources to support diverse connected device use cases. This versatility enables seamless integration into a wide range of projects and applications.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eFurthermore, the M5Stamp C3U features an exceptional heat-resistant plastic enclosure, allowing it to operate reliably even at higher temperatures. This ensures the board's durability and stability, making it suitable for demanding environments.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe M5Stamp C3U combines the power of the ESPRESSIF ESP32-C3 RISC-V MCU, Wi-Fi 5 (LE) connectivity, advanced security features, and a compact form factor, making it a highly adaptable and capable development board. Whether you're working on smart home appliances or industrial automation solutions, the M5Stamp C3U provides the performance and reliability you need for your IoT projects.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e If you need to use SPIFFS filesystem in Arduino IDE. Please install a \u003c\/span\u003e\u003ca href=\"https:\/\/github.com\/lorol\/arduino-esp32fs-plugin\/releases\" target=\"_blank\"\u003epatch package\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003efirst.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003ch2\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMULTIPLE STYLE:\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eThree types soldering options are available (SMT, DIP, fly wire);\u003c\/li\u003e\n\u003cli\u003eHigh-temperature resistant plastic enclosure, Peak temperature = 230℃;\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHIGH INTEGRATION:\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eM5Stamp C3 contains 5V-\u0026gt;3.3V DC\/DC design, GPIOx14;\u003c\/li\u003e\n\u003cli\u003eUSB Type C port;\u003c\/li\u003e\n\u003cli\u003eProgrammable RGB LED x1, Reset button x1, button x1;\u003c\/li\u003e\n\u003cli\u003e3D antenna, providing stable and reliable wireless communication.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDEVELOPMENT PLATFORM:\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eArduino, ESP32-IDF (UIFlow support coming soon)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Code: \u003c\/strong\u003e K122\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eESP32-C3:\u003c\/strong\u003e 32bit RISC-V single-core processor, clocked at 160 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStorage:\u003c\/strong\u003e 384KB ROM, 400KB SRAM, 8KB RTC SRAM, 4MB FLASH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWi-Fi:\u003c\/strong\u003e 2.4 GHz band supports 20 MHz and 40 MHz bandwidth, IEEE 802.11 b\/g\/n protocol, data rate up to 150 Mbps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput voltage: \u003c\/strong\u003e5V @ 500mA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHMI:\u003c\/strong\u003e Programmable physical button x 1, reset debugging button x 1, programmable RGB LED (SK6812) x 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB interface:\u003c\/strong\u003e TypeC x1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAntenna Type:\u003c\/strong\u003e 2.4G 3D Antenna\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModule peripheral interface resources: \u003c\/strong\u003eADC, \u003cspan\u003eGPIO, SPI, UART, I2C, I2S, PWM, RMT, DMA, USB serial port, TWAI\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eIO interface x14: \u003c\/strong\u003eG0, G1, G3, G4, G5, G6, G7, G8, G9, G10, G18, G19, G21, G22\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eIO interface spacing:\u003c\/strong\u003e 2.54mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003cstrong\u003eFixing screw specifications:\u003c\/strong\u003e M2*4 countersunk head hexagon socket mechanical \u003c\/span\u003e\u003cspan\u003eteeth\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eNet weight: \u003c\/strong\u003e3.8g\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eProduct size:\u003c\/strong\u003e 34 * 20 * 4.6mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003ePacking size:\u003c\/strong\u003e 85*55mm sealing bag (translucent)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eApplications: \u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDIY, Prototyping\u003c\/li\u003e\n\u003cli\u003eIndustrial Automation\u003c\/li\u003e\n\u003cli\u003eSmart Home\u003c\/li\u003e\n\u003cli\u003eWearable Devices\u003c\/li\u003e\n\u003cli\u003eMedical Devices\u003c\/li\u003e\n\u003cli\u003eConsumer Electronics\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp style=\"padding-left: 40px;\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e The newly updated C3U shares the same features as C3, but the difference is that M5Stamp C3U without the USB download chip and the program download method is different（(The C3U uses the ESP32-C3's built-in USB Serial for program download)）. If you are looking for a more affordable project, you can add this to your shopping list!\u003c\/p\u003e\n\u003cdiv style=\"padding-left: 40px;\"\u003e\u003cstrong\u003eProgram Download\/Notes\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv style=\"padding-left: 40px;\"\u003eEnter the program download mode operation:\u003c\/div\u003e\n\u003cdiv style=\"padding-left: 40px;\"\u003e1. Long press the center button (G9) of STAMP C3U under power failure condition.\u003c\/div\u003e\n\u003cdiv style=\"padding-left: 40px;\"\u003e2. Connect to the computer, after the port is successfully identified, program burning.\u003c\/div\u003e\n\u003cdiv style=\"padding-left: 40px;\"\u003e\u003cem\u003e\u003c\/em\u003e\u003c\/div\u003e\n\u003cdiv style=\"padding-left: 40px;\"\u003e\u003cem\u003eUSB CDC enabled:\u003c\/em\u003e\u003c\/div\u003e\n\u003cdiv style=\"padding-left: 40px;\"\u003eBy default, USB CDC is not enabled, the serial port output started by C3U will be output through UART0, if you need to output through USB, please use IDE to make it USB CDC before downloading the program option enabled. (Arduino users can enable it through Tools-\u0026gt;USB CDC on Boot-Enabled, IDF users please refer to ESP IDF official documentation.)\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"M5Stack","offers":[{"title":"Default Title","offer_id":42292900495551,"sku":"MLE03926","price":550.0,"currency_code":"PHP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0531\/3419\/6927\/files\/MLE03926_2.jpg?v=1746773889"},{"product_id":"m5stack-base-aaa-battery-holder","title":"M5Stack Base AAA Battery Holder","description":"\u003ch2 class=\"MsoNormal\"\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp class=\"MsoNormal\"\u003eBase AAA is a '5x5cm' series base with 4 x AAA Dry Batteries holder. Unlike other Lithium Battery Base, Base AAA is powered by safe and reliable dry batteries, and the onboard power switch allows for manual power shutdown, reducing battery drain. Port B and Port C are reserved for expansion, and 1X12-Pin 2.54 pitch female expansion connector is provided. There are mounting holes on the side for easy fixing and expansion. The bottom supports magnet and screw mounting.\u003c\/p\u003e\n\u003ch2 class=\"MsoNormal\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1X12-Pin 2.54 interface\u003c\/li\u003e\n\u003cli\u003ePort B, Port C\u003c\/li\u003e\n\u003cli\u003ePhysical power switch\u003c\/li\u003e\n\u003cli\u003eSupport two types of power supply:\n\u003cul\u003e\n\u003cli\u003ePower supply by four AAA Batteries, DC\/DC buck 6V -\u0026gt; 4V, connect with BUS bus BAT pin\u003c\/li\u003e\n\u003cli\u003eExternal power supply with Dupont cables, to BAT\/GND of the 12-Pin 2.54 interface\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eMultiple fixing methods:\n\u003cul\u003e\n\u003cli\u003eMagnet fixing on the bottom\u003c\/li\u003e\n\u003cli\u003eTwo nuts on the bottom for screws\u003c\/li\u003e\n\u003cli\u003eThree fixing holes on the sid\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 class=\"MsoNormal\"\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli class=\"MsoNormal\"\u003e\n\u003cstrong\u003eProduct Code:\u003c\/strong\u003e A122\u003c\/li\u003e\n\u003cli class=\"MsoNormal\"\u003e\n\u003cstrong\u003eNet weight:\u003c\/strong\u003e 30g\u003c\/li\u003e\n\u003cli class=\"MsoNormal\"\u003e\n\u003cstrong\u003eGross weight:\u003c\/strong\u003e 51.2g\u003c\/li\u003e\n\u003cli class=\"MsoNormal\"\u003e\n\u003cstrong\u003eProduct Size:\u003c\/strong\u003e 54*54*21mm\u003c\/li\u003e\n\u003cli class=\"MsoNormal\"\u003e\n\u003cstrong\u003ePackage Size:\u003c\/strong\u003e 95 x 67 x 25mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 class=\"MsoNormal\"\u003e\u003cstrong\u003ePart List:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli class=\"MsoNormal\"\u003e1x Base AAA\u003c\/li\u003e\n\u003cli class=\"MsoNormal\"\u003e1x M2 Hex Key\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"M5Stack","offers":[{"title":"Default Title","offer_id":42292900561087,"sku":"MLE03934","price":650.0,"currency_code":"PHP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0531\/3419\/6927\/files\/MLE03934_3.jpg?v=1746837557"},{"product_id":"m5stack-atom-thermal-printer-kit","title":"M5Stack Atom Thermal Printer Kit","description":"\u003ch2\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eATOM Printer\u003c\/strong\u003e\u003cspan\u003e is a desktop DIY thermal printer that offers excellent value for its features and capabilities. It includes an ESP32-Pico based IoT controller called ATOM Lite, as well as a 58mm thermal printer, making it suitable for various printing requirements.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe printer supports printing text, graphics, barcodes, and QR codes, allowing for versatile printing applications. Whether you need to print labels, receipts, tickets, or other types of content, the ATOM Printer can handle it.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eATOM Lite serves as the brains of the printer, providing control and connectivity features. It is based on the ESP32-Pico chip, which offers powerful processing capabilities and supports various communication protocols.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eATOM Printer comes with built-in firmware that offers two modes: AP Connect Print and MQTT Notifications Print. The AP Connect Print mode allows you to connect to the printer directly via Wi-Fi access point mode, enabling easy configuration and printing. The MQTT Notifications Print mode allows you to receive notifications and print content from MQTT (Message Queuing Telemetry Transport) sources, adding a level of automation and integration with other IoT devices or systems.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e This kit excludes the power adapter. A \u003ccode\u003eDC 12V \/ 2.5A\u003c\/code\u003e power adapter (5.5mm jack) is recommended.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eATOM Lite: ESP32-Pico-D4 4MB Flash IoT controller\u003c\/li\u003e\n\u003cli\u003eSleek, Geekery kraft packaging design\u003c\/li\u003e\n\u003cli\u003eSupports for text\/graphics\/BarCode\/QRCode\u003c\/li\u003e\n\u003cli\u003eCommunication interface: UART\u003c\/li\u003e\n\u003cli\u003eFast printing, high resolution\u003c\/li\u003e\n\u003cli\u003eHow to use:\n\u003cul\u003e\n\u003cli\u003eAP hotspot connection, web-controlled printing\u003c\/li\u003e\n\u003cli\u003ePrinting content sent via MQTT (Topic is device Mac address)\u003c\/li\u003e\n\u003cli\u003eSerial command control (UART 9600bps 8N1)\u003c\/li\u003e\n\u003cli\u003eDevelopment platform: Arduino, UIFlow\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Code: \u003c\/strong\u003eK118\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrinting method:\u003c\/strong\u003e Thermal printing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupported text and graphics: \u003c\/strong\u003eText, graphics, characters, BarCode(Codebar, code93, code39, code128, ENA13, ITF25, UPC-A, UPC-E), QRCode\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupply voltage: \u003c\/strong\u003eDC 12V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking current: \u003c\/strong\u003e2.5A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrint color: \u003c\/strong\u003eMonochrome\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrint speed\/resolution: \u003c\/strong\u003e60mm\/s 203dpi 8 dots\/mm up to 384 dots per lin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrinting width: \u003c\/strong\u003e58mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eService life: \u003c\/strong\u003ePrinting distance 50km\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePaper Cut: \u003c\/strong\u003eBy Hands\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax. Diameter of Paper Roll: \u003c\/strong\u003e58mm±0.05mm (width) 0.05~0.1mm (thickness), maximum diameter ≤40mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrinting speed: \u003c\/strong\u003e60mm\/s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectivity Technology:\u003c\/strong\u003e USB\/RS232\/TTL (ATOM is connected to TTL interface by default UART 9600bps 8N1)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet weight: \u003c\/strong\u003e285g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGross weight: \u003c\/strong\u003e321g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct size: \u003c\/strong\u003e151 * 79 * 66mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage size: \u003c\/strong\u003e158 * 82 * 70mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCan be widely used in printing taxi bill, parking bill, express delivery invoice, restaurant order and so on.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003ePart List:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x ATOM LITE\u003c\/li\u003e\n\u003cli\u003e1x ATOM Printer\u003c\/li\u003e\n\u003cli\u003e1x thermal paper roll\u003c\/li\u003e\n\u003cli\u003e1x sticky thermal paper roll\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"M5Stack","offers":[{"title":"Default Title","offer_id":42292900593855,"sku":"MLE03931","price":4300.0,"currency_code":"PHP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0531\/3419\/6927\/files\/MLE03931.jpg?v=1746836829"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0531\/3419\/6927\/collections\/m5stakc.jpg?v=1721194015","url":"https:\/\/makerlab.ph\/collections\/m5stack-philippines.oembed","provider":"Makerlab PH","version":"1.0","type":"link"}